Multi Function Wood Machines

  • Three independent 2.5Hp motors – 230V
  • Blade size 10” diameter with ⅝” arbor
  • Swiss-made Tersa cutterhead in jointer/planer
  • Spindle working length 3”
  • Three Independent 2.5 HP Motors - 230v / 1 ph
  • Table Saw Blade Size: 10" Diameter with 5/8" Arbor
  • Jointer Width of Cutterhead: 10"
  • Shaper Spindle Working Length: 3"
  • Jointer Working Width: 12"
  • Planer Maximum Working Thickness: 9"
  • Table Saw Rip Capacity: 32"
  • 3/4" Dado Capacity
  • Maximum blade diameter w/ scoring blade in place 12.4” (315mm)
  • Scoring blade diameter 100mm X 20mm
  • Maximum depth of cut 3.75”
  • Blade Speed Main (Scoring) RPM 4000 (8000)
  • Planer Max Stock Removal: 0.125"
  • Jointer Table Length: 78.5"
  • Table Saw Max Cut Depth: 3.75"
  • Shaper Spindle Diameter: 1.25"
  • Jointer Max Depth of Cut: 0.1875"
  • Planer Max Stock Removal: 0.125"
  • Table Saw Blade Diameter: 14"
  • 230v / 3 ph motors

 

  • Maximum depth of cut: 0.1875”
  • Maximum stock removal: 0.125”
  • Electrical: 230 volts, 3-Phase
  • Xylent Cutterhead
  • Fence Adjustment
  • Depth Gauge
  • Pocket Depth Adjustment
  • Easy Access Tooling
  • Maximum board width: 24"
  • Maximum board thickness: 6"
  • Sanding belt size: 25" x 60"
  • Motor: 15 HP, 220V/440V, 3-phase
  • Designed for mass shaping and sanding production
  • Shaper head can be moved up & down, forward & backward
  • Sanding head can be tilted for different angular setup
  • Comes with: 1 Cutter and 2 Sand Wheels
  • Designed for mass shaping and sanding production
  • Shaper head can be moved up & down, forward & backward
  • Sanding head can be tilted for different angular setup
  • Comes with: 2 Cutter and 4 Sand Wheels
  • Designed for mass shaping and sanding production
  • Shaper head can be moved up & down, forward & backward
  • Sanding head can be tilted for different angular setup
  • Comes with: 2 Cutter and 3 Sand Wheels
  • Spindle Motor: 5 amp/18,000 RPM, 3/8" (ER20) Collet
  • Air Drill: .7 Hp, /25,000 RPM, 1/4" /Collet
  • Vacuum Requirement: 220 CFM, 3" Hose Connection
  • Air Requirement: 30 CFM at 80 PSI
  • Designed for mass shaping and sanding production
  • Shaper head can be moved up & down, forward & backward
  • Sanding head can be tilted for different angular setup
  • Comes with: 2 Cutter and 2 Sand Wheels