Cantek

  • 7.5 hp three phase main motor with 1 hp scoring motor
  • Max rip cutting width: 51.2”
  • Sliding table dimension: 126″ x 14.9″
  • Blade tilting adjustment: 0°~45°
  • Maximum working Width: 40”
  • Maximum working Thickness: 8”
  • Feed speed (variable): 23-65 FPM
  • Table size: 40” x 103” high
  • Table area: 42″x55”
  • Spiral Cutterhead diameter: 5.9″(150mm)
  • Cutterhead speed: 4,600 RPM
  • Maximum depth of cut: 5/16″ (8 mm)
  • Allows for 4 cutting modes: single two, three and 4-side planing and moulding.
  • Individual powerful motor drive for each spindle.
  • Equipped with 3 depth of cut control plates for bottom cutterhead.
  • Automatic machine stop when top guard is opened.
  • 5 HP single phase main motor with 1 HP scoring motor
  • 51″ rip capacity
  • Sliding table dimensions: 10 ft. x 14”
  • Blade tilt: 0 – 45°
  • Fixed pitch: 1” (25mm)
  • Spindle diameter shank: 0.472” (12mm)
  • Spindle motor: 2 HP
  • Feed speeds: (3) 16, 22, 31 cycles/min
  • 5 hp three phase main motor with 1 hp scoring motor
  • Max rip cutting width: 51.2”
  • Sliding table dimension: 126″ x 14.9″
  • Blade tilting adjustment: 0°~45°
  • Min. workpiece size: 7.9″ x 2.4″
  • Max. workpiece size: 59″ x 16.5″
  • Dovetail spacing: 1″, 1.5″, 2″, 2.5″
  • Table height from floor: 46.5″
  • 21 spindles driven by steel gears
  • Table size: 43 5/16” x 15 ¾”
  • Motor: 2 HP
  • Distance between spindles: 32mm
  • Feeding speed: 23 FPM (7 m/min.)
  • Panel thickness: 0.315~1.77” (8~45 mm)
  • Edge thickness: 0.0158”~0.118”  (0.4 ~ 3 mm)
  • Power: 5 HP Three Phase
  • Saw blade diameter: 8 – 12″
  • Feed speeds: 3 (50, 65, 85 FPM)
  • Table size: 30″ x 50″
  • Table height: 31-7/8″
  • Max. width: 20"
  • Max. thickness: 8-5/8"
  • Feed speed: 20 & 30 FPM
  • Main motor: 5 HP
  • Feeding speed: 29.5 FPM (9 m/min.)
  • Panel thickness: 0.315~1.77” (8~45 mm)
  • Edge thickness: 0.0158”~0.118” (0.4 ~ 3 mm)
  • Power: 7.4 HP Three Phase 230V
  • Feeding speed: 23 FPM (7 m/min.)
  • Panel thickness: 0.472~1.77” (12~45 mm)
  • Edge thickness: 0.0158”~0.118”  (0.4 ~ 3 mm)
  • Working table height: 33.7” (856mm)
  • Saw wheel diameter: 20″
  • Motor: 3HP
  • Table Size: 26-3/4″ x 20-1/2″
  • Throat Capacity: 18-3/4″
  • 7.5 hp three phase main motor with 1 hp scoring motor
  • Max rip cutting width: 51.2”
  • Sliding table dimension: 102.4″ x 14.9″
  • Blade tilting adjustment: 0°~45°
  • Max. width: 20"
  • Max. thickness: 8-5/8"
  • Feed speed: 20 & 30 FPM
  • Main motor: 5 HP
  • Two Sanding Heads
  • Maximum width stock 36”
  • Maximum thickness opening 5”
  • Electrics 230/3/60
  • Max. width: 24"
  • Max. thickness: 8"
  • Feed speed: 20 & 30 FPM
  • Main motor: 7 ½ HP
  • Table area: 35 ¼” x 55”
  • Spiral Cutterhead diameter: 5.9" (150mm)
  • Cutterhead speed: 4600 RPM
  • Maximum depth of cut: 5/16" (8 mm)
  • Programmable rip fence with maximum cutting width of 51”
  • Motorized blade rise/fall
  • Motorized blade tilting with electronic angle display on control panel
  • 7.5 HP main motor with 1HP scoring motor
  • 2 in 1 machine for rip and curve band sawing
  • Saw Wheel Diameter: 24″
  • Table Size: 31-1/2″ x 23-3/4″
  • Throat Capacity: 22-7/8″
  • Feeding speed: 29.5 FPM (9 m/min.)
  • Panel thickness: 0.315~1.77” (8~45 mm)
  • Edge thickness: 0.0158”~0.118” (0.4 ~ 3 mm)
  • Power: 7.4 HP Single Phase 230V
  • 5 hp single phase main motor with 1 hp scoring motor
  • Max rip cutting width: 51.2”
  • Sliding table dimension: 102.4″ x 14.9″
  • Blade tilting adjustment: 0°~45°