Laguna Tools

  • Machine Power: 220V / Single or 3 Phase options
  • Table size: 5’ x 10’
  • 12” clearance under the gantry
  • 6-zone Phenolic Grid Style Vacuum Table
  • Machine Power: 220V / Single or 3 Phase options
  • Table size: 4’ x 8’
  • 12” clearance under the gantry
  • 6-zone Phenolic Grid Style Vacuum Table
  • Work Table Length: 79″
  • Minimum Panel Length: 9.44″
  • Minimum Panel Width: 4 ¾”
  • Panel Thickness (Min – Max): .47″ – 1.77″
  • 1Ph 220v /30 amp
  • 6,000 – 24,000 RPM Spindle
  • Gantry Height: 7.5 inches
  • Useable Table: 48″ x 48″
  • 6-Zone Vacuum Table to hold down parts
  •  Three phase router 220v /30 amp (single phase options available)
  •  Gantry Height: 7.5 inches
  •  Useable Table: 48″ x 96″
  • Single phase router 220v /30 amp
  • 6,000 – 24,000 RPM Spindle
  • Gantry Height: 7.5 inches
  • Useable Table: 48″ x 96″
  • Dual Motor End Trim
  • Top & Bottom Trim
  • Quick Melt Glue System
  • 3mm Capacity
  • Sanding belt size: 37" X 60"
  • Max sanding height: 5.9"
  • Adjustable sanding platen: 3"
  • 220V / 1phase
  • Reci Laser Tube 150W
  • Table Dimensions: 36″ x 51″
  • WIFI Enabled
  • Lift Table up to 7″
  • Reci Laser Tube 100W
  • Table Dimensions 36″ x 24″
  • WiFi Enabled
  • Lift Table: Up to 7″
  • Motor: 220v / 3ph
  • Distance Between Centers: 36"
  • Swing Over Bed: 24"
  • RPM: High: 135-3500 Low: 50-1300
  • Main Motor: 20HP
  • Variable Feed Speed: 1HP
  • Max Sanding Height: 6"
  • Max Sanding Width: 36.5"
  • Table size: 4' x 4"
  • Motor: 12 HP
  • 12” clearance under gantry.
  • Vacuum table with T-slots.
  • 63″ Dumbbell Sliding Table Design
  • 5 HP Single Phase Main Motor
  • European-style 51″ rip fence
  • ¾ HP Scoring Motor
  • 1Ph 220v /30 amp
  • 6,000 – 24,000 RPM Spindle
  • Gantry Height: 7.5 inches
  • Useable Table: 48″ x 48″
  • Motor: 5HP Leeson continuous duty motor
  • Volt:1 phase, 220 volt
  • Throat: 16-1/2″
  • Blade Length: 158"
  • Motor: 220v 7.5HP 3phase 60hz /20 Amp.
  • Bed Size: 16 x 100"
  • Max. Depth of Cut: 1/8"
  • Cutterhead Diameter: 3-7/8"
  • Bed Size: 16 x 21-1/2"
  • Max. Depth of cut: 1/4"
  • Max. Stock Thickness: 8"
  • Max. Stock Width: 16"
  • Main Motor: 30 HP
  • Variable Feed Speed: 2 HP
  • Max Sanding Height: 6”
  • Max Sanding Width: 51”
  • Maximum Stock Width: 25”
  • Maximum Stock Thickness: 9”
  • Maximum Stock Removal 01-12” Wide: 6 mm/1/4”
  • Cutter-head Speed: 4800 RPM
  • Max sanding width: 36 1/2"
  • Max sanding height: 5.9"
  • Variable feed speed: 1HP
  • 220V / 3 Phase
  • Motor: 2HP, 220 Volt, Single Phase
  • Max. Outboard Swing: 32”
  • Swing over Bed: 18”
  • Distance between Centers: 36”
  • Motor: 1 3/4 HP, TEFC, 60Hz.
  • Quick Release Blade Tensioner w. 6 &11 O'clock stops
  • Throat Capacity: 13 5/8"
  • Miter T-Slot: 3/8" X 3/4"