Band Saws

  • Ellis 1600 has a one-step conversion from horizontal to vertical band saw
  • 10" Round Capacity at 90º
  • 11" Flat Capacity at 90º
  • 110V / 220V, 1PH
$3,995.00
$3,695.00
  • 11" Round Capacity at 90º
  • 14" Flat Capacity at 90º
  • Built in protractor for fast and accurate selection of angle cuts.
  • Ellis model 1800 Band Saw features a moveable head both left and right for angle cutting.
  • Band Saw Blade Width: 1-1/2 x 0.05″ (41x1.3mm)
  • Maximum Blade Length: 245-1/4″ (6230mm)
  • Band Speed: 65-328 fpm (20-100mpm)
  • Band Drive: 5 hp (4kW)
  • Blade drive is a belt to sealed, hardened, and ground gear drive system
  • Blade wheels are made from flanged cast iron for increased durability
  • Cast mounted adjustable hydraulic downfeed
  • CSA/CUS Certified
  • Four 8" Rubber Wheels for Ease of Movement
$2,525.71
$2,089.00
  • Adjustable Material Stop
  • Built-in, self-propelled blade brush extends blade life
  • Carbide blade guides feature parallel double-row ball bearing support
  • Coolant is distributed through the blade guides
  • Electronically controlled blade speed from 82 - 330 SFPM
$8,795.71
$7,219.00
  • 14 TPI metal cutting blade included
  • 6 TPI wood cutting blade included
  • Adjustable table
  • Conveniently located on/off switch
  • Gear box design allows wood/metal model saws to be used for a wider variety of metal, wood, non-ferrous metal and plastic cutting applications
$2,782.86
$2,289.00
  • Rack and pinion adjustment on upper blade guide support
  • Cast iron trunnion
  • CSA/US: Following strict guidelines and electrical requirements, this JET Bandsaw is CSA/US certified
  • Fully balanced, cast-iron wheels with rubber tires
  • Fully guarded blade
$6,007.14
$4,919.00
  • Cutting Capacity Round Tube: 18.5" (470mm)
  • Miter Cutting: 60° left and right
  • Maximum Blade Length: 239" (6060mm)
  • Dimensions W x L x H: 138 x 69 x 87"
  • Cast Iron Construction
  • Large Adaptable Work Table
  • Capacity at 90°: 18" x 22"
  • Capacity at 45°: 18" x 12.75"
  • 13-1/2" Round at 90º
  • 2HP 220 Volt Single Phase 3 PH 220-440-460-480-575
  • Blade Speed 75-195fpm
  • Hydraulic Cylinder
  • Machine Voltage: 240V
  • Blade Size: 1” x 12’ 4”
  • Blade Drive: 3 HP VFD
  • Blade Speed: 49-377 SFM
  • Adjustable Material Stop
  • Blade guides feature parallel double-row ball bearing support
  • Built-in, self-propelled blade brush extends blade life
  • Carbide blade guides feature parallel double-row ball bearing support
  • Coolant is distributed through the blade guides
$6,345.10
$5,179.00
  • Machine Capacity: 31" x 27"
  • Production Level: High
  • Cutting Capacity Round: 27"
  • Band Speed: 72-390 fpm
  • Blade Travel: 14" into work
  • Cutting Capacity at 90°: Round: 14" Rectangle: 14" x 20"
  • Table: Precision Ground Cast Iron Table: 32 1/4" x 26 1/4"
  • Motor: 2HP 440V three-phase (TEFC)
  • 110Volt - Optional 220Volt
  • 3/4" Blade 
  • 3-Speeds - Direct Dirve
  • 7" Round Capacity
$2,735.71
$2,259.00
  • Adjustable Material Stop
  • Built-in, self-propelled blade brush extends blade life
  • Easily accessible saw control panel
  • Fully adjustable hydraulic downfeed system
  • Hardened and ground drive shaft and worm gears transmit maximum torque to blade wheels
$4,357.14
$3,569.00
  • Magnetic Starter with 110v Control Circuit and Overload Protection
  • Fixed Table Models 26-3/4" (680mm) x 29" (736mm) Heavy-duty Cast Iron Table with two-way tilt (15°L & 45°R)
  • 3/4" (19mm) Carbon Hardback Blade
  • Two (2) year limited warranty
  • Spring-Loaded Carbide Guides with Rollers 
  • Baldor Motor: 3hp motor 3 phase TEFC / 2hp single phase ODP 
  • Wet Cutting System 
  • Quick Acting Vise 
  • Adjustable vise
  • Automatic shut off switch stops the sawing process
  • Blade is fully guarded for Operator safety
  • Built-in, self-propelled blade brush prevents chip build up in blade guides
  • Head is pressure controlled by a hydraulic cylinder
$5,021.43
$4,109.00
  • Round Capacity: 26"
  • Rectangular Capacity (HxW): 20.5" x 40"
  • Blade Speed: 50 - 295 FPM
  • Workbed Height: 25.6"
  • Round Capacity at 0°: 18.5”
  • Rectangular Capacity at 0°: 16.5” x 28”
  • Blade Motor: 7.5 HP
  • Workbed Height: 26.4"
  • Round Capacity at 0°: 13”
  • Rectangular Capacity at 0°: 11” x 19.7”
  • Blade Motor: 3 HP
  • Workbed Height: 32.3"
  • Cutting Capacity Round Tube: 18.5″ (470mm)
  • Miter Cutting: 60° left and right
  • Maximum Blade Length: 238.6″ (6060mm)
  • Dimensions W x L x H: 126 x 192 x 94″ (3200x4880x2390mm)
  • Machine Capacity: 20" x 13"
  • Production Level: Low
  • Table: 26" x 26"
  • Band Speed: 30-320 fpm; 550-5,500 fpm