Shapers

  • Motor size: 3 HP, 220V, single-phase
  • Table working height: 35"
  • Maximum cutter diameter: 6"
  • Table working size: 17" x 32" 13-1/2" (each side)
  • Motor - 1 Phase, 1 HP
  • Spindle Diameter - 12,7 mm (0,5″)
  • Table Dimensions - 610 (24″) x 480 (18,9″) mm
  • Vertical Table Track - 22,5 mm (0,89″)
  • Maximum spindle height above table 5”
  • Maximum tool diameter, profiling & under table 9”
  • Maximum tool diameter, tenoning: 12.375”
  • Sliding table stroke 51.25”
  • Maximum working width (finished section): 240mm (260 option)
  • Maximum working thickness (finished section): 120mm (200 option)
  • Motor power: 5.5 HP (4 kW) (up to 18.5  kw option)
  • Min/Max profiling tool diameter: 100/200mm
  • Digital readout gives the use exact spindle height and allows for .001" adjustments
  • Micro adjust control knobs allow for precision adjustment for the fence
  • Integrated casters can be raised and lowered to mobilize shaper
  • Heavy duty cast iron base
  • Two speed reversible spindle speeds
$4,914.29
$3,999.99
Save $914.3!
  • Digital readout gives the use exact spindle height and allows for .001" adjustments
  • Micro adjust control knobs allow for precision adjustment for the fence
  • Integrated casters can be raised and lowered to mobilize shaper
  • Heavy duty cast iron base
  • Two speed reversible spindle speeds
$4,668.57
$3,799.99
Save $868.58!
  • Motor: 5 HP, 220V, single phase
  • Spindle capacity: 5-1/8" (1-1/4" spindle)
  • Sliding table: 35-1/2" wide x 13-1/4" deep
  • Table travel: 21-7/8"
  • Starting Pins for irregular shaping
  • Forward/reverse switch for left and right hand operation
  • Two-speed step pulley drive lets you select the best speed and torque for different cutter diameters
  • Independent left and right fences feature micro-adjustment and have zero-clearance capability
  • Extra-large handwheel is conveniently located for fast, easy and accurate spindle height adjustments
$2,457.13
$1,980
Save $477.13!
  • Two-speeds let you select the best speed and torque for different cutter diameters
  • Independently adjustable left and right fences, standard with a micro adjust control for precise positioning
  • Large 25” X 25-1/2” precision ground cast iron table provides a durable work area
  • V-belt transfers maximum power to the spindle
  • Extruded aluminum fence comes with T-Slots and 2 feather board hold-downs
$2,702.86
$2,160
Save $542.86!
  • Starting Pins for irregular shaping
  • Forward/reverse switch for left and right hand operation
  • Two reversible spindle speeds lets you select the best speed and torque for different cutter diameters
  • Independent left and right fences feature micro-adjustment and have zero-clearance capability
  • Extra-large handwheel is conveniently located for fast, easy and accurate spindle height adjustments
$1,719.99
$1,411
Save $308.99!
  • Sliding table travels a full 49-1/4 inches
  • Fully adjustable fence has dual digital readout positioning with micrometer adjustments
  • Tilting spindle for additional angles
  • Large table with built-in slider with room for stock feeder
  • Full coverage guard with workpiece hold downs
$12,040
$9,799.99
Save $2,240.01!
  • Table Size: 32” x 26”
  • T-Slot Size: 3/4” x 3/8”
  • Spindle Travel: 4"
  • Table Opening: 6-1/4"
$2,999
$2,499.99
Save $499.01!
  • Motor: 5 HP, 220V, single-phase
  • Table size: 35-1/2" x 28"
  • Spindle travel: 3-1/4"
  • Maximum cutter height: 5-1/8"
  • 1 1/4" MK4 interchangeable spindle
  • Table Dimensions: 47.25" x 32"
  • Max Insert Opening: 12.5"
  • Table Height: 36"
  • Motor Horsepower: 11HP
  • Electrical Requirements: 3-Phase @ 230 volts
  • Dust Extraction: 680 CFM x 2
  • Table Dimensions: 1080 x 760mm (42.5” X 29.9”)
  • 5HP 1 phase 220V 60 HZ
  • Spindle Sizes: 3/4" and 1-1/4"
  • Capacity Under Nut: 6" (for 1-1/4") & 4" (for 3/4")
  • Spindle speeds: 5000 / 7000 / 10000 rpm
  • Motor: 3HP, 1 Phase, 220 Volt 60 Hz
  • Capacity under Nut: 4" (1 ¼" Spindle)
  • Spindle Speeds: 4000, 6000, 8000, 10000 RPM
  • Drive Belt: Flat Poly-Groove
  • Motor: 5 HP, 220V, single-phase
  • Spindle travel: 3-1/4"
  • Maximum cutter diameter: 5-7/8"
  • Sliding table: 35-1/2" wide x 13-1/4" deep
  • Motor - 1 Phase, 3 Phase, 3 HP
  • Spindle Diameter - 30 mm (1,2″)
  • Mobile Table Dimensions - 500 (19,7″) x 320 (12,6″) mm
  • Table Dimensions - 700 (27,6″) x 555 (21,9″) mm
  • Motor: 3 HP, 240V, Single-phase
  • Table with standard wing attached: 30-1/2" x 28-1/4"
  • Spindle travel: 3"
  • Spindle speeds: 7,000 and 10,000 RPM
  • Maximum working width (finished section): 240mm (260 option)
  • Maximum working thickness (finished section): 120mm (200 option)
  • Motor power: 5.5 HP (4 kW) (up to 18.5  kw option)
  • Min/Max profiling tool diameter: 100/200mm
  • Programmable Shaper with HSK Technology
  • Table Dimensions: 47.2" x 28.7"
  • Spindle Speeds: 900 - 12,000 RPM
  • Max. Tool Diameter with Profile Fence: 10"

 

  • Digital readout gives the use exact spindle height and allows for .001" adjustments
  • Micro adjust control knobs allow for precision adjustment for the fence
  • Integrated casters can be raised and lowered to mobilize shaper
  • Heavy duty cast iron base
  • Two speed reversible spindle speeds
$4,914.29
$3,999.99
Save $914.3!
  • Motor: 5 HP, 220V, single-phase
  • Table size: 28" x 35-1/2"
  • Table counterbore: 7" x 5/8" deep
  • Spindle travel: 3-1/4"