BN Products
Category
BN products is headquartered in Wickenburg Arizona, and is a principal supplier of Portable Rebar Benders, Portable Rebar Cutters, Battery Powered Rebar Tiers, and other related equipment. Gus Benner and Rollie Nawman formed a partnership and founded the company in 1925 as a sheet metal fabricator in Oakland, California. Benner-Nawman became a corporation in 1946. In 2010, the Benner-Nawman split into two separate companies. Benner-Nawman, Inc. and BN Products – USA, LLC, which handles all sales on products related to the construction wholesale market. BN Products is passionate about supplying the best product lines, supporting their distribution channels, and providing superior customer service. BN Products represents innovative quality products and marketing concepts that exceed their customer’s expectations while anticipating their needs for tomorrow.
- Maximum Bending Diameter: 1" #8 Rebar Grade 60
- Bending Angle: Up to 94 degrees (1/2") - up to 90 degrees ( 1")
- Interchangeable bending hook covers rebar diameters from #4 to #8 grade 60
- Includes wooden carrying case with hydraulic oil and a tool kit
- Maximum Bending Diameter 7/8" (#7) Rebar (22mm) Grade 60
- Bending Angle / Speed Up to 180 degrees / 6 seconds
- Voltage/Amperage 115V 50/60Hz / 12 amps
- Tool Weight 190 lbs (86 kg)
- Maximum Bending Diameter: 5/8" (#5) Rebar Grade 60
- Bending Angle / Speed: Up to 180 degrees / 5 seconds
- Two preset angle locks for repeating the same angle bend
- Complete with set of (6) bending rollers in a steel carrying case, a tool kit, and a standard foot pedal control
- Max. Cutting: #10 or 1-1/4″ Grade 60
- Max. Bending: #9 or 1-1/8″ Grade 60
- Cutter Power: 115 Volt 50/60 Hz -18 amps
- Bends rebar from 0 -180 degrees
- Rebar Capacity: Grade 60 Up to #6 (3/4")
- Cutting Speed: 3 seconds
- Bending Speed: 180 degree bend in 7 seconds
- Shipped fully assembled and includes a steel case with six bending rollers and a foot pedal control switch
- Power 1800W / 11.7 Amps / 1.9 Hp
- Voltage 120V/60Hz
- Number of Gears 2
- No Load Speed I 180 - 460 rpm
- Compact, lightweight portable saw cuts rebar, all-thread rod, pipe, conduit and more
- Powerful 9 Amp, 1100 Watt, 120V motor operates at 2000 RPM
- Designed to cleanly cut material flush with the surface
- Has 3-position removable side handle and rotating trigger handle to operate saw in concrete forms and other tight locations
- Power (Max) 8000W
- Power (Rated) 7500W
- Frequency 60 Hz
- Starting Type Key Electric (with back-up pull start)
- Max. Cutting: #8 or 1 ” Grade 60
- Max. Bending: #9 or 1-1/8″ Grade 60
- Cutter Power: 115 Volt 50/60 Hz -12 amps
- Rebar cutter can be easily removed and used in any portable application or locked into a stationary position
- Maximum Cutting Diameter: 5/8" #5 Rebar - Grade 60
- Cutting Speed / Pressure: 2 Seconds / 13 Tons Tool
- Effortless medium-duty applications on vertical and horizontal rebar cutting applications
- Complete in a carrying case with hydraulic oil and a tool kit
- Maximum Bending Diameter: #8 (1") Grade 60
- Bending Angle: 0 – 180 degrees
- Bending Speed: 9 Seconds for 180 degree bend
- Complete with (9) bending rollers in two steel carrying cases, a tool kit, a bender cover, and a standard foot pedal control
- Maximum Bending Diameter 5/8" (#5) Rebar (16mm) Grade 60
- Bending Angle / Speed Up to 180 degrees / 5 seconds
- Voltage/Amperage 115V 50/60Hz / 10 amps
- Tool Weight 90 lbs (40.8 kg)
- Maximum Bending Diameter: 5/8" #5 Rebar - Grade 60
- Bending Angle / Speed: 0 - 135 degrees / 8 Seconds
- Removable bending guide for repeating the same angle bend
- Includes a steel carrying case with hydraulic oil and a tool kit
- Electric/Hydraulic Rebar Bender
- 1.67HP
- 90 Degree Bending Angle
- 4 Second Bend Speed
- Power: 1800W / 15 Amps
- Voltage: 120V/60Hz
- Number of Gears: 2
- No Load Speed I: 150 - 300 rpm
- Maximum Bending Diameter: 7/8" (#7) Rebar Grade 60
- Bending Angle / Speed: Up to 180 degrees / 6 seconds
- Lever-type angle selector can be set to accurately bend any angle from 0-180 degrees
- Complete with a set of (6) bending rollers in a steel carrying case, a tool kit, a bender cover, and a standard foot pedal control
- Power: 600W
- Voltage: 120V/60HZ
- No Load Speed: 0-1000 rpm
- Sanding Motion: Rotation
- Maximum Cutting Diameter: 5/8" #5 Rebar (16mm) - Grade 60
- Voltage/Amperage: 115V 50/60Hz / 10 amps
- Cutting Speed / Pressure: 2.5 Seconds / 15 Tons
- Complete in a carrying case with hydraulic oil and a tool kit
- Maximum Cutting Diameter: 5/8" #5 Rebar - Grade 60
- Cuts per battery /Cutting speed: 75 cuts on full charge / 5 seconds
- Li-ion Battery: 18 Volt DC, 3.0Ah
- Cutting head quickly rotates up to 345 degrees for use in vertical, horizontal, or difficult applications
- Maximum Cutting Diameter: 3/4” #6 Rebar Grade 60
- Cuts per battery /Cutting speed: 75 cuts on full charge / 5 seconds
- Li-ion Battery: 18 Volt DC, 3.0Ah
- Will also cut other items like chain, bolts, and rod
