Cantek

  • Layout
Cantek Three Phase 4 Side Planer Moulder M412 at Elite Metal Tools
Cantek Three Phase 4 Side Planer Moulder M412
  • Allows for 4 cutting modes: single two, three and 4-side planing and moulding.
  • Individual powerful motor drive for each spindle.
  • Equipped with 3 depth of cut control plates for bottom cutterhead.
  • Automatic machine stop when top guard is opened.
$24,045
As low as $475.85/mo
View Details
Cantek 2 HP Three Phase Automatic Dovetailer JDT-75 at Elite Metal Tools
Cantek 2 HP Three Phase Automatic Dovetailer JDT-75
  • Fixed pitch: 1” (25mm)
  • Spindle diameter shank: 0.472” (12mm)
  • Spindle motor: 2 HP
  • Feed speeds: (3) 16, 22, 31 cycles/min
$12,390
As low as $402.67/mo
View Details
Cantek 30” x 8” High Speed Double Surface Planer GT760ARD-8 at Elite Metal Tools
Cantek 30” x 8” High Speed Double Surface Planer GT760ARD-8
  • Maximum working width: 30”
  • Cutterhead diameter: 4”
  • Cutterhead speed: 5000 RPM
  • Feed speed (variable): 23-65 FPM
$46,725
As low as $924.68/mo
View Details
Cantek 16” Single Head Horizontal Band Resaw HR400PB at Elite Metal Tools
Cantek 16” Single Head Horizontal Band Resaw HR400PB
  • Max. working capacity (W x H): 15 3/4″ x 9.8″     
  • Saw wheel diameter: 28″             
  • Feed speed: variable: 13~90 FPM             
  • Conveyor belt size: 15.16″ x 215.4″              
$32,340
As low as $640.00/mo
View Details
Cantek Single Phase Manual Dovetail Machine JDT-65 at Elite Metal Tools
Cantek Single Phase Manual Dovetail Machine JDT-65
  • Min. workpiece size: 7.9″ x 2.4″
  • Max. workpiece size: 59″ x 16.5″
  • Dovetail spacing: 1″, 1.5″, 2″, 2.5″
  • Table height from floor: 46.5″
$7,035
As low as $228.63/mo
View Details
Cantek 2HP Pneumatic Hollow Chisel Mortiser PCM120 at Elite Metal Tools
Cantek 2HP Pneumatic Hollow Chisel Mortiser PCM120
  • Max. Stock Width: 12”
  • Max. Mortising Depth: 4”
  • Chisel Range: 1/4″-3/4″
  • Spindle Speed: 3400 RPM
$7,035
As low as $228.63/mo
View Details
Cantek 5HP 230V 14” Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS14 at Elite Metal Tools
Cantek 5HP 230V 14” Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS14
  • Cutting Capacity (Thickness x Width): 1″ x 10″, 2″ x 9″, 3″ x 8″
  • Cycle Speed: 95 strokes/min
  • Cycle Operation: Air
  • Saw Blade Size: 14″
$7,035
As low as $228.63/mo
View Details
Cantek Three Phase 230V Automatic Edgebander with Premilling & Corner Rounding MX370P at Elite Metal Tools
Cantek Three Phase 230V Automatic Edgebander with Premilling & Corner Rounding MX370P
  • Panel thickness: 0.315”~1.77” (8~45 mm)
  • Edge thickness: 0.0158”~0.118” (0.4 ~ 3 mm)
  • Working table height: 38” (960 mm)
  • Power: 10.9 HP 230V Three Phase
$40,215
As low as $795.85/mo
View Details
Cantek 3 HP Single Phase 12” Spiral Head Jointer J127LH at Elite Metal Tools
Cantek 3 HP Single Phase 12” Spiral Head Jointer J127LH
  • Motor: 3 HP – 1 Phase
  • Max. cutting width: 12"
  • Max. depth of cut: 3/4"
  • Table size: 12 x 84" long
$9,135
As low as $296.88/mo
View Details
Cantek 12” x 166” Oscillating Edge Sander OES-512D at Elite Metal Tools
Cantek 12” x 166” Oscillating Edge Sander OES-512D
  • Sanding motor: 10 HP
  • Sanding belt size: 12” x 166”
  • Front & Rear Table Size: 10.43” x 60.9”
  • Table: side: 13.8” x 17.7”
$12,075
As low as $392.43/mo
View Details
Cantek Single Phase Standard Automatic Edgebander MX340M at Elite Metal Tools
Cantek Single Phase Standard Automatic Edgebander MX340M
  • Feeding speed: 23 FPM
  • Panel thickness: 0.472~1.77”
  • Edge thickness: 0.0158”~0.118”
  • Power: 5 HP Single Phase
$18,585
As low as $367.79/mo
View Details
Cantek 10 HP 230V Single Blade Rip Saw 303S at Elite Metal Tools
Cantek 10 HP 230V Single Blade Rip Saw 303S
  • Saw blade diameter: 8 – 12″
  • Feed speeds: 3 (50, 65, 85 FPM)
  • Table size: 30″ x 50″
  • Table height: 31-7/8″
$14,910
As low as $484.57/mo
View Details
Cantek 5 HP Single Phase 10’ Sliding Table Saw with Scoring D405M-10 at Elite Metal Tools
Cantek 5 HP Single Phase 10’ Sliding Table Saw with Scoring D405M-10
  • 5 hp three phase main motor with 1 hp scoring motor
  • Max rip cutting width: 51.2”
  • Sliding table dimension: 126″ x 14.9″
  • Blade tilting adjustment: 0°~45°
$13,965
As low as $453.86/mo
View Details
Cantek 230V 3-Sided Linear Brush Sander LBS-300-5S at Elite Metal Tools
Cantek 230V 3-Sided Linear Brush Sander LBS-300-5S
  • Max. working width: 11″
  • Max. working height: 4″
  • Feed speed (Variable): 6.5 ~ 27 FPM
  • Speed of sanding wheel: 200 ~ 1200 RPM            
$18,690
As low as $369.87/mo
View Details
Cantek 2HP Horizontal Boring Machine BM301 at Elite Metal Tools
Cantek 2HP Horizontal Boring Machine BM301
  • Number of drills: 2 spindles
  • Adjustable drill spacing: 0.71”~3.93” centers
  • Maximum drill stroke: 4”
  • Drill bit shank: 7/16”-14 Threaded Shank (Both Right Hand Only)
$6,090
As low as $197.92/mo
View Details
Cantek 25” x 16” Double Surface Planer GT635ARD-16 at Elite Metal Tools
Cantek 25” x 16” Double Surface Planer GT635ARD-16
  • 25″ x 16″ capacity
  • Cast-iron machine body and table for vibration free cutting
  • Top planing head motor: 25 HP
  • Feed speed (variable): 26-80 FPM
$44,310
As low as $876.89/mo
View Details
Cantek 7-Roll Variable Speed Power Feeder for Short Stock Feeding DC70 at Elite Metal Tools
Cantek 7-Roll Variable Speed Power Feeder for Short Stock Feeding DC70
  • Roller Size: Ø60 x 60 mm (Ø2.36″ x 2.36″)
  • Roller: 7
  • Feeding Speed: 2 – 26 M/min (7 – 86 FPM)
  • Horse Power: 2/3 HP
$2,205
As low as $71.66/mo
View Details
Cantek 7.5HP Pneumatic Overarm Pin Router SR750 at Elite Metal Tools
Cantek 7.5HP Pneumatic Overarm Pin Router SR750
  • Chuck to Table Top Maximum: 11″
  • Throat Clearance: 29.5″
  • Spindle Speeds (2 Speeds): 10,000 / 20,000 RPM
  • Spindle Travel: 3.75″
$14,595
As low as $474.33/mo
View Details
Cantek 6” Single End Tenoner ST152C at Elite Metal Tools
Cantek 6” Single End Tenoner ST152C
  • Spindle Diameter: 1.25”
  • Sliding Table Area: 50.4” x 17.7”
  • Maximum Sawblade Diameter: Ø 12”
  • Maximum Tenon Cut Length: 6”
$17,535
As low as $347.01/mo
View Details
Cantek 5 HP Single Phase 8’ Sliding Table Saw with Scoring D405M-8 at Elite Metal Tools
Cantek 5 HP Single Phase 8’ Sliding Table Saw with Scoring D405M-8
  • 5 hp single phase main motor with 1 hp scoring motor
  • Max rip cutting width: 51.2”
  • Sliding table dimension: 102.4″ x 14.9″
  • Blade tilting adjustment: 0°~45°
$13,335
As low as $433.38/mo
View Details
Cantek Standard Single Phase Automatic Edgebander with Pre-milling MX350M at Elite Metal Tools
Cantek Standard Single Phase Automatic Edgebander with Pre-milling MX350M
  • Feeding speed: 23 FPM (7 m/min.)
  • Panel thickness: 0.472~1.77” (12~45 mm)
  • Edge thickness: 0.0158”~0.118”  (0.4 ~ 3 mm)
  • Working table height: 33.7” (856mm)
$24,675
As low as $488.31/mo
View Details
Cantek Construction and Line Boring Machine HS-21T at Elite Metal Tools
Cantek Construction and Line Boring Machine HS-21T
  • Distance Between Center: 32mm
  • Number of Spindles: 21
  • Max. Drilling Depth: 3″(75mm)
  • Table Size: 34.33″ x 19.3″
$10,080
As low as $327.60/mo
View Details
Cantek 20 HP Single Head Economical Horizontal Resaw HR12E at Elite Metal Tools
Cantek 20 HP Single Head Economical Horizontal Resaw HR12E
  • Max. Input Board Size: 11.8” (Wide) x 9.8” (Thick) (300 x 250mm)
  • Conveyor belt size: 11.2” x 215.3” (285 x 5470mm)
  • Diameter of saw wheel: 28” Dia. x 1” Wide
  • Main Motor: 20 HP
$15,225
As low as $301.30/mo
View Details
Cantek 10’ Sliding Table Saw with Programmable Rip Fence D405ANC at Elite Metal Tools
Cantek 10’ Sliding Table Saw with Programmable Rip Fence D405ANC
  • Programmable rip fence with maximum cutting width of 51”
  • Motorized blade rise/fall
  • Motorized blade tilting with electronic angle display on control panel
  • 7.5 HP main motor with 1HP scoring motor
$18,060
As low as $357.40/mo
View Details

First opening in 1991 and since then have become an internationally acclaimed brand and a pioneer of the global market. They are located in Antalya, Turkey. Cantek is a big supplier of solid wood and panel machinery. They have made a big expansion in their company in the past 31 years in the woodworking machinery industry. 

If you are interested in woodworking saws or anything else Cantek has to offer please contact us. Here at Elite Metal Tools we work our hardest to satisfy all questions and have low prices.