Ritter Machinery

  • 4’ x 8’ Face Frame Table
  • Clamp Arm with (3) Hold Down Cylinders
  • (4) Universal Clamping Cylinders and Manifold
  • 45 Degree Vertical Easel
  • 5’ x 8′ Face Frame Table
  • 1″ Thick Formica Surfaced Table
  • 3″ I-Beam Easel Frame Hold Down Beam
  • With (3) Adjustable Hold Down Cylinders
  • Wired 3-Phase 480 Volt, 60 Hz.
  • 3 HP Spindle Drive Motor, TEFC
  • 60″ Back Fence With (4) Stops
  • 12″ Throat Depth
  • 6’ x 12’ Assembly Easel
  • 17 Degree Easel Angle
  • (10) Clamp Cylinders
  • (4) Material Hold Down Dogs
  • 1-1/2 HP Abrasive Belt Drive Motor, TEFC
  • 4″ X 132″ Abrasive Belt Size
  • (2) 4″ X 49″ Ground Steel Platens
  • Wired 1-Phase 240 Volt, 60 Hz.
  • Open Back For 60″ Plus Frame Height
  • 5’ x 12′ Face Frame Table
  • 3″ I-Beam Easel Frame
  • Hold Down Beam with (5) Adjustable Hold Down Cylinders
  • Wired 3-Phase 460 Volt, 60 Hz
  • 7.5 HP Abrasive Belt Drive Motor, TEFC
  • 1 HP Oscillating Dive Motor
  • 8″ X 144″ Abrasive Belt Size
  • Wired 3-Phase 220 Volt, 60 Hz.
  • 1.25″-11″ Adjustable Spindle Centers
  • 0-3″ Adjustable Boring Depth
  • 0-2″ Spindle Height Adjustment
  • 3′ X 6′ Vertical Assembly Easel
  • 40 Degree Easel Angle
  • (4) Universal Clamping Cylinders & Manifold
  • Manifold with 1/4″ NPT Regulator/Gauge
  • Wired 3-Phase 440 Volt, 60 Hz.
  • 2″-11″ Adjustable Spindle Centers
  • 0-3″ Adjustable Boring Depth
  • 0-2″ Spindle Height Adjustment
  • 1-1/2 HP Abrasive Belt Drive Motor, TEFC
  • 4″ X 132″ Abrasive Belt Size
  • (2) 4″ X 49″ Ground Steel Platens
  • Wired 3-Phase 240 Volt, 60 Hz.
  • 1.26” Spindle Centers on Gear Head
  • 0-2″ Adjustable Boring Depth Turret
  • 0.50″ – 0.75″ Thick Drawer Box Sides
  • 14″ Maximum Drawer Box Height
  • Manual Controls, 1-Phase, 110 V, 60 Hz
  • 1.5 HP Spindle Drive Motor, TEFC
  • 14 Degree Single Spindle
  • 6,100 RPM Spindle Speed
  • 6’ x 12′ Face Frame and Door Assembly Table
  • (5) Cylinder Clamp Arm
  • (10) Universal Clamp Cylinders & Manifold
  • (4) Material Hold-down Dogs
  • 4′ X 8′ Vertical Door Clamping Table
  • (6) Universal Clamping Cylinder & Manifold
  • 2″ Cylinder Position Grid Pattern
  • 3″ Bore Clamp Cylinder Housing
  • Wired 3-Phase 240 Volt, 60 Hz.
  • (2) 3 HP Spindle Drive Motors, TEFC
  • 4″-24″ Centers Between Rows
  • 48″ Back Fence with (2) Stops
  • Wired 3-Phase 240 Volt, 60 Hz.
  • 10 HP Abrasive Belt Drive Motor, TEFC
  • 1 HP Oscillating Drive Motor
  • 14″ X 144″ Abrasive Belt Size
  • Router: 24,500 RPM, 11 A, 1.75 HP
  • Drill: 31,000 RPM, 4.5 A, 7/8 HP
  • Electrical: 110V 15A
  • Air: 2 CFM at 80 – 100 PSI
  • 3 HP Abrasive Belt Drive Motor, TEFC
  • 6″ X 132″ Abrasive Belt Size
  • (2) 6″ X 49″ Ground Steel Platens
  • Wired 3-Phase 240 Volt, 60 Hz.
  • Wired 3-Phase 220 Volt, 60 Hz.
  • 2″-11″ Adjustable Spindle Centers
  • 0-3″ Adjustable Boring Depth
  • 0-2″ Spindle Height Adjustment
  • Wired 3-Phase 440 Volt, 60 Hz.
  • 1.25″-11″ Adjustable Spindle Centers
  • 0-3″ Adjustable Boring Depth
  • 0-2″ Spindle Height Adjustment
  • Wired 3-Phase 480 Volt, 60 Hz.
  • 10 HP Abrasive Belt Drive Motor, TEFC
  • 1 HP Oscillating Drive Motor
  • 14″ X 144″ Abrasive Belt Size
  • Wired 3-Phase 240 Volt, 60 Hz.
  • 3 HP Spindle Drive Motor, TEFC
  • 60″ Back Fence With (4) Stops
  • 12″ Throat Depth
  • 1″ Spindle Centers on Gear Head
  • 3/4 HP Spindle Drive Motor, TEFC
  • 0-2″ Adjustable Boring Depth
  • Wired 1-Phase 110 Volt, 60 Hz.