Tooling and Accessories

  • Fits all JET industrial grinders 10" and up
  • Wide stance for stability while grinding
$360.00
$311.00
  • Allows for accurate, repeatable cuts
  • Compatible with Powermatic PM2000B Table Saws
$491.43
$454.00
  • 2 Pin holes are 11mm diameter / 63mm on center
  • 2 Pin holes are 8mm diameter / 45mm on center
  • BLADE DESCRIPTION DEFINITION
  • M2 HSS Steam tempered - 62/64 HRc for ferrous cutting applications
  • The second number is the center hole diameter, 32mm
  • 2 Pin holes are 11mm diameter / 63mm on center
  • 2 Pin holes are 8mm diameter / 45mm on center
  • BLADE DESCRIPTION DEFINITION
  • M2 HSS Bright finish – 54/56 HRc for use on non-ferrous machines at high RPM
  • Replacement Blade for JET J-CK350 350mm x 2.5mm x 32mm x 180T Non Ferrous
  • 2 Pin holes are 11mm diameter / 63mm on center
  • 2 Pin holes are 8mm diameter / 45mm on center
  • BLADE DESCRIPTION DEFINITION
  • Circular Saw Blade 350mm x 2.5mm x 32mm x 360T Ferrous
  • M2 HSS Steam tempered - 62/64 HRc for ferrous cutting applications
  • 2 Pin holes are 11mm diameter / 63mm on center
  • 2 Pin holes are 8mm diameter / 45mm on center
  • BLADE DESCRIPTION DEFINITION
  • M2 HSS Steam tempered - 62/64 HRc for ferrous cutting applications
  • The second number is the center hole diameter, 32mm
$535.71
$486.00
  • 2 Pin holes are 11mm diameter / 63mm on center
  • 2 Pin holes are 8mm diameter / 45mm on center
  • All blades listed have 32mm center holes
  • BLADE DESCRIPTION DEFINITION
  • M2 HSS Steam tempered - 62/64 HRc for ferrous cutting applications
$192.86
$188.00
  • Easily placed with in the exisiting table structure of the PM2820EVS
  • Includes: MDF modular table, (2) MicroJig Matchfit Dovetail Clamps, (2) XPADs, (6) Dovetail Track Screws, and hardware.
$307.14
$272.00
  • Magnetic field turns completely on and off mechanically
  • Does not use an electrical power source
  • Multiplane magnetic grip on five sides.
  • 150 Pounds of Magnetic Holding Force
  • Magnetic field turns completely on and off mechanically
  • Does not use an electrical power source
  • Multiplane magnetic grip on five sides.
  • 607 Pounds of Magnetic Holding Force
$180.82
  • Magnetic field turns completely on and off mechanically
  • Does not use an electrical power source
  • Use 45/135° and 90° angles
  • 76 Pounds of Magnetic Holding Force
  • Bolts securely to the fence rails
  • Duramine™ surface allows smooth workpiece travel, while offering durability
  • Expands the table saw's capacity, especially useful for panel cutting
  • Hole for mounting Rout-R-Lift® (not included)
$540.57
$490.00
  • Filter Type 99% 5 Micron – 91% 1 Micron
  • Number of Filters 2
  • Filter Size 20" x 24"
  • CFM 2450 Max – 2132 Filtered Air
$1,781.43
$1,467.00
  • Adds 18" to diameter of workpiece when mounted down on the leg
  • Cast Iron construction
  • Cast iron construction offers solid durability
  • Extends bed length by 18"
  • Extends bed length by 18" when mounted to the end of the bed
$552.86
$499.00
  • Adjustable glides can level the lathe for less vibration.
  • Easily assembles and bolts to the PM2014 for a freestanding floor model.
  • Most range of height in the Powermatic family. Adjust centerline to floor from 34 inches to 46 inches for maximum control and comfort.
  • Twelve inches of available height adjustments.
$552.86
$499.00
  • Makes it easy to work in a large range of odd angles
  • Each magnet provides three-sided working
  • Provides amazing pivot range from inside 0-270 degrees
  • 150 Pounds of Magnetic Holding Force
$194.73
  • 2 Pin holes are 11mm diameter / 63mm on center
  • 2 Pin holes are 8mm diameter / 45mm on center
  • BLADE DESCRIPTION DEFINITION
  • M2 HSS Steam tempered - 62/64 HRc for ferrous cutting applications
  • The second number is the center hole diameter, 32mm
  • Magnetic field turns completely on and off mechanically
  • Does not use an electrical power source
  • Turn off to wipe away metal shavings and the magnet stays clean.
  • 300 Pounds of Magnetic Holding Force
$230.04