Lathes

  • Horsepower: 3 HP TEFC
  • Ram Travel: 4-11/16” (120mm)
  • Working Distance Between Centers: 20” to 40”
  • Swing Over Bed: 23-7/32” to 31-1/4”
$4,999.99
$4,499.99
  • Maximum working length 47”
  • Maximum working length with copier 43”
  • Maximum working diameter (hand turning) 16”
  • Spindle speeds (RPM): 570 / 1,000 / 1,850 / 2,500
  • Brass-tipped knockout bar concentrates the action in the sliding handle; the brass tip will not damage drive centers
  • Digital RPM readout for accurate speed adjustments
  • Redesigned tool rest geometry allows for better chisel movement along the tool rest
  • Set of dead centers which hold a spindle for visual comparison
  • Sliding headstock with electronic variable speed
$6,019.99
$4,899.99
  • 18" Swing Over Bed
  • 42" Distance Between Centers
  • 6" Face Plate
  • 9/16" Spindle Bore
$4,341.00
$3,925.00
  • Motor: 2HP, 220 Volt, Single Phase
  • Max. Outboard Swing: 32”
  • Swing over Bed: 18”
  • Distance between Centers: 36”
  • Maintain speeds as low as 15 RPM
  • Adjustable riser blocks for 4 inches of height adjustment, allowing maximum comfort when turning
  • Extended spindle nose increased access to the work piece
  • Fully enclosed VFD for increased user protection
  • Magnetic-backed moveable control box for versatility and safety
$7,002.84
$5,699.99
  • Motor: 2 HP, 220V, 3-phase with single-phase VFD
  • Swing over bed: 16"
  • Distance between centers: 42"
  • Variable-speed spindle control with digital readout
  • Able to maintain speeds as low as 15 RPM, and as high as 3200 RPM. This allows for precise selection depending on workpiece material.
  • Fully enclosed VFD for increased user protection with main power disconnect switch located on rear of headstock
  • Banjo features a non-marring, pinch style clamp for solid tool rest placement
  • Digital indexing readout simplifies the indexing process for added precision
  • Magnetic-backed moveable control box for versatility and safety
  • Swing Over Bed: 12”
  • Swing Over Bed Gap: 15”
  • Length (Bed): 56”
  • Variable Speed: 500-3000 RPM
  • Acme thread in Tailstock
  • CSA Certified
  • Easy-to-read RPM display
  • Headstock slides for maximum versatility
  • Improved tailstock quill locking with anti-rotation key
$2,985.42
$2,429.99
  • Motor: 2 HP, 220V, 3-phase
  • Power requirement: 220V, single-phase, 60Hz, 15A
  • Swing over bed: 16"
  • Spindle bore: 3/8"


 

  • 1/3 Horse Power
  • 110V
  • 60 HZ
  • 45 lbs
$499.99
$459.99
  • Motor: 1.5HP, 110 Volt, Single Phase
  • Max. Outboard Swing: 32”
  • Swing over Bed: 18”
  • Distance between Centers: 36”
  • 20" Swing & 60" between centers
  • 220V, 1PH
  • 300-3600 Spindle Travel
  • 3HP Motor
$7,579.06
$6,169.00
  • 18" Swing
  • RPM- 0-3200
  • 220V 1 PH
  •  2 HP
$5,301.29
$4,315.00
  • Banjo uses non-marring, positive locking wedge system to securely hold tool post
  • Convenient leg-mounted tool holder
  • Conveniently located digital readout
  • E-drive Inverter features a built in EMI filter
  • Extended spindle nose houses dual headstock spindle bearings
$4,177.13
$3,409.00
  • 36 integrated indexing positions
  • Banjo uses non-marring, positive locking wedge system to securely hold tool post
  • E-drive Inverter features a built in EMI filter
  • Extended spindle nose houses dual headstock spindle bearings
  • Improved tailstock quill locking mechanism incorporates an anti-rotation key
$3,685.70
$2,999.99
  • 15 Amp quad receptacle for easy reach of powered accessories
  • Variable frequency drive allows machine to run on single- or three-phase power
  • Air nozzle with quick connect for clearing dust/chips
  • Brass-tipped knockout bar concentrates the action in the sliding handle; the brass tip will not damage drive centers
  • Includes two 100W task lamps to provide ideal lighting and safety guard.
$10,934.27
$8,899.99
  • 24 integrated indexing positions
  • Acme thread in Tailstock
  • Conveniently located controls and DRO
  • Forward to reverse is a smooth transition
  • Innovative ratchet style belt tension system (patent pending)
$1,228.56
$1,165.00
  • 18" Swing
  • MT2 Spindle
  • 0-3200 RPM
  • 4" Tailstock Travel
$4,263.14
$3,470.00
  • Acme threads on tail stock for smoother operation and longevity
  • Attached tool caddie allows convenient access to centers, wrenches, and accessories
  • Banjo features a non-marring, pinch style clamp for solid tool rest placement
  • Chrome-trimmed hand wheels are ergonomic for a comfortable feel
  • Includes 8 inch tool rest with 1 inch post
$3,317.13
$2,699.99
  • Acme threads on tail stock for smoother operation and longevity
  • Attached tool caddie allows convenient access to centers, wrenches, and accessories
  • Banjo features a non-marring, pinch style clamp for solid tool rest placement
  • Chrome-trimmed hand wheels are ergonomic for a comfortable feel
  • Includes 8 inch tool rest with 1 inch post
$3,808.56
$3,099.99
  • Acme thread in Tailstock
  • CSA Certified
  • Easy-to-read RPM display
  • Improved tailstock quill locking with anti-rotation key
  • Optional extension bed takes the capacity to 60" between centers
$2,272.84
$1,863.00
  • 12" swing over bed
  • 15" between centers
  • 3/4 HP, 110V, single-phase, universal motor
  • Two spindle speed ranges: 500-1800 RPM & 1000-3800 RPM
$1,075.00
$929.99