Heating & Cooling

  • 42,000 BTU/H – 3.5 Ton capacity air cooled
  • Runs on 230V 40-amp 1PH circuit
  • All Direct Drive Blowers for Maintenance Free Use
  • Wide Operating range of 60ºF-105ºF
$8,995.00
$6,746.25
  • 135,000 btu/h cooling capacity
  • Runs on 230V 80-amp 3PH circuit
  • Variable frequency drive airflow control
  • Removable wheels and forklift skid access for easy movement
$35,295.00
$26,471.25
NEW
Ductformer 7.5HP 220V Three Phase 18-26 Ga 12 Station TDFC Rollformer CR12-TDFC at Elite Metal Tools
  • Gauge Range: 18-26 Ga
  • Motor: 7.5HP 220V Three Phase
  • Line Speed: 75 FPM
  • Passline Height: 34”
NEW
Advanced Radiant Systems 120V 10ft 30,000-40,000 Two Stage Unitary Infrared Heater S10-40MBH/30MBH at Elite Metal Tools
  • High Fire Rate (BTU/HR): 40,000
  • Low Fire Rate (BTU/HR): 30,000
  • Heat Exchanger Length: 10 ft
  • Electric Supply: 120 V AC, 60 HZ, 1 Amp: 36” cord, grounded 3 prong plug
  • 270,000 btu/h cooling capacity
  • 166,600 btu/h heating capacity
  • Runs on 460V 80-amp 3PH circuit
  • Variable frequency drive airflow control
$64,995.00
$48,746.25
NEW
Advanced Radiant Systems 120V 20ft 60,000-80,000 BTU Two Stage Unitary Infrared Heater S20-80MBH/60MBH at Elite Metal Tools
  • High Fire Rate (BTU/HR): 80,000
  • Low Fire Rate (BTU/HR): 60,000
  • Heat Exchanger Length: 20 ft
  • Electric Supply: 120 V AC, 60 HZ, 1 Amp: 36” cord, grounded 3 prong plug
NEW
Advanced Radiant Systems 120V 20ft 45,000-60,000 BTU Two Stage Unitary Infrared Heater S20-60MBH/45MBH at Elite Metal Tools
  • High Fire Rate (BTU/HR): 60,000
  • Low Fire Rate (BTU/HR): 45,000
  • Heat Exchanger Length: 20 ft
  • Electric Supply: 120 V AC, 60 HZ, 1 Amp: 36” cord, grounded 3 prong plug
NEW
Ductformer 5HP 240V Three Phase Rollformer CR8 at Elite Metal Tools
  • Motor: 5HP 240V Three Phase
  • Speed: 60 FPM
  • Passline Height: 34”
  • Gauge Capacity w/additional tooling: 16-28
  • 13,800 BTU/H – 1-Ton capacity air-cooled
  • UPLA filters 99.999% of particulates greater than .12 microns in size
  • Internal UVC lights fitted inside each air chamber
  • Runs on 115V 15-amp 1PH circuit
$5,495.00
$4,121.25
  • 60,000 BTU/H – 5 Ton capacity water-cooled
  • Runs on 230V 40-amp 1PH circuit
  • Internal high lift condensate pumps and a 5- gallon reservoir tank
  • Wide Operating range of 60ºF-110ºF
$13,595.00
$10,196.25
NEW
Advanced Radiant Systems DU 120V 30ft 95,000-125,000 BTU Two Stage Unitary Infrared Heater S30-125MBH/95MBH at Elite Metal Tools
  • High Fire Rate (BTU/HR): 125,000
  • Low Fire Rate (BTU/HR): 95,000
  • Heat Exchanger Length: 30 ft
  • Electric Supply: 120 V AC, 60 HZ, 1 Amp: 36” cord, grounded 3 prong plug
NEW
Ductformer 7.5HP 220V Three Phase 18-26 Ga 14 Station TDFC Rollformer CR14-TDFC at Elite Metal Tools
  • Gauge Range: 18-26 Ga
  • Motor: 7.5HP 220V Three Phase
  • Line Speed: 75 FPM
  • Passline Height: 34”
$29,500.00
$28,799.00
NEW
Advanced Radiant Systems DU 120V 20ft 75,000-100,000 BTU Two Stage Unitary Infrared Heater S20-100MBH/75MBH at Elite Metal Tools
  • High Fire Rate (BTU/HR): 100,000
  • Low Fire Rate (BTU/HR): 75,000
  • Heat Exchanger Length: 20 ft
  • Electric Supply: 120 V AC, 60 HZ, 1 Amp: 36” cord, grounded 3 prong plug
NEW
Advanced Radiant Systems DU 120V 40ft 115,000-150,000 BTU Two Stage Unitary Infrared Heater S40-150MBH/115MBH at Elite Metal Tools
  • High Fire Rate (BTU/HR): 150,000
  • Low Fire Rate (BTU/HR): 115,000
  • Heat Exchanger Length: 40 ft
  • Electric Supply: 120 V AC, 60 HZ, 1 Amp: 36” cord, grounded 3 prong plug
NEW
Advanced Radiant Systems DU 120V 70ft 165,000-220,000 BTU Two Stage Unitary Infrared Heater S70-220MBH/165MBH at Elite Metal Tools
  • High Fire Rate (BTU/HR): 220,000
  • Low Fire Rate (BTU/HR): 165,000
  • Heat Exchanger Length: 70 ft
  • Electric Supply: 120 V AC, 60 HZ, 1 Amp: 36” cord, grounded 3 prong plug
NEW
Ductformer 5HP 220V Three Phase Flat S and Drive Cleat Automated Coil Feed Rollform System at Elite Metal Tools
  • Motor: 5HP 220V Three Phase
  • Line Speed: 24 FPM
  • Gauge Capacity: 22-26 Ga
  • Passline Height: 35”
$41,300.00
$39,499.00
  • 270,000 btu/h cooling capacity
  • Runs on 460V 80-amp 3PH circuit
  • Variable frequency drive airflow control
  • Fork lift skid access for easy movement, setup, and transport
$59,495.00
$44,621.25
NEW
Advanced Radiant Systems 120V 20ft 30,000-40,000 Two Stage Unitary Infrared Heater S20-40MBH/30MBH at Elite Metal Tools
  • High Fire Rate (BTU/HR): 40,000
  • Low Fire Rate (BTU/HR): 30,000
  • Heat Exchanger Length: 20 ft
  • Electric Supply: 120 V AC, 60 HZ, 1 Amp: 36” cord, grounded 3 prong plug
NEW
Ductformer 5HP 220V Three Phase Single Head Cleat Former CR8-CF at Elite Metal Tools
  • Motor: 5HP 220V Three Phase
  • Line Speed: 50 FPM
  • Gauge Capacity: 18-26 Ga
  • Passline Height: 34”
$26,400.00
$24,999.00
NEW
Advanced Radiant Systems DU 120V 50ft 130,000-175,000 BTU Two Stage Unitary Infrared Heater S50-175MBH/130MBH at Elite Metal Tools
  • High Fire Rate (BTU/HR): 175,000
  • Low Fire Rate (BTU/HR): 130,000
  • Heat Exchanger Length: 50 ft
  • Electric Supply: 120 V AC, 60 HZ, 1 Amp: 36” cord, grounded 3 prong plug
NEW
Advanced Radiant Systems DU 120V 60ft 165,000-220,000 BTU Two Stage Unitary Infrared Heater S60-220MBH/165MBH at Elite Metal Tools
  • High Fire Rate (BTU/HR): 220,000
  • Low Fire Rate (BTU/HR): 165,000
  • Heat Exchanger Length: 60 ft
  • Electric Supply: 120 V AC, 60 HZ, 1 Amp: 36” cord, grounded 3 prong plug
NEW
Advanced Radiant Systems RS 120V 9ft 45,000 BTU Residential Garage Infrared Heater RS2-45-U20 at Elite Metal Tools
  • Fire Rate (BTU/HR): 45,000
  • Heat Exchanger Length: 9 ft
  • Electric Supply: 120 V AC, 60 HZ, 1 Amp: 36” cord, grounded 3 prong plug
  • Flue and Outside Air Connection: 2” plastic flue adapter provided at the heater
  • BTU: 51195
  • Agency Rating: ETL-CUS
  • Temperature Range: 40° to 100° F
  • Temperature Rise: 45°