IMER USA
Category
IMER is a leader in offering construction equipment headquartered out of Capitol Heights, Maryland. IMER offers mixers, sawing equipment, hoists, and more. IMER is determined to supply the best product lines for their customers, and provide superior customer service. IMER represents quality products to fit their customer's needs.
- Pumping system Twin cylinder with hydraulic control
- Flow rate 2.5 - 20 Cu. Yd. per hour
- Max. pumping pressure 1000 PSI
- Max. aggregate size 1"
- Motor 230 Volt, single phase
- Horsepower 6
- Pumping system IM25L rotor/stator
- Flow rate 6.6 GPM
- Motor 230 Volt, single phase
- Horsepower 6
- Pumping system IM25L rotor/stator
- Flow rate 6.6 GPM
- Drum capacity 22 cu. ft.
- Batch output 16 cu. ft., 1,600 lbs.
- Drum diameter 52"
- Maximum Aggregate Size 3/8"
- Hopper payload capacity 1500 lbs.
- Hopper volume capacity 11.5 cu. ft.
- Weight w/hopper + self-loading shovel 1350 lbs. / 1500 palletized
- Width 31"
- Pumping system 2L6 rotor/stator
- Flow rate 0 - 15 GPM or 4.5 CYPH
- Max. pumping pressure 580 PSI
- Max. aggregate size 1/4" std. 3/8” w / options
- Drum capacity 12 cu.
- Batch output 9 cu. ft., 800 lbs
- Drum diameter 38"
- Maximum Aggregate Size 3/8"
- Blade diameter 10"
- Blade shaft diameter 5/8"
- Blade speed 2.800 r.p.m
- Max. cutting depth 3 ¾"
- Blade diameter / Arbor shaft diameter: 36" / 2-1/3" (60mm)
- Blade speed 910 r.p.m.
- Weight (palletized) 700 (750) lbs.
- Max. cutting length (w/plunge cut) 26" (32")
- Blade diameter 10"
- Blade shaft diameter 5/8"
- Max. cutting length (w/plunge cut) 57" (60")
- Max. cutting depth 3 ¾"
- Supply - 220V/60Hz, 3 phase
- Motor power rate HP 10
- Max grain size In. 3/8
- Flow rate CY/h 9.5
- Blade diameter 14"
- Max. cutting length (w/plunge cut) 26" (30")
- Cutting table dimensions 20” x 16”
- Motor speed 2,850 r.p.m.
- Blade diameter 10"
- Blade speed 2.800 r.p.m.
- Max. cutting length (w/plunge cut) 37" (40")
- Water pump flow 3 g.p.m.
- Blade diameter / Blade shaft diameter 30” / 1”
- Max cutting length (w/plunge) 18” / 27"
- Blade speed 1700 r.p.m.
- Weight (crated) 440 (495) lbs.
- Drum capacity 5 cu. ft.
- Batch output 200 lbs. 2 cu. ft.
- Motor rating 1/2 h.p. 110v / 5 amp
- Drum diameter 24"
- Supply - 220V/60Hz, 3 Phase
- Max. installed power HP 10
- Mixing motor power HP 7.5
- Feeding impellar motor HP 1
- Blade diameter 14"
- Max. cutting length - includes the plunge 48"
- Motor speed 2,800
- Cutting table dimensions 55" x 27.5"
- Drum capacity 5 cu. ft.
- Motor rating 1/2 h.p. 110v / 5 amp
- Batch output 275 lbs., 2.5 cu.ft.
- Drum diameter 24"
- Blade diameter 8"
- Motor rating - 1.75 h.p. 110v, 15 amp
- Blade speed 2.800 r.p.m.
- Max. cutting depth 2 ¾"
- Motor 115 Volt
- Horsepower 1-3/4
- Pumping system 2L3 rotor/stator
- Flow rate 3.5 GPM
