Vices & Clamps

  • BOLT Down Vertical Clamp with 0 – 5 inch clamping envelope and 4-1/2″ throat. Bolt Down Boot securely bolts this clamp to a Weldsale Platen. (will ONLY bolt to used WELDSALE Platens, NOT Generic Used Platens.)
$265.76
  • Vertical Clamp with 0 – 9 inch clamping envelope and 4-1/2 inch throat. Simply drop the Round Knurled boot into a Weldsale 1-3/4″ square hole, tilt the clamp back, slide the arm down until the swivel pads contacts your work piece, and turn the screw.
$208.59
  • Vertical Clamp with 0 – 20 inch clamping envelope and 4-1/2 inch throat. Simply drop the Round Knurled boot into a Weldsale 1-3/4″ square hole, tilt the clamp back, slide the arm down until the swivel pads contacts your work piece, and turn the screw.
$230.66
  • Bench Vise for use on all Weldsale Platens. Includes our WSPLATE, Connector Plate, and all hardware needed to attach Vise to Weldsale Platen.
$403.27
  • Vertical Clamp with 0 – 9 inch clamping envelope and “Long Reach” 7-3/4 inch throat. Simply drop the Round Knurled boot into a Weldsale 1-3/4″ square hole, tilt it back, slide the arm down until swivel pad contacts your work piece, and turn the screw.
$204.70
  • Vertical Clamp with 0 – 20 inch clamping envelope and “long Reach” 7-3/4 inch throat. Fast acting 20 Inch vertical clamp with a long reach
$241.66
  • BOLT Down Vertical Clamp with 0 – 16 inch clamping envelope and 4-1/2″ throat. Bolt Down Boot securely bolts this clamp to a Weldsale Platen. (will ONLY bolt to used WELDSALE Platens, NOT Generic Used Platens.)
$294.69
  • BOLT Down Vertical Clamp with 0 – 16 inch clamping envelope and “Long Reach” 7-3/4 inch throat. Bolt Down Boot securely bolts this clamp to a Weldsale Platen. (will ONLY bolt to used WELDSALE Platens, NOT Generic Used Platens.)
$305.69
  • BOLT Down Vertical Clamp with 0 – 28 inch clamping envelope and 4-1/2″ throat. Bolt Down Boot securely bolts this clamp to a Weldsale Platen. (will ONLY bolt to used WELDSALE Platens, NOT Generic Used Platens.)
$305.69
  • BOLT Down Vertical Clamp with 0 – 28 inch clamping envelope and “Long Reach” 7-3/4″ throat. Bolt Down Boot securely bolts this clamp to a Weldsale Platen. (will ONLY bolt to used WELDSALE Platens, NOT Generic Used Platens.)
$316.69
  • BOLT Down Vertical Clamp with 0 – 5 inch clamping envelope and “Long Reach” 7-3/4″ throat. Bolt Down Boot securely bolts this clamp to a Weldsale Platen. (will ONLY bolt to used WELDSALE Platens, NOT Generic Used Platens.)
$276.76
  • Vertical Pipe Clamp, fast action, with V-Groove Swivel Pad. Will securely hold pipe, curved, narrow, or flat items.
  • This clamp has 0 – 20 inch clamping envelope and 4-1/2 inch throat.
$252.66
  • Vertical Pipe Clamp, fast action, with V-Groove Swivel Pad. Will securely hold pipe, curved, narrow or flat items. Clamping envelope 0 – 9 inches, 4-1/2 inch throat. Clamp fits Weldsale Platens with typical 1-3/4 in. square holes.
$215.70
  • Vertical Pipe Clamp, fast action, with V-Groove Swivel Pad. Will securely hold pipe, curved, narrow or flat items. Clamping envelope 0 – 20 inches with “Long Reach” 7-3/4 inch throat. Clamp fits Weldsale Platens with typical 1-3/4 in. square holes.
$263.66
  • Vertical Pipe Clamp, fast action, with V-Groove Swivel Pad. Will securely hold pipe, curved, narrow or flat items. Clamping envelope 0 – 20 inches, 4-1/2 inch throat. Clamp fits Weldsale Platens with typical 1-3/4 in. square holes.
$226.70
  • Horizontal Clamp. Round Knurled boot fits typical Weldsale 1-3/4″ square hole. Clamping HEIGHT of 2 inch (with sliding arm reversed) to 15 inch. Throw of screw: 3-1/2 inch.
$194.69
  • Horizontal Pipe Clamp, fast action, with V-Groove Pad. In HORIZONTAL position, will securely hold pipe, curved, narrow, or flat items. Clamping height 2 inch (with arm reversed) to 13″. Throw of screw: 3-1/2 inches.
$233.39
  • The WSC-5A is a Clamp created to clamp horizontally across the Platen Surface.
  • This will clamp at a 90˚ angle relative to the sides, and rows, of square holes.
$156.75
  • The WSC-5B is a Clamp created to clamp horizontally across the Platen Surface.
  • This will clamp at a 45˚ angle relative to the sides, and rows, of square holes.
$156.75
  • BOLT Down Horizontal Clamp, 360 degree clamping radius. Simply bolt this down, turn it to the desired radius or direction for clamping and tighten nut. Clamp has a 4-1/2 inch throw.
$159.75
  • Jaw Width: 6 in
  • Jaw Opening: 8.9 in
  • Throat Depth: 1.752 in
  • Equipped with Dual Force anti-lift mechanism
$1,072.00
$925.00
  • Jaw Width           6 in
  • Jaw Opening      8- 3/4 in
  • Throat Depth     1- 3/4 in
  • Equipped with Dual Force anti-lift mechanism
$2,233.00
$1,795.00
  • Jaw Width: 4 in
  • Jaw Opening: 5 in
  • Throat Depth: 1.575 in
  • Hardened jaw plates and vice bed
$1,034.00
$815.00
  • Jaw Width: 6 in
  • Jaw Opening: 6 in
  • Throat Depth: 1.752 in
  • Hardened jaw plates and vise bed
$1,457.00
$1,185.00