CNC Plasma Tables

NEW
Lone Star Trooper 5 x 10 CNC Plasma Down Draft Table Package PLS-TRP-5X10-2 at Elite Metal Tools
  • Cutting Area: 5’6” x 10’6”
  • Positioning Accuracy: 0.007
  • Repeatability: 0.002
  • Gantry Clearance: 6”
NEW
Lone Star 1/2” Hypertherm Powermax 45XP Plasma Cutter PLS-HYP-45 at Elite Metal Tools
  • Max. Pierce: 1/2”
  • Min. Pierce: 3/8”
  • Amps: 45
  • Gas Supply Cutting: Clean, dry, oil-free air, Nitrogen, F-5
  • Fully-welded frame, heavy-duty material support configured for both downdraft or water
  • 6″ x 6″ precision machined aluminum gantry engineered for maximum stiffness
  • 4.5″ clearance under gantry
  • Oversized self-cleaning dual V-groove bearings riding on harden machined V-guide rails
NEW
Lone Star 1” Hypertherm Powermax 125 Plasma Cutter PLS-HYP-125 at Elite Metal Tools
  • Max. Pierce: 1”
  • Min. Pierce: 1/4”
  • Amps: 125
  • Gas Supply: Clean, dry, oil-free air or nitrogen
NEW
Lone Star Trooper 5 x 10 CNC Plasma Water Table Package PLS-TRP-5X10-1 at Elite Metal Tools
  • Cutting Area: 5’6” x 10’6”
  • Positioning Accuracy: 0.007
  • Repeatability: 0.002
  • Gantry Clearance: 6”
  • Fully-welded frame, heavy-duty material support configured for both downdraft or water
  • 6″ x 6″ precision machined aluminum gantry engineered for maximum stiffness
  • 4.5″ clearance under gantry
  • Oversized self-cleaning dual V-groove bearings riding on harden machined V-guide rails
NEW
Lone Star Spitfire 4 x 8 CNC Plasma Down Draft Table Package PLS-SFE-4X8-2 at Elite Metal Tools
  • Cutting Area: 4’1” x 8’1”
  • Positioning Accuracy: 0.007
  • Repeatability: 0.002
  • Gantry Height: 4”
NEW
Lone Star 7/8” 105 Amp Hypertherm Sync 105 Plasma Cutter PLS-HYP-105 at Elite Metal Tools
  • Max. Pierce: 7/8”
  • Min. Pierce: 1/4”
  • Amps: 105
  • Gas Supply: Clean, dry, oil-free air or nitrogen
NEW
Lone Star 3/4” 85 Amp Hypertherm Sync 85 Plasma Cutter PLS-HYP-85 at Elite Metal Tools
  • Max. Pierce: 3/4”
  • Min. Pierce: 1/4”
  • Amps: 85
  • Input Voltage: Duty Cycle at 104 Deg. Fahrenheit
  • Oxy-fuel torch on magnetic QuickConnect™ system
  • Pneumatic Scriber
  • Laser pointer for easy plate alignment
  • Roller ball floating disk for HVAC and light gauge cutting
NEW
Lone Star Spitfire 4 x 8 CNC Plasma Water Table Package PLS-SFE-4X8-1 at Elite Metal Tools
  • Cutting Area: 4’1” x 8’1”
  • Positioning Accuracy: 0.007
  • Repeatability: 0.002
  • Gantry Height: 4”
NEW
Lone Star 5/8” 65 Amp Hypertherm Sync 65 Plasma Cutter PLS-HYP-65 at Elite Metal Tools
  • Max. Pierce: 5/8”
  • Min. Pierce: 1/4”
  • Amps: 65
  • Input Voltage: Duty Cycle at 104 Deg. Fahrenheit
  • 59" x 59" working area.
  • BobCAD-Cam Express programming software Included
  • Travel Speed: 315 Inches Per Minute
  • Table Height: 19.6”
$22,074.50
$18,179.00
  • Travel Speed 315 Inches Per Minute
  • Table Dimensions 60" x 140"
  • Table Load Capacity 1" Mild Steel
  • Capacity Depends on Plasma System Chosen
$50,476.64
$37,259.00
  • Fully-welded frame, heavy-duty material support configured for both downdraft or water
  • 6″ x 6″ precision machined aluminum gantry engineered for maximum stiffness
  • 4.5″ clearance under gantry
  • Oversized self-cleaning dual V-groove bearings riding on harden machined V-guide rails
  • Fully-welded frame, heavy-duty material support configured for both downdraft or water
  • 6″ x 6″ precision machined aluminum gantry engineered for maximum stiffness
  • 5.5″ clearance under gantry
  • Oversized self-cleaning dual V-groove bearings riding on harden machined V-guide rails
NEW
Machitech Automation MaverickCNC 5ft x 5ft Hypertherm Powermax 45A CNC Plasma Table MV55-HT-PM45 at Elite Metal Tools
  • Work Area: 66” x 66”
  • Z-Axis Clearance: 5.5”
  • Z-Axis Travel: 6”
  • Repeatability: +/- 0.001”
NEW
Machitech Automation MaverickCNC 5ft x 5ft CNC Plasma Table with Hypertherm Powermax65 Sync (65A) MV55-HT-PM65 at Elite Metal Tools
  • Work Area: 66” x 66”
  • Z-Axis Clearance: 5.5”
  • Z-Axis Travel: 6”
  • Repeatability: +/- 0.001”
NEW
Machitech Automation MaverickCNC 5ft x 5ft CNC Plasma Table with Hypertherm Powermax85 Sync (85A) MV55-HT-PM85 at Elite Metal Tools
  • Work Area: 66” x 66”
  • Z-Axis Clearance: 5.5”
  • Z-Axis Travel: 6”
  • Repeatability: +/- 0.001”
NEW
Machitech Automation MaverickCNC 5ft x 5ft CNC Plasma Table with Hypertherm Powermax105 Sync (105A) MV55-HT-PM105 at Elite Metal Tools
  • Work Area: 66” x 66”
  • Z-Axis Clearance: 5.5”
  • Z-Axis Travel: 6”
  • Repeatability: +/- 0.001”
NEW
Machitech Automation MaverickCNC 5ft x 5ft CNC Plasma Table with Hypertherm Powermax125 (125A) MV55-HT-PM125 at Elite Metal Tools
  • Work Area: 66” x 66”
  • Z-Axis Clearance: 5.5”
  • Z-Axis Travel: 6”
  • Repeatability: +/- 0.001”
NEW
Machitech Automation MaverickCNC 5ft x 10ft CNC Plasma Table with Air/Mixed Gas Hypertherm MaxPro200 (200A) MV510PRO-MAX200 at Elite Metal Tools
  • Work Area: 66” x 126″
  • Z-Axis Clearance: 8”
  • Z-Axis Travel: 6”
  • Repeatability: +/- 0.001”
NEW
Machitech Automation MaverickCNC 5ft x 10ft CNC Plasma Table with Air/Mixed Gas Hypertherm Powermax45XP (45A) MV510PRO-HT-PM45 at Elite Metal Tools
  • Work Area: 66” x 126″
  • Z-Axis Clearance: 8”
  • Z-Axis Travel: 6”
  • Repeatability: +/- 0.001”
NEW
Machitech Automation MaverickCNC 5ft x 10ft CNC Plasma Table with Air/Mixed Gas Hypertherm Powermax65 Sync (65A) MV510PRO-HT-PM65 at Elite Metal Tools
  • Work Area: 66” x 126″
  • Z-Axis Clearance: 8”
  • Z-Axis Travel: 6”
  • Repeatability: +/- 0.001”