GMC Machinery

  • Heavy Duty main motor 3HP, 220V, 1 phase
  • Spindle bore 1 1/2”
  • 8 spindle speeds from 70-2,000 rpm
  • Heavy Duty guideway width 7 1/2”
  • Max. swing over bed: 16-1/16"
  • Max. length of workpiece: 60"
  • Max. swing over cross slide: 10 1/4"
  • Main motor: 6 HP, 220V, 3 Phase
  • Max. swing over bed: 14 7/8"
  • Max. length of workpiece: 40"
  • Max. swing over cross slide: 10 1/16"
  • Main motor: 6 HP, 220V, 3 Phase
  • Max. swing over bed: 16-1/16"
  • Max. length of workpiece: 40"
  • Max. swing over cross slide: 10 1/4"
  • Main motor: 6 HP, 220V, 3 Phase
  • Standing Capacity: 24” x 6-1/8”
  • Abrasive Belt Size: 25” x 60”
  • Passline Height: 31” – 37”
  • Max Thickness Capacity: 6-1/8”
  • Heavy Duty main motor 3HP, 220V, 3 phase
  • Spindle bore 1 1/2”
  • 8 spindle speeds from 70-2,000 rpm
  • Heavy Duty guideway width 7 1/2”
  • Inlet CFM: 2100 CFM
  • Inlet Opening: 8”
  • Motor HP: 5 HP
  • Voltage: 230V, 3-Phase
  • Capacity: 20 Ga to 26 Ga
  • Depth of Pocket: 5/16”
  • Feeding Speed: 32 FPM
  • Main Motor: 1.5 HP, 110V
  • Mild Steel Max Capacity: 18 Ga
  • Stainless Steel Max Capacity: 22 Ga
  • Throat Depth: 8"
  • Cylinder Length: 5 1/2"
  • Bending Capacity in Mild Steel: 14 Gauge
  • Bending Capacity in Stainless Steel: 18 Gauge
  • Max Box Depth: 6”
  • Bending Length Capacity: 10’
  • Max Bending Length: 4’
  • Bend Angle Degree: 135°
  • Max Box Depth: 4”
  • Main Motor: 5 HP
  • Maximum pressure: 45 Tons
  • Bending length capacity: 59-1/4” (4’1”)
  • Distance between uprights (housing):  33-1/2”
  • Throat Depth: 8-1/2”
  • Max Bending Length: 10’
  • Bend Angle Degree: 135°
  • Max Box Depth: 6”
  • Main Motor: 10 HP
  • Bending Capacity in Mild Steel: 12 Gauge
  • Bending Capacity in Stainless Steel: 16 Gauge
  • Max Box Depth: 6”
  • Bending Length Capacity: 4’
  • Capacity Mild Steel: 14 Ga
  • Capacity Stainless Steel: 16 Ga
  • Bending Length Capacity: 10’
  • Max Table Back Gauge Distance: 48-3/8”
  • Mild Steel Capacity: 10 Ga.
  • Stainless Steel Capacity: 12 Ga.
  • Bending length capacity: 10'
  • Max. Box Depth: 6"
  • Max Bending Length: 8’
  • Bend Angle Degree: 135°
  • Max Box Depth: 6”
  • Main Motor: 7.5 HP
  • Dia. Of Roller: 7.5 Inch
  • Dia. Of Roller Shaft: 2 in
  • Roller Speed: 16 RPM
  • Motor: 3 HP 220v/440v 3-Phase
  • Bending Capacity: (Mild Steel): 14 Ga.
  • Bending Capacity (Stainless Steel): 18 Ga.
  • Bending Length Capacity: 10'
  • Bending Angle Degree: 0-135°
  • Powered up/down with push button & display
  • Capacity Mild Steel: 6'8" x 10 Ga
  • Capacity Stainless Steel: 6'8” x 14 Ga
  • Rolls Speed: 20 ft/min
  • Max Capacity Mild Steel: ¼”
  • Max Capacity Stainless Steel: 3/16”
  • Max Cutting Length: 10”
  • Main Motor: 7-1/2 HP, 220V
  • Standing Capacity: 40” x 6-1/8”
  • Abrasive Belt Size: 40” x 75”
  • Passline Height: 31” – 37”
  • Max Thickness Capacity: 6-1/8”
  • Dia. Of Roller: 7.5 Inch
  • Dia. Of Roller Shaft: 2 in
  • Roller Speed: 16 RPM
  • Comes with Top Roller Hydraulic Positioning
  • Main Motor: 5.5 HP
  • Roll Capacity Mild Steel: 5’ x ¼”
  • Roll Capacity Stainless Steel: 5’ x 3/16”
  • Min Roll Dia.: 9-7/8”