Marvel

  • Cast Iron Construction
  • Large Adaptable Work Table
  • Capacity at 90°: 18" x 22"
  • Capacity at 45°: 18" x 12.75"
  • Ironwork with 60 Ton Capacity
  • 7-1/2 H.P.
  • 10” Throat
  • 5 Work Stations
  • Automatic Indexing
  • 10 HP High-Speed Bandsaw
  • Programmable Control
  • Servo Shuttle
  • All-Mechanical Design
  • Cast Iron Construction
  • Large Adaptable Work Table
  • Semi-Automatic
  • All-Mechanical Design
  • Cast Iron Construction
  • Large Adaptable Work Table
  • Semi-Automatic
  • Cast Iron Construction
  • Large Adaptable Work Table
  • Capacity at 90°: 18" x 22"
  • Capacity at 45°: 18" x 12.75"
  • Capacity at 90°: 22" x 24.5" Square, 22" Round. 4" Minimum Clamp.
  • 10 HP Motor
  • 2” Blade
  • Programmable Control
  • Capacity: 22” x 28” Rectangular, 22” Round. Minimum Vise Clamp 4.33”
  • Speed Range: 60 – 265 feet per minute
  • 10 HP Motor
  • 2” Blade
  • 192 Ton Capacity
  • 15 H.P.
  • 24-9/16” Throat
  • 5 Work Stations
  • All-Mechanical Design
  • Cast Iron Construction
  • Large Adaptable Work Table
  • Semi-Automatic
  • 93 Ton Capacity
  • 10 H.P.
  • 14” Throat
  • 5 Work Stations
  • Blade speeds: 105, 175, 270 and 375 feet per minute
  • 3 HP Motor
  • 60° Miter Cutting
  • Hydraulic Vise
  • 126 Ton Capacity
  • 15 H.P.
  • D 14” Throat
  • DX 24″ Throat
  • Table Height: 40"
  • Blade Drive: 7.5 HP
  • Blade Size: 18'2" x 1.5" x .05
  • Voltage: 460V 3-Phase
  • Blade speeds: 105, 175, 270 and 375 feet per minute
  • 3 HP Motor
  • 60° Miter Cutting
  • Hydraulic Vise
  • Capacity: 14” x 14” rectangle (360 x 360 mm), 13” round (360mm)
  • 1-1/4” Blade
  • Automatic Chip Removal
  • Hydraulic Down Feed
  • Blade speeds: 105, 175, 270 and 375 feet per minute
  • 3 HP Motor
  • 60° Miter Cutting
  • Hydraulic Vise
  • Capacity: 14” x 14” rectangular (360 x 360 mm), 14” round (360mm)
  • Table Height: 27” (686 mm)
  • 1-1/4” Blade
  • Programmable Control
  • Capacity: 14” x 14” rectangle (360 x 360 mm), 13” round (360mm)
  • 1-1/4” Blade
  • Automatic Chip Removal
  • Hydraulic Down Feed
  • Capacity at 90°: 28" x 32", 28" Round, 11.2" min. clamp width.
  • 10 HP Motor
  • 2” Blade
  • Programmable Control
  • Touch Screen Control
  • Speed Range: 60-400FPM
  • ± 60 Degree Miter
  • Hydraulically Controlled Blade Tension
  • Capacity: 20” Blade to Column; 12” Work Height
  • 3 HP Motor
  • 1” Blade
  • Tilt Table
  • Table Height: 38"
  • Blade Drive: 7.5 HP
  • Blade Size: 17'6" x 1.25" x .042
  • Voltage: 460V 3-Phase
  • Capacity: 12" W x 10.25" H, 10.25" Round
  • Table Height: 27"
  • 1-1/4” Blade
  • MPC Programmable Control