Grizzly Industrial

  • Motor: 2.5 HP at 1720 RPM; 220V, 10A
  • Spindle speeds: 8, 70–2000 RPM
  • Range of threads (inches): 34 @ 4–56 TPI
  • Spindle length: 17-1/4"

  • Tool changer: 10 positions
  • Table size: 10-1/4" x 31-1/2"
  • Longitudinal travel: 15-3/4"
  • Spindle motor: 3 HP, Servo, 3 Phase, 220V, 60Hz

  • Table size: 18" x 102"
  • Maximum cutting width: 18"
  • Maximum stock thickness: 8"
  • Maximum cutting depth: 5/16"

  • Motor: 3HP, 220V, 13.8A, single-phase
  • Table size: 9" x 49" x 3-3/4"
  • Head ram travel: 12" (front to back)
  • Head tilt: 45° left & right, 90° front & back

  • Bed width: 7-1/4"
  • Maximum lathe tool bit size: 5/8"
  • Lathe spindle length: 17"
  • Number of speeds: 9 (lathe), 4 (mill/drill)

  • Main motor: 20 HP, 220V/440V
  • Saw wheel size: 28" x 7/8"
  • Saw blade size: 168" x 1"
  • Conveyor table: 12" wide x 102" long

  • Swing over bed: 13"
  • Motor: 4 HP, 220V
  • Coolant capacity: 14 gallons
  • Spindle speed range: 30-4000 RPM

  • Spindle to work table: 12"
  • Lathe speed range: 175-1425 RPM
  • Mill/drill speed range: 120-1500 RPM
  • Motor size (single phase 110V): 3/4 H.P.

  • Main motor: 10 HP, 220V/440V, 3-phase
  • Length of crosscut: 126"
  • Sliding table size: 15-5/8" x 126"
  • Maximum rip capacity: 51-1/2"

  • Maximum board thickness: 6"
  • Minimum board length: 14"
  • Sanding belt size: 37" W x 60"
  • Footprint: 19" x 51-1/2"

  • Swing over bed: 16-1/2"
  • Cross slide travel: 4-1/2"
  • Lathe max tool size: 1/2"
  • Motor size (Single phase 110V): 3/4 H.P.

  • Motor: 600W (3/4 HP), 110V
  • Vertical head travel: 6-5/16"
  • Distance between centers: 15-3/4"
  • Distance between centers: 15-3/4"

  • Motor: 3 HP, 240V, Single-phase
  • Maximum cutting width: 15"
  • Maximum stock thickness: 8"
  • Table size: 20" x 15"

  • Motor: 2 HP, 110V/220V, Single-phase
  • Spindle travel: 4-11/16"
  • Max. distance spindle to table: 17-5/16"
  • Table size: 8-1/4" x 28-3/4"

  • Motor: 5 HP, 230V, single-phase
  • Sliding table size: 12-1/4" x 63"
  • Maximum rip capacity: 33"
  • Main table dimensions: 14-3/8" x 27"

  • Motor: 1 HP, 110V, 12A, single-phase
  • Head travel: 11"
  • Max. distance spindle to table: 13"
  • Table size: 7-1/16" x 26-5/8"

  • Swing over bed: 9-1/2"
  • Swing over cross slide: 6-1/8"
  • Motor: 1 HP, 110V, Single-phase
  • Maximum tool size: 1/2"

  • Bed width: 7-1/16"
  • Spindle length: 16-5/16"
  • Compound travel: 3-1/4"
  • Motor: 2 HP, 220V, single-phase

  • Motor: 10 HP, 220V/440V*, 3-phase
  • Primary filter: 99.9% at 0.2-2 microns
  • Collection drums: Steel, 55 gallon x 2
  • Filter surface area: 398 sq. ft

  • Motor: 3 HP, 240V, single-phase, 15A, TEFC, 3450 RPM
  • Total table size: 8" x 76-3/8"
  • Cutterhead speed: 4800 RPM
  • Cutterhead diameter: 3-3/8"

 


  • Motor: 2 HP, 240V, Single-phase
  • Cutterhead speed: 5400 RPM
  • Jointer table size: 7-3/8" x 45-7/8"
  • Jointer knife size: 6" x 5/8" x 1/8"

  • Swing over: bed 8-1/4", cross slide 4-5/8"
  • Distance between centers: 15-3/4"
  • Motor: 600W (3/4 HP), 110V, DC, 10A
  • Spindle speed ranges: Low 50–1000, High 100–2000 RPM

  • Motor: 1.5 HP, 110V/220V, prewired 110V, 17.8A/8.6A, single-phase, TEFC
  • Table size: 6-1/8" x 26"
  • Max. drilling capacity for cast iron: 1"
  • Max. drilling capacity for steel: 3/4"

  • Motor: 2 HP, 220V, single phase, 1725 RPM
  • Blade speeds: Variable, 98-394 FPM
  • Miter cutting capacity: -45 degree to +60 degree
  • Floor to table height: 20"