JET

  • Backlash adjustments provided throughout the carriage
  • Emergency stop within easy reach of the Operator
  • Full Length Splash Guard
  • Induction hardened and ground bedway
  • Power longitudinal feed allows threading and reverse threading
$5,070.00
$4,269.00
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
$4,074.29
$3,339.00
  • Four Workstations: Punch, Flat Bar Shear, Angle Shear & Rod Shear
  • Operates on 115V power allowing use almost anywhere
  • ANSI Compliant Guarding on the Angle & Rod Shears
  • E-stop with UL Listed compliant controls providing additional operator safety
  • Includes a Punch & Die Storage Tray able to hold up to 10 Punch & Die Sets
$7,891.64
$6,499.00
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
$8,280.00
$6,689.00
  • Compound and cross slide have backlash elimination
  • Electronic Chuck Key Docking Station
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Independent lead screw and feed rod
$24,465.71
$19,999.00
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
$34,248.57
$28,299.00
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
$7,062.86
$5,829.00
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
$7,506.00
$4,784.00
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
$57,228.57
$46,759.00
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
$17,917.14
$14,499.00
  • 12" 3 Jaw scroll chuck with top reversing jaws
  • 2 Steady rests with roller bearings
  • Bed ways are induction hardened and ground for durability
  • E-Stop on Carriage for added safety
  • Electronic Chuck Key Holder
$56,127.14
$46,675.00
  • Adjustable Material Stop
  • Blade guides feature parallel double-row ball bearing support
  • Carbide blade guides feature parallel double-row ball bearing support
  • Cast iron construction
  • Easy-to-use belt drive tensioner does not require tools for blade speed changes or belt replacement
$5,097.14
$4,219.00
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
$32,517.14
$26,939.00
  • Certified Meehanite® castings
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
$13,607.14
$10,999.00
  • 6" 3-jaw direct mount chuck with top reversing jaw
  • Compound and cross slide have backlash elimination
  • Fast, easy speed changes
  • Hardened and ground gears are featured in the headstock and gearbox
  • Image shown with optional bench, p/n 321443AK
$14,695.71
$12,129.00
  • Self-Cooling Drum
  • Drum is easily removable
  • Drum utilizes sealed and permanently lubricated ball bearings for longer life
  • Dust hose hanger for added ease of use
  • Integrated on/off switch and variable speed control knob are conveniently located
$2,764.27
$2,264.00
  • Benchtop mounting fits on almost any bench in your shop
  • CSA/CUS Certified
  • Insert the end of the pipe, notch one side, rotate pipe 180°, reinsert to notch the other side
  • Magnetic Switch for Low Voltage Motor Protection
  • Replacement dies available in wide range of sizes
$5,244.50
$4,319.00
  • 1/2" Drill chuck and arbor included
  • 3" column diameter for maximum head support
  • 6" stroke for deep hole application
  • Full bearing support on quill for maximum spindle stiffness
  • Handwheel speed adjustment of 400 to 5,000 RPM
$3,071.43
$2,529.00
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
$16,227.14
$13,259.00
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
$21,402.86
$17,369.00
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
$31,847.14
$25,969.00
  • Compound and cross slide have backlash elimination
  • Electronic Chuck Key Docking Station
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Independent lead screw and feed rod
$24,465.71
$19,999.00
  • CSA/CUS Certified
  • Front Mounted LED Spindle RPM Readout
  • Front mounted positive control depth stop
  • Head is massively constructed for more accuracy and rigidity and heavy duty cast iron design
  • Massive 3" quill diameter
$6,390.00
$5,159.00
  • 1/4" x 14/18VT Bi-metal blade
  • Bi-Metal blade welder, grinder, and cutter
  • Blade and tire cleaning brush
  • Blade welder, grinder, and cutter
  • Easy to read blade tension indicator
$20,461.43
$16,629.00

Jet Equipment was born in 1958. Jet began as a small dealer of manual chain hoists and trolleys; sold from a single hardware store in Tacoma, WA. Over the years, Jet has carried everything from electric chain hoists, air hoists. Beginning in the 70's Jet introduced a full line of industrial air tools and material handling products which included paving breakers and backfill tampers and forklifts. By the early '80s, as JET continued to grow, the metalworking products became the core business line. And 5 short years later, JET launched it's woodworking product category rounding out the largest breath of product categories under one brand. JET pioneered the import business by working with overseas suppliers. We are proud to say we still do business with one of our original suppliers. In the 90's JET grew from being just an importer of high quality machines and tools to designing and manufacturing its own products to stringent specifications. We are have an expert team of engineers both in the USA and overseas and a world-class supply chain ensuring prompt delivery of quality products. Over the years, our colors have changed from blue, to green, orange, and finally white that you see today on most of our products. Our product lines have grown, and the distribution centers have expanded; but one thing has remained the same. JET still carries the same message of quality product, with the best features and benefits in it's product class; all the while providing excellent service. We pride ourselves on bringing new products to our consumers and working with world class distributors.