Edge Banders

  • Workable dimensions: 2800 x 570mm
  • Feed speed: 7 m/min (23 ft/min)
  • Min./max. panel height: 12 -50mm (0.5” –1.97”)
  • Thickness of rolled banding: 0.4 -3mm (.016” -0.12”)
  • Work Table Length: 79″
  • Minimum Panel Length: 9.44″
  • Minimum Panel Width: 4 ¾”
  • Panel Thickness (Min – Max): .47″ – 1.77″
  • Dual Motor End Trim
  • Top & Bottom Trim
  • Quick Melt Glue System
  • 3mm Capacity
  • Top & Bottom Trim
  • Pellet Glue System
  • Buffing Unit
  • Fully Automatic Panel Processing
NEW
Maksiwa 110V Single Phase Cabinet Edgebander with Rollers CBC.MR at Elite Metal Tools
  • Glue: Granulated Hot-Melt
  • Tape Thickness: 0.3 mm – 2 mm
  • Max. Tape Width: 3”
  • Feeder Speed: 0 to 26 ft/min
  • Motor: 1PH
  • Tape Thickness: 0,3 (0,01″) to 2 (0,07″) mm
  • Max. Tape Width: 80 mm (3″)
  • Power: 1,300W
  • Panel thickness 14mm – 80mm
  • Exhaust hoods (x2) 80mm
  • Installed motor power 1.5 kW
  • Variable cutters speed 9,000 – 15,000 rpm
  • Comes with Edgebander and Table
  • Tape thickness: 0.3 mm to 2 mm
  • Max. tape width: 3"
  • Feeder speed:  20 ft/min
  • Feeding speed: 23 FPM (7 m/min.)
  • Panel thickness: 0.315~1.77” (8~45 mm)
  • Edge thickness: 0.0158”~0.118”  (0.4 ~ 3 mm)
  • Power: 5 HP Single Phase
  • Feeding speed: 23 FPM (7 m/min.)
  • Panel thickness: 0.315~1.77” (8~45 mm)
  • Edge thickness: 0.0158”~0.118”  (0.4 ~ 3 mm)
  • Power: 5 HP Three Phase
  • Feeding speed: 29.5 FPM (9 m/min.)
  • Panel thickness: 0.315~1.77” (8~45 mm)
  • Edge thickness: 0.0158”~0.118” (0.4 ~ 3 mm)
  • Power: 7.4 HP Single Phase 230V
  • Feeding speed: 29.5 FPM (9 m/min.)
  • Panel thickness: 0.315~1.77” (8~45 mm)
  • Edge thickness: 0.0158”~0.118” (0.4 ~ 3 mm)
  • Power: 7.4 HP Three Phase 230V
  • Feeding speed: 23 FPM (7 m/min.)
  • Panel thickness: 0.472~1.77” (12~45 mm)
  • Edge thickness: 0.0158”~0.118”  (0.4 ~ 3 mm)
  • Working table height: 33.7” (856mm)
  • Feeding speed: 23 FPM (7 m/min.)
  • Panel thickness: 0.472~1.77” (12~45 mm)
  • Edge thickness: 0.0158”~0.118”  (0.4 ~ 3 mm)
  • Working table height: 33.7” (856mm)
  • Feeding speed: 29.5 FPM
  • Panel thickness: 0.315″~1.77″
  • Edge thickness: 0.0158″~0.118″
  • Working table height: 33.47″
  • Panel thickness: 0.315”~1.77” (8~45 mm)
  • Edge thickness: 0.0158”~0.118” (0.4 ~ 3 mm)
  • Working table height: 38” (960 mm)
  • Power: 10.9 HP 230V Three Phase
  • Tape Thickness: (0.4 – 3 mm)
  • Width of Tape: (10 – 65 mm)
  • Feeding Speed: 0.1 ~ 6 M/mm
  • Glue Pot Capacity: 400 ml
NEW
SCM Group Minimax 230V Single Phase Automatic Glue Pot Edgebander with Radius & Premill Feature ME 35ET at Elite Metal Tools
  • Worktable Height: 35.5”
  • Min. – Max. Panel Height: 0.315” – 1.96”
  • Min. Panel Length/Width with Rolled Edges: 7.48”/4.33”
  • Min. Panel Length Cut Only on the Front: 4.72”
  • Min. to max. panel height: 0.315” – 1.96”
  • Min. panel length/width with rolled edges: 4.72”/4.33”
  • Feed speed: 23 fpm
  • Feed motor power: 0.73 Hp
NEW
SCM Group 230V Three Phase Interchangeable Glue Pot Edgebander ME 40ET at Elite Metal Tools
  • Min. – max. panel height: 0.315” – 1.96”
  • Min panel length/width: 7.48”/4.33”
  • Feed motor power: 0.73 Hp
  • Feed speed: 29.5 fpm
  • Min. – max. panel height: 0.315” – 1.96”
  • Min panel length/width: 7.48”/4.33”
  • Feed motor power: 0.73 Hp
  • Feed speed: 29.5 fpm
NEW
SCM Group Minimax 9HP Three Phase Two Feed Manual Contour Edgebander E 20 at Elite Metal Tools
  • Min. ÷ max. edge thickness: 0.016” ÷ 0.12”
  • Min. ÷ max. edge height: 0.39” x 3.3”
  • Min. ÷ max. panel height: 0.31” ÷ 3.15”
  • Min. panels length/width: 11.4/1.97”
  • Panel Thickness: 0.472 -1.77”
  • Edge Thickness: 0.0158”-0.118”
  • Feeding Speed: 23 FPM (7 m/min.)
  • Feed Motor: 1 HP