Quantum Machinery Group

  • Propane gas supply.
  • Combustion chamber isolated by ceramic fiber and refractory brick.
  • Removable back door to heat up steel bars in the middle.
  • Maximum capacity Ø 80mm.
  • Maximum vice opening: 180mm (7")
  • The NTS 370 can run at 2 different speeds: 25-50 R.P.M.
  • Square Tube Cutting at 90° (Straight Cut) - 4.50"
  • Square Tube Cutting at 45° - 3.75"
  • Maximum Vice Opening: 185mm (7.25")
  • The NTA 370 is to be equipped with a 370mm (14.5") Blade.
  • NTA 370 can run at 2 different speeds: 25-50 R.P.M. (Unless Equipped with Variable Speed Inverter)
  • Electrical: The NTA 370 can be brought in at either 220 Volt / 3 Phase / 60Hz or 480 Volt / 3 Phase / 60Hz.
  • Appropriately dimensioned flywheels.
  • Strong band guides with tight stress-raiser bearings and adjustable widia tips.
  • Band stretching is obtained by elector-mechanical blade tensioner with microswitch.
  • Vice with a device for quick approach
  • Maximum vice opening: 160mm (6.3")
  • The NTS 315 can run at 2 different speeds: 33-66 R.P.M.
  • Square Tube Cutting at 90° (Straight Cut) - 3.50"
  • Square Tube Cutting at 45° Right - 3.50"
  • Pipe Max Outer Diameter: 48mm
  • Max Torque: 2400N/m
  • Diameter using FE – 42 daN/mq: 48x3.5mm
  • Diameter using FE – 35 daN/mq: 48×4mm
  • Overall Tabletop Size: 4' x 8' (48" x 96")
  • Borehole Diameter: Ø 28mm (1-1/10")
  • Welding Table Material Thickness: Approx. 15/16" to 1-1/16"
  • Maximum Weight Load: 24,210 lbs. (Based on Even Distribution)
  • Vertical rotation on bolt with adjustable tapered bearings without backlash.
  • High-capacity band control by two-speed motor and special reducer with bronze gear and tempered and ground worm screw
  • Appropriately dimensioned flywheels.
  • Strong band guides with tight stress-raiser bearings and adjustable widia tips
  • Overall Tabletop Size: 4000x2000x100mm (157.48" x 78.74" x 3.93")
  • Borehole: Ø 16mm (0.629")
  • Welding Table Material Thickness: Approx. 11.5 – 13mm (0.45" - 0.51")
  • Maximum Weight Load: 5,960 lbs. (Based on Even Distribution)
  • Maximum vice opening: 7"
  • Square Tube Cutting at 90 Degrees - 4.25"
  • Square Tube Cutting at 45 Degrees - 3.75"
  • Rectangular Tube Cutting at 90 Degrees - 7.0"W x 3.75"H
  • Overall Tabletop Size: 3000x1500x200mm (118" x 59" x 7.87")
  • Borehole: Ø 28mm (1.10")
  • Welding Table Material Thickness: Approx. 24.5 – 27mm (0.96" - 1.06")
  • Maximum Weight Load: 9,880 lbs. (Based on Even Distribution)

 

  • Maximum vice opening: 185mm (7.25")
  • The NTM 350-S can run at 2 different speeds: 33-66 R.P.M.
  • Square Tube Cutting at 90° (Straight Cut) - 3.75"
  • Square Tube Cutting at 45° Right - 3.50"
  • Overall Tabletop Size: 3' x 4' (36" x 48")
  • Borehole Diameter: Ø 16mm (5/8")
  • Welding Table Material Thickness: Approx. 7/16" to 1/2"
  • Maximum Weight Load: 8,314 lbs. (Based on Even Distribution)
  • Maximum vice opening: 100mm (3.9")
  • The NEW 250 DV is to be equipped with a 250mm blade.
  • The NEW 250 DV can run at 2 different speeds: 40-80 R.P.M.
  • Solid Round Cutting at 90 Degrees - 1.50"
  • Pipe Max Outer Diameter: 114.3mm
  • Max Torque: 22,000N/m
  • Diameter using FE – 42 daN/mq: 101.6x5.74mm
  • Diameter using FE – 35 daN/mq: 114.3×4.78mm
  • Overall Tabletop Size: 4' x 5' (48" x 60")
  • Borehole Diameter: Ø 28mm (1-1/10")
  • Welding Table Material Thickness: Approx. 15/16" to 1-1/16"
  • Maximum Weight Load: 16,150 lbs. (Based on Even Distribution)
  • Overall Tabletop Size: 1000x1000x100mm (39.37" x 39.37" x 3.93")
  • Borehole: Ø 16mm (0.629")
  • Welding Table Material Thickness: Approx. 11.5 – 13mm (0.45" - 0.51")
  • Maximum Weight Load: 3,985 lbs. (Based on Even Distribution)
  • Overall Tabletop Size: 1200x800x100mm (47.24" x 31.5" x 3.93")
  • Borehole: Ø 16mm (0.629")
  • Welding Table Material Thickness: Approx. 11.5 – 13mm (0.45" - 0.51")
  • Maximum Weight Load: 3,985 lbs. (Based on Even Distribution)
  • Pipe Max Outer Diameter: 60mm
  • Max Torque: 9,100N/m
  • Diameter using FE – 42 daN/mq: 60.3x5.54mm
  • Diameter using AISI 304/316 – 65 kg/mq: 60.3x4mm
  • Working method by twisting and flexion in COLD.
  • Machine suitable for small and medium production.
  • Safe and reliable transmission by a motor reducer with flat treated pinions, achieving a remarkable performance and least maintenance.
  • Perfect for making all kinds of ornamental standard parts and essential to make our own designs, a lot more demanded in the market. The pieces requested by architects, technicians and final customers, make it a very important tooling in a blacksmith workshop.
  • Overall Tabletop Size: 5' x 10' (60" x 120")
  • Borehole Diameter: Ø 16mm (5/8")
  • Welding Table Material Thickness: Approx. 7/16" to 1/2"
  • Maximum Weight Load: 11,475 lbs. (Based on Even Distribution)
  • Pipe Max Outer Diameter: 60mm
  • Max Torque: 5500N/m
  • Diameter using FE – 42 daN/mq: 60x4mm
  • Diameter using FE – 35 daN/mq: 64x5mm
  • Overall Tabletop Size: 1500x1500x200mm (59" x 59" x 7.87")
  • Borehole: Ø 28mm (1.10")
  • Welding Table Material Thickness: Approx. 24.5 – 27mm (0.96" - 1.06")
  • Maximum Weight Load: 7,055 lbs. (Based on Even Distribution)

 

  • Overall Tabletop Size: 1500x1000x200mm (59" x 39.37" x 7.87")
  • Borehole: Ø 28mm (1.10")
  • Welding Table Material Thickness: Approx. 24.5 – 27mm (0.96" - 1.06")
  • Maximum Weight Load: 7,520 lbs. (Based on Even Distribution)