Press Brakes

  • Table Size 63" x 7"
  • Programming 40 Programs/ 25 Steps per Program
  • Back Gauge Length 21.5"
  • Return Speed 3.3" / sec.

  • 2-Axis CNC Control
  • Repetitive Accuracy Is Within +- .004 MM
  • Fiessler Light Curtain
  • Rexroth Hydraulic Compenents Throughout

  • Easy handling: The machine is sent completely assembled, it is only necessary to connect it to the required power supply and start performing.
  • Versatility: Nargesa PP200 has a catalog with a great deal of optional tooling. (See optional tooling and sample video below)
  • Easy fabrication of tooling: The customer himself or any toolmaker can manufacture dies and  punches.
  • Folding operation with no risk of damaging the punches and dies with thick materials unlike conventional press brakes.

  • Working Pressure: 22 Tons
  • Distance Between Housings: 40.1"
  • Throat Depth: 7.8"
  • Open Height: 9.64"

  • Neck: 7.28"
  • Motor power: 4 KW / 6 HP.
  • Three phase power: 230V or 480V
  • Hydraulic Power: 40 Tons

  • American Made Motors
  • Nema Electrics
  • Two Speed Ram
  • Bottom Time Delay

  • Length of Working Table: 157.4"
  • Distance Between Housings: 124"
  • Throat Depth: 12.5"
  • Rapid Ram Travel Speed: 2.4" / Sec.

  • 90 Degree Top Punch and 3/4 Inch Bottom Vee Die Included
  • 30 Strokes Per Minute
  • American Made
  • Operates From 10-110 PSI ( 90 PSI Gives Rated Tonnage )

  • Controller Holds 100 Programs With Up To 25 Commands
  • 13 Feet Of Useful Beam
  • 123 Tons Of Hydraulic Power
  • Included Is One Set Of Multi-Vee Tooling, Six Sensor Safety Curtain, Delem Touch Screen Controls, Auto Crowning Compensation and Much More

  • Electric Back Gauge With Manual Micrometer Adjustment Standard
  • Extra-Wide Guideways For Exceptional Rigidity
  • Adjustable 2-Step Downward Travel For Higher Productivity
  • Oversized Hydraulic Tank With High-Performance Pump

  • Nema Electrics
  • Three Speed
  • Depth Stop w/Digital Readout
  • American Made Motors

  • Forming/ Punching 200/135
  • Bed Length 20'
  • Bet Hsgs. 18'-5"
  • Open Ht 14"

  • Working Pressure: 125 Tons
  • Distance Between Housings: 124"
  • Open Height: 15.9"
  • Backgauge Travel: 24"

  • Working Pressure: 44 Tons
  • Throat Depth: 7.8"
  • Length of Working Table: 78.7"
  • Open Height: 12.5"

  • Available In Both 10' and 13' Tables
  • Puts Out 179 Tons Of Force
  • Multi-Vee Botton Die and Gooseneck Punch Come Standard
  • Great For Doing Multiple Bends Over The Entire Length Of The Press Brake

  • Working Pressure: 22 Tons
  • Distance Between Housings: 40.1"
  • Throat Depth: 7.8"
  • Open Height: 9.64"

  • 31" Width
  • 1/4" Mild Steel Capacity
  • Multi Vee Bottom Die
  • DRO For Back Gauge And Down Position

  • 50 Ton of Pressure
  • 78" Bed Length
  • 2-Axis CNC System
  • 4HP Main Motor

  • 224 Tons Of Bending Pressure
  • Available In 10' Or 13' Tables
  • Accuracy Of + - .01mm
  • Comes Standard With A Multi-Vee Bottom Die And Gooseneck Punch

  • Ram Travel: 7.8"
  • Throat Depth: 15.7"
  • Distance Between Housings: 124"
  • Backgauge Travel: 24"

  • Maximum working width: 42"
  • Maximum clamping beam lift: 4-3/4"
  • Maximum height of pan/box sides: 1-1/2"
  • Maximum bending angle: 0-140°


 


  • Electric Back Gauge With Manual Micrometer Adjustment Standard
  • Extra-Wide Guideways For Exceptional Rigidity
  • Adjustable 2-Step Downward Travel For Higher Productivity
  • Oversize Hydraulic Tank With High-Performance Pump Smooths And Stabilizes Oil Flow

  • Forming/ Punching 150/100
  • Bed Length 14'
  • Bet Hsgs. 12'-5"
  • Open Ht 13"

  • Two Speed Ram
  • Bottom Time Delay
  • American Made Motors
  • Clamp Type Backgauge-Manual Adjustable X,Y, & Z