Revolution Machine Tools

  • Maximum Diameter: 157”
  • Minimum Diameter: 17”
  • Max. Flanging Radius: 1.38”
  • Electric Supply: 230V, 3-Phase
  • Cutting Speeds: 114- 229 ft/min
  • Band Dims.: 107.5" x 1" x 0.035"
  • Main Motor: 1.75 HP
  • Capacity: 0°, 45°, 60°, -45°
  • Shaft Diameter: 2.36”
  • Roll Diameters: 8.46”
  • Turning Speed: 13 FPM
  • Max Section Modulus: 0.061 in3
  • 7 Axis CNC
  • Bending Force: 250 Tons
  • Bending Length: 148"
  • Length of Ram Stroke: 11”
  • Cutting Speeds: 49-394 ft/min
  • Band Dims.: 226" x 1.6"
  • Chip Conveyer Motor: 0.34 HP
  • Servo Motor: 2 HP
  • Bending Length: 61”
  • Top Roll: 5.91”
  • Bottom Roll: 5.91”
  • Side Rolls: 5.12”
  • Maximum Saw Blade Size Ø: 12”
  • Nominal Current: 5.58 A
  • Power: 3 HP
  • Motor Power:2.4 – 3 HP
  • Bending Force: 440 Tons
  • Bending Length: 168”
  • Distance Between Frames: 149”
  • Length of Ram Stroke: 15”
  • Roll Diameters: 9.64”
  • Motor power: 5.5 HP
  • Max Section Modulus: 0.97in3
  • Turning Speed: 19 FPM
  • Cutting Speeds: 114- 229 ft/min
  • Band Dims.: 8' 11" x 1" x 0.035”
  • Main Motor: 1.75 HP
  • Capacity: 0°, 45°, 60°, -45°
  • Maximum Saw Blade Size Ø: 10"
  • Nominal Current: 4.7 A
  • Power: 2.5 HP
  • Motor Power: 1.75 – 2.5 HP
  • Cutting Speeds: 65- 328 ft/min
  • Band Dims.: 124" x 1" x 0.035”
  • Main Motor: 2 HP
  • Capacity: 0°, 45°, 60°, -45°
  • Max Pressure at 200 Bar: 44 Ton
  • Oil Tank Capacity: 10 Gal
  • Max Stroke: 11.25"
  • Bolt Diameter: 3"
  • Bending Length: 102”
  • Distance Between Frames: 87”
  • Length of RAM Stroke: 11”
  • Daylight: 20.9”
  • Bending Force: 150 Tons
  • Bending Length: 122”
  • Distance Between Frames: 102”
  • Length of Ram Stroke: 11”
  • Cutting Speeds: 65- 328 ft/min
  • Band Dims.: 236.2 x 1.61 x 0.051”
  • Main Motor: 7.5 HP
  • Capacity: 0°, 30°, 45°, 60°
  • Number of shafts: 3 pieces
  • Shafts diameter (same on all three): Ø5.51”
  • Rolls diameter: Ø12.40” – Ø15.35” – Ø16.14”
  • Bending speed: 5- 27 FPM
  • Max. Cutting Length: 121”
  • Cutting Capacity (Mild Steel): 10Ga
  • Cutting Capacity (Stainless Steel): 12Ga
  • Strokes per Minute: 41
  • Machine Capacity OD: 2”-14”
  • Wall Thickness Capacity: Up to 2.5” (One Setup)
  • Spindle RPMs Max: 400 RPM
  • Facing Head Diameter: 20”
  • Machine Capacity OD: 1”-8”
  • Facing Head Diameter: 10”
  • Spindle RPMs Max: 100-900 RPM
  • X Axis Stroke: 1.57”
  • Clear Front: 47”
  • Clear Side: 16”
  • Stroke: 16”
  • Daylight: 35.4”
  • Machine Capacity OD: 1” – 8”
  • Wall Thickness Capacity (one setup): 0.28”
  • Spindle RPMs Max.: 400 RPM
  • X Axis Stroke: Manual adjustment across facing head