Knuth

  • Table load capacity: 2,200 lbs.
  • Number of T-slots: 5 positions
  • T-slots, width: 0.7”
  • T-slots, spacing: 3.1”
  • Drilling Capacity: 1"
  • Table Set Up Area: 16" x 22"
  • Throat: 11"
  • Quill Stroke: 8"
  • Workpiece length (max.): 20”
  • Workpiece weight (max.): 22 lbs.
  • Grinding diameter: 7.9”
  • Grinding spindle speed: 2500 rpm
  • Table set up area: 54” x 13”
  • Number of T-slots: 3 positions
  • Table load capacity (max.): 572 lbs.
  • T-slot (width x spacing): 0.55” x 3.15”
  • Throat: 6”
  • Plate thickness (max.): 0.24”
  • Working length: 161”
  • Cutting angle: 0.3 deg – 2 deg
  • Turning diameter over bed: 14”
  • Turning-Ø over support: 9”
  • Gap bridge length: 8”
  • Bed width: 8”
  • Workpiece length (max.): 51”
  • Turning diameter over bed: 25”
  • Turning-Ø over support: 14”
  • Speed range: 24 rpm - 300 rpm
  • Blade width: 0.24” - 0.75”
  • Blade length: 174.41” - 177.95”
  • Cutting capacity (height x throat): 13” x 23”
  • Cutting speed: 1.111.8 fpm
  • Piston Travel per Quick Stroke: 0.1"
  • Total Piston Stroke: 6.3"
  • Pressure Force: 110,000 lbs
  • Flow Rate Work Stroke: 1 gal/min
  • Generator power consumption: 3.5 kVA
  • Roughness: < 0.3 µm Ra
  • Travel X-axis: 9.8”
  • Travel Y-axis: 8”
  • Belt speed: 131 / 295 fpm
  • Cutting capacity 60° round: 4”
  • Cutting capacity 45° round: 6”
  • Cutting capacity 0° round: 9”
  • Drilling depth (max.): 20”
  • Motor rating main drive : 20.1 Hp
  • Drilling capacity : 3.94”
  • Speed range: 8 rpm - 1000 rpm
  • Pressure force: 44 t
  • Return speed: 0.85”/s
  • Hydraulic pressure max.: 3770 psi
  • Y-axis stroke: 10”
  • Table load capacity: 330 lbs.
  • Number of T-slots: 3 positions
  • T-slots, width: 0.6”
  • T-slots, spacing: 3.9”
  • Workpiece length (max.): 79”
  • Turning diameter over bed: 26”
  • Turning-Ø over support: 17”
  • Turning diameter without gap bridge: 35”
  • Workpiece length (max.): 118”
  • Turning diameter over bed: 31”
  • Turning-Ø over support: 22”
  • Turning diameter without gap bridge: 41”
  • Workpiece length (max.): 118”
  • Workpiece weight (max.): 13,200 lbs.
  • Turning diameter over bed: 63”
  • Turning-Ø over support: 50”
  • Center height: 8”
  • Turning diameter over bed: 15”
  • Turning-Ø over support: 10”
  • Gap bridge length: 10”
  • Center height: 9”
  • Turning-Ø over support: 9”
  • Gap bridge length: 6”
  • Bed width: 12”
  • Cutting speed: 148 / 295 fpm
  • Motor rating main drive: 1.5 Hp
  • Supply voltage: 400 V
  • Cutting Capacities: 0°, 45°, 60°
  • Cutting speed: 98, 164, 246, 295 fpm
  • Motor rating hydraulic pump: 1 Hp
  • Motor rating coolant pump: 0.1 Hp
  • Blade dimensions: 164.57” x 1.34” x 0.04”
  • Workpiece weight (max.): 1,100 lbs.
  • Table dimensions: 24” x 17”
  • Workpiece, length x width x thickness (max.): 38” x 22” x 12”
  • Dielectric, tank capacity: 48 gal
  • Table load capacity: 660 lbs.
  • Number of T-slots: 3 positions
  • T-slots, width: 0.7”
  • T-slots, spacing: 3.1”
  • Plate thickness (max.): 0.24”
  • Working length: 83”
  • Max. plate thickness for bending: 0.16”
  • Upper roll diameter: 6”