Floor Model Lathes

  • Layout
Knuth 7.4HP V-Turn 410 PRO Universal Lathe 300822 at Elite Metal Tools
Knuth 7.4HP V-Turn 410 PRO Universal Lathe 300822
  • Center height: 8”
  • Turning diameter over bed: 15”
  • Turning-Ø over support: 10”
  • Gap bridge length: 10”
$26,992.11
As low as $534/mo
View Details
Jet GHB-1340A Lathe With Newall NMS300 DRO 323131 at Elite Metal Tools
Jet GHB-1340A Lathe With Newall NMS300 DRO 323131
  • 6" 3-jaw direct mount chuck with top reversing jaw
  • Compound and cross slide have backlash elimination
  • Fast, easy speed changes
  • Hardened and ground gears are featured in the headstock and gearbox
  • Image shown with optional bench, p/n 321443AK
$14,695.71
$12,129.00
As low as $394/mo
View Details
Knuth 2HP Basic 170 Super Pro Universal Lathe 300814 at Elite Metal Tools
Knuth 2HP Basic 170 Super Pro Universal Lathe 300814
  • Center height: 7”
  • Turning-Ø over support: 9”
  • Bed width: 7”
  • Center width: 39.37”
$15,215.83
As low as $301/mo
View Details
Baileigh Precision Metal Lathe PL-2080 at Elite Metal Tools
Baileigh Precision Metal Lathe PL-2080
  • Capacity: 20" Swing Over Bed, 80" Between Centers
  • 12-Step Spindle Speed
  • 12"-Three-Jaw Chuch
  • Mitutoyo 2-Axis DRO - Standard
$59,584.29
$48,499.00
As low as $959/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X, Y-Axis JET Powerfeeds 894347 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X, Y-Axis JET Powerfeeds 894347
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
$39,374.29
$32,049.00
As low as $634/mo
View Details
Knuth 5.4HP Basic 180 V Mechanics Lathe 300807 at Elite Metal Tools
Knuth 5.4HP Basic 180 V Mechanics Lathe 300807
  • Turning diameter over bed: 14”
  • Gap bridge length: 8”
  • Bed width: 8”
  • 5 Year Parts Warranty 
$18,655.56
As low as $369/mo
View Details
Jet EGH-1740 With ACU-RITE 303 DRO With Taper Attachment and Collet Closer 892510 at Elite Metal Tools
Jet EGH-1740 With ACU-RITE 303 DRO With Taper Attachment and Collet Closer 892510
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
$57,907.14
$47,269.00
As low as $935/mo
View Details
Jet E-1236VS, Elite 12x36 EVS Lathe 892000 at Elite Metal Tools
Jet E-1236VS, Elite 12x36 EVS Lathe 892000
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
$19,522.86
$15,899.00
As low as $314/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO 894344 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO 894344
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
$35,983.43
$29,289.00
As low as $579/mo
View Details
Jet GH-1440-3 Geared Head Lathe 322840 at Elite Metal Tools
Jet GH-1440-3 Geared Head Lathe 322840
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
$18,427.14
$14,999.00
As low as $487/mo
View Details
Jet GH-1860ZX, 3-1/8" Spindle Bore Geared Head Lathe 321960 at Elite Metal Tools
Jet GH-1860ZX, 3-1/8" Spindle Bore Geared Head Lathe 321960
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
$34,248.57
$28,299.00
As low as $560/mo
View Details
Knuth 2HP Basic 170 Super Mechanics Lathe 300815 at Elite Metal Tools
Knuth 2HP Basic 170 Super Mechanics Lathe 300815
  • Turning diameter over bed: 13”
  • Center width: 39.37”
  • Spindle speed: 70 rpm - 2000 rpm
  • 5 Year Parts Warranty 
$13,231.67
As low as $430/mo
View Details
Jet GHB-1340A With CBS-1340A Stand 321101AK at Elite Metal Tools
Jet GHB-1340A With CBS-1340A Stand 321101AK
  • 6" 3-jaw direct mount chuck with top reversing jaw
  • Compound and cross slide have backlash elimination
  • Fast, easy speed changes
  • Hardened and ground gears are featured in the headstock and gearbox
  • Image shown with optional bench, p/n 321443AK
$12,071.43
$9,739.00
As low as $316/mo
View Details
Jet BDB-1340A Lathe With Newall NMS300 DRO 323130 at Elite Metal Tools
Jet BDB-1340A Lathe With Newall NMS300 DRO 323130
  • 6" 3-jaw direct mount scroll chuck with top reversing jaws
  • Automatic feeding and threading are fully interlocked
  • Carriage mounted spindle control lever
  • Centers and headstock center sleeves
  • Helical cut headstock gears reduce noise
$14,128.57
$11,539.00
As low as $375/mo
View Details
Jet GHB-1340A With Taper Attachment 321119 at Elite Metal Tools
Jet GHB-1340A With Taper Attachment 321119
  • 6" 3-jaw direct mount chuck with top reversing jaw
  • Compound and cross slide have backlash elimination
  • Gearbox gives wide inch threading and feed capabiltites with no gear changes
  • Hardened and ground gears are featured in the headstock and gearbox
  • Image shown with optional bench, p/n 321443AK
$15,250.00
$12,499.00
As low as $406/mo
View Details
Jet EGH-1740 With ACU-RITE 203 DRO With Taper Attachment 892504 at Elite Metal Tools
Jet EGH-1740 With ACU-RITE 203 DRO With Taper Attachment 892504
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
$56,081.26
$45,759.00
As low as $905/mo
View Details
Jet GH-2680ZH, 4-1/8" Spindle Bore Geared Head Lathe 321860 at Elite Metal Tools
Jet GH-2680ZH, 4-1/8" Spindle Bore Geared Head Lathe 321860
  • 12" 3 Jaw scroll chuck with top reversing jaws
  • 2 Steady rests with roller bearings
  • Bed ways are induction hardened and ground for durability
  • E-Stop on Carriage for added safety
  • Electronic Chuck Key Holder
$56,292.86
$45,799.00
As low as $906/mo
View Details
Jet EVS-949 Mill with 2-Axis ACU-RITE 303 DRO 894330 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis ACU-RITE 303 DRO 894330
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
$34,337.14
$27,949.00
As low as $553/mo
View Details
Knuth 10.1HP 39" Center Width Turnado 230/1000 PRO Universal Lathe 320562 at Elite Metal Tools
Knuth 10.1HP 39" Center Width Turnado 230/1000 PRO Universal Lathe 320562
  • Center height: 9”
  • Turning-Ø over support: 9”
  • Center width: 39.37”
  • Bed width: 12”
$36,629.17
As low as $724/mo
View Details
Jet GH-1440ZX, 3-1/8" Spindle Bore Geared Head Lathe 321910 at Elite Metal Tools
Jet GH-1440ZX, 3-1/8" Spindle Bore Geared Head Lathe 321910
  • One-piece cast iron base absorbs vibration allowing heavier cuts
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
$30,775.71
$25,399.00
As low as $502/mo
View Details
Jet GHB-1340A With Collet Closer 321124 at Elite Metal Tools
Jet GHB-1340A With Collet Closer 321124
  • 6" 3-jaw direct mount chuck with top reversing jaw
  • Compound and cross slide have backlash elimination
  • Fast, easy speed changes
  • Hardened and ground gears are featured in the headstock and gearbox
  • Image shown with optional bench, p/n 321443AK
$14,510.00
$11,899.00
As low as $386/mo
View Details
On Sale
Knuth 7.4HP V-Turn 410/1000 Precision Lathe 300820 at Elite Metal Tools
Knuth 7.4HP V-Turn 410/1000 Precision Lathe 300820
  • Center height: 8”
  • Turning diameter over bed: 15”
  • Turning-Ø over support: 10”
  • Gap bridge length: 10”
$23,592.11
As low as $466/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X-Axis JET Powerfeed 894345 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X-Axis JET Powerfeed 894345
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
$37,740.29
$30,719.00
As low as $607/mo
View Details
Knuth 10.1HP 59" Center Width Turnado 280/1500 PRO Universal Lathe 320564 at Elite Metal Tools
Knuth 10.1HP 59" Center Width Turnado 280/1500 PRO Universal Lathe 320564
  • Center height: 11”
  • Turning-Ø over support: 14”
  • Center width: 59.06"
  • Bed width: 14”
$43,611.94
As low as $863/mo
View Details