Scotchman

  • Punching Capacity: 120 ton 1-1/2" in 1"
  • 24" Brake: 65 ton
  • 90° V. Notcher: 6" x 6" x 5/16"
  • Steel Surchage may apply
  • Punching Capacity: 50 ton | 1-1/4" in 1/2" | 13/16" in 3/4"
  • Square Tube Shear: 1/2" to 1" ; 12 ga.
  • 45° Angle Shear: 2" x 2" x 3/8"
  • Steel Surcharge may apply
  • Round Tube: Up to 3-1/2"
  • Square Solid: Up to 1-1/2" x 1-1/2"
  • Maximum Saw Blade Diameter: 12-1/2"
  • Steel Surcharge may apply
  • Throat Depth: 4"
  • Square Tube Shear: 12 ga. 1/2" to 1"
  • Hydraulics: 2100 psi
  • Steel Surcharge may apply
  • Maximum opening height – 36-1/2"
  • Width between uprights – 43-1/4"
  • Table Size - 68-1/2” x 39-1/4”
  • Steel Surcharge may apply
  • Maximum opening height - 36"
  • Width between uprights – 43-1/4"
  • Stroke - 15"
  • Steel Surcharge may apply
  • Maximum opening height - 36"
  • Width between uprights – 43-1/4"
  • Stroke - 15"
  • Steel Surcharge may apply
  • Punching Capacity: 45 Ton , 1-1/8" in 1/2"
  • Round Rod: 3/4"
  • 12" Brake: 20 Ton
  • Steel Surcharge may apply
  • Maximum opening height – 36-1/2"
  • Width between uprights – 43-1/4"
  • Table Size - 68-1/2” x 39-1/4”
  • Steel Surcharge may apply
  • Rectangle Notcher: 2" x 2-1/2" x 3/8"
  • Channel Shear: 2" to 5" Adj.
  • Open End Brake: Flat or Angle Iron Max. 1/4" x 5" 
  • Steel Surcharge may apply
  • Motor: 3-1/2 hp 3ph 230v
  • Vent Notch Maximum Wall Thickness: .197"
  • Includes Vent Notch to Quickly Create a Uniform Vent-notch
  • Steel Surcharge may apply
  • Outer Tube Diameter: 1-1/4" and 1-1/2" Pipe
  • Maximum Wall thickness: .155"
  • Ideal for Double Corner Joints
  • Steel Surcharge may apply
  • Punching Capacity: 95 ton, 1-3/16" in 1"
  • V-Notch: 3" x 3" x 3/8"
  • Square Tube Shear: 12 gauge, 1/2" to 2" 
  • Steel Surcharge may apply
  • Cutting Speeds: 3,000 rpm
  • Round Tube: Up to 3-1/2"
  • Square Tube: Up to 3-1/8" x 3-1/8"
  • Steel Surcharge may apply
  • Tubing at 45 Deg Square: 4" x 4"
  • Maximum Diameter Blade: 14"
  • Arbor Bore: 1-9/16"
  • Steel Surcharge may apply
  • Punching Capacity: 70 ton | 1-1/8" in 3/4"
  • 90° V. Notcher: 6" x 6" x 5/16"
  • Square Tube Shear: 1/2" to 2", 12 gauge
  • Steel Surcharge may apply
  • Tubing at 90 Deg Round: 4-1/2"
  • Tubing at 45 Deg Round: 4-1/4"
  • Cutting Speed: 3,000 rpm
  • Steel Surcharge may apply
  • Two Cutting Speeds
  • Tubing 90 Deg Round: 8-1/4"
  • Tubing 45 Deg Round: 7"
  • Steel Surcharge may apply
  • Tubing 90 Deg Square: 3" x 3"
  • Maximum Diameter Blade: 10-3/4"
  • Pin Spacing: 2/8/45
  • Steel Surcharge may apply
  • Grinding Capacity: 1/2" to 4" O.D.
  • Angle Range: Straight=90° to 30°
  • Speed: 3420 RPM
  • Steel Surcharge may apply
  • Cutting Speeds (Mild Steel): Variable Speed 11 to 177 rpm
  • Round Tube: Up to 3-1/2"
  • Round Solid: Up to 1-3/4"
  • Steel Surcharge may apply
  • Outer Tube Diameter: 3/4", 1", 2"
  • Maximum Wall Thickness: .155"
  • Requires No Change-over
  • Steel Surcharge may apply
  • Grinding Capacity: 1/2" to 3" O.D
  • Angle Range: Straight=90° to 30°
  • Belt: 4" x 78-3/4"
  • Steel Surcharge may apply
  • V-Notch: 3" x 3" x 1/2"
  • Channel Shear: 2" to 6" Adj.
  • Square Tube Shear: 12 ga. 1/2" to 2"
  • Steel Surcharge may apply