Clausing Industrial

  • Equipped with hydraulic separate clamping unit. Vertical movement of arm is coordinated by an IC timer. With a single touch on push button switch, you can have the arm unclamped then move vertically, or stop then clamp automatically. Very easy to operate, and tools will always stay at the same point after tool shifting
  • Powerful 5 Hp, 2-speed, heavy-duty spindle drive motor
  • Special automatic tool eject device is supplied to allow you to change tools quickly. (No drifter is required) Special arm elevating device is provided to prevent arm from falling down abruptly after years of usage
  • CSA Electrics Standard
  • Drilling capacity in steel: 1" (25mm) maximum
  • Drilling capacity in cast iron: 1.18" (30mm) maximum
  • Depth scale and adjustable depth stop
  • Drill guard with microswitch
$7,375.00
$7,195.00
  • 2 head drill press
  • Mounted to a fixed or oversized table offer greater ease in positioning the workpiece and the flexibility to handle bulky or heavy workpieces.
  • Each drill head on a multiple head drill can be equipped differently to perform the operation required by that head such as... automatic drilling cycle, automatic tapping or any of the equipment offered.
  • Drilling machines can be set-up with rotating heads adding flexibility
$22,415.00
$21,095.00
  • Enclosed Worm Gear Drive for Trouble-free Operation
  • Head Rotates 45 Degrees Left and Right of Center
  • Flood Coolant System
  • Two (2) Year Limited Warranty
  • Drilling capacity in steel: 1" (25mm) maximum
  • Drilling capacity in cast iron: 1.18" (30mm) maximum
  • Depth scale and adjustable depth stop
  • High/low speed range selector
$8,230.00
$7,895.00
  • Magnetic Starter with 110v Control Circuit and Overload Protection
  • Fixed Table Models 26-3/4" (680mm) x 29" (736mm) Heavy-duty Cast Iron Table with two-way tilt (15°L & 45°R)
  • Blade Speed Indicator
  • Two (2) year limited warranty
  • Powerful 2 Hp spindle drive motor for heavy-duty cutting
  • Special spindle balance mechanism, superior to traditional balance mechanism and extends Balance Spring life
  • Coolant system
  • Low volt and overload protection
  • Tapping capacity in steel: .71" (18mm) maximum
  • Tapping capacity in cast iron: .87" (22mm) maximum
  • “EVRS" models are equipped with electronic variable speed and automatic feed reversing system for tapping
  • Automatic tool ejector
$8,655.00
$8,275.00
  • 5 Hp 230/460v 3 ph drive motor
  • Infinitely variable blade speeds
  • LED blade speed readout
  • Vise clamps work piece both sides of blade
$18,585.00
$17,995.00
  • Mounted to a fixed or oversized table offer greater ease in positioning the workpiece and the flexibility to handle bulky or heavy workpieces.
  • Each drill head on a multiple head drill can be equipped differently to perform the operation required by that head such as... automatic drilling cycle, automatic tapping or any of the equipment offered.
  • Drilling machines can be set-up with rotating heads adding flexibility
  • 3 head drill press
  • 2HP spindle drive motor for heavy duty cutting
  • High speed gears are made of nickel-chrome steel and are heat treated and ground for durability
  • Coolant system
  • Low volt & overload protection
  • Drilling capacity in steel: 1" (25mm) maximum
  • Drilling capacity in cast iron: 1.18" (30mm) maximum
  • “EV" models are equipped with electronic variable speed
  • Automatic tool ejector
$9,285.00
$8,895.00
  • Tapping capacity in steel: .71" (18mm) maximum
  • Tapping capacity in cast iron: .87" (22mm) maximum
  • “EVRS" models are equipped with electronic variable speed and automatic feed reversing system for tapping
  • Automatic tool ejector
$9,595.00
$9,195.00
  • Drilling capacity in steel: 1" (25mm) maximum
  • Drilling capacity in cast iron: 1.18" (30mm) maximum
  • Depth scale and adjustable depth stop
  • High/low speed range selector
$8,435.00
$8,095.00
  • Drilling capacity in steel: 1" (25mm) maximum
  • Drilling capacity in cast iron: 1.18" (30mm) maximum
  • Depth scale and adjustable depth stop
  • Drill guard with microswitch
$8,835.00
$8,549.00
  • High-quality cast-iron arm with heat-treated and ground slides for smooth and accurate head positioning
  • The bearing bracket for gear-box is fitted with standard bearings to fit arm slide for smooth gear-box operation
  • Equipped withhydraulic clamping. With a push of a button you can have arm unclamped then move vertically, or stop then clamp automatically
  • CSA Electrics Standard
  • 200-1300 RPM 
  • Greater capacity, too, with Clausing LOW/HIGH, production rated 1-1/8" in cast iron, 7/8" in steel with optional power feed
  • Precision ground 22" x 19" oil trough table, handles large parts and fixtures.
  • Three V-belts and a cog belt transmit positive power to the spindle
  • Powerful 3 HP spindle drive motor for heavy duty cutting
  • High speed gears
  • Low volt and overload protection
  • Tool kit & manuals
  • 3 head drill press
  • Mounted to a fixed or oversized table offer greater ease in positioning the workpiece and the flexibility to handle bulky or heavy workpieces.
  • Each drill head on a multiple head drill can be equipped differently to perform the operation required by that head such as... automatic drilling cycle, automatic tapping or any of the equipment offered.
  • Drilling machines can be set-up with rotating heads adding flexibility
$30,335.00
$28,995.00
  • Specify 230 Volt or 460 Volt
  • Drill to center of circle 20"  dia.
  • Spindle travel 6.5"
  • Variable and spindle pulleys are cast iron, fully machined and balanced
  • Automatic kerf loss compensation & computer controlled multiple indexing
  • Smart NC-100 technology programmable up to 100 different jobs
  • Automatic height setting feature
  • Two (2) year limited warranty
  • Magnetic Starter with 110v Control Circuit and Overload Protection
  • Fixed Table Models 26-3/4" (680mm) x 29" (736mm) Heavy-duty Cast Iron Table with two-way tilt (15°L & 45°R)
  • 3/4" (19mm) Carbon Hardback Blade
  • Two (2) year limited warranty
  • Mounted to a fixed or oversized table offer greater ease in positioning the workpiece and the flexibility to handle bulky or heavy workpieces.
  • Each drill head on a multiple head drill can be equipped differently to perform the operation required by that head such as... automatic drilling cycle, automatic tapping or any of the equipment offered.
  • Drilling machines can be set-up with rotating heads adding flexibility
  • 2 head drill press
  • Magnetic Starter with 110v Control Circuit and Overload Protection
  • Hydraulic Table Models 26-3/4" (680mm) x 29" (736mm) Heavy-duty Cast Iron Table with two-way tilt (15°L & 45°R) Four (4) T-Slots on Top Table Travel 13"
  • Blade Tension Indicator
  • Two (2) year limited warranty