U.S. Industrial Machinery

  • Working Pressure: 22 Tons
  • Distance Between Housings: 40.1"
  • Throat Depth: 7.8"
  • Open Height: 9.64"

  • Sheet Size: 98"
  • Shearing Capacity: 1/4" Mild Steel @ 65,000 PSI
  • Throat Depth: 4.7"
  • Main Motor: 15 HP

  • Punch Throat Depth: 16"
  • Angle Shear 45°: 3" x 3" x 1/4"
  • Notcher Thickness: 1/2"
  • Flat Bar Blade: 23.5"

  • Punch Throat Depth: 20"
  • Punch Stroke: 0" to 3-1/8"
  • Flat Bar Shear: 14" x 3/4"
  • Notcher Thickness: 1/2"

  • Squaring Arm
  • Sheet Size: 126"
  • Shearing Capacity: 1/4" Mild Steel @ 65,000 PSI
  • Throat Depth: 4.7"

  • Swing Over Bed: 19.7” (500mm)
  • Swing Over Cross-Slide: 11.8” (300mm)
  • Swing Over Gap: 28” (710mm)
  • Gap Length: 9.44” (240mm)

  • Drilling Capacity: 1.5"
  • Spindle Travel: 9.4"
  • Spindle To Base: 4.72" to 33.85"
  • Morse Taper 4 Spindle

  • Working Pressure: 22 Tons
  • Distance Between Housings: 40.1"
  • Throat Depth: 7.8"
  • Open Height: 9.64"

  • Working Pressure: 44 Tons
  • Throat Depth: 7.8"
  • Length of Working Table: 78.7"
  • Open Height: 12.5"

  • Length of Working Table: 157.4"
  • Distance Between Housings: 124"
  • Throat Depth: 12.5"
  • Rapid Ram Travel Speed: 2.4" / Sec.

  • Capacity: 10‘ x 1/4” Mild Steel @ 65000 PSI
  • Pre-Bend Capacity: 1/4” Mild Steel @ 65000 PSI
  • Roll Diameter: 7.4” On All 3 Rolls
  • Speed: 19 FPM

  • Swing Over Bed: 12.99”
  • Swing Over Cross-Slide: 7.79”
  • Swing Over Gap: 18.74”
  • Maximum Turning Length: 39.37”

  • Electric Stroke Adjustment
  • Sheet Size: 126"
  • Throat Depth: 4.7"
  • Shearing Capacity: 1/2" Mild Steel @ 65,000 PSI

  • Length of Working Table: 125.9"
  • Distance Between Housings: 106.2"
  • Ram Travel: 5.9"
  • Backgauge Travel: 24"

  • Working Pressure: 125 Tons
  • Distance Between Housings: 124"
  • Open Height: 15.9"
  • Backgauge Travel: 24"

  • Working Pressure: 155 Tons
  • Distance Between Housings: 106.2"
  • Open Height: 16.3"
  • Backgauge Travel: 24"

  • Ram Travel: 7.8"
  • Throat Depth: 15.7"
  • Distance Between Housings: 124"
  • Backgauge Travel: 24"

  • Swing Over Bed: 16.53” (420mm)
  • Swing Over Cross-Slide: 8.85” (225mm)
  • Swing Over Gap: 21.65” (550mm)
  • Gap Length: 10.23” (260mm)

  • Working Surface: 10" x 54"
  • Vertical Travel: 16.5"
  • Head Tilt, Left to Right: 90° left, 90° right
  • Quill Travel & Diameter: 5" travel and 3 3/8" diameter

  • Working Surface: 10" x 54"
  • Spindle Range ( Electronic Variable): 60-3750 RPM with frequency changer
  • Vertical Travel: 16.5"
  • T-Slots: 3 @ 2 1/2" centers, 5/8" Ea

  • Punch Throat Depth: 24"
  • Punching Thickness: 1"
  • Bar Shear: 2-3/8" round
  • Flat Bar Shear: 14" x 1"

  • Support Arms Included
  • Sheet Size: 157"
  • Throat Depth: 5.9"
  • Shearing Capacity: 5/8" Mild Steel @ 65,000 PSI

  • Working Pressure: 155 Tons
  • Distance Between Housings: 124"
  • Throat Depth: 12.5"
  • Ram Travel: 5.9"

  • Working Pressure: 125 Tons
  • Length of Working Table: 98.4"
  • Distance Between Housings: 80.7"
  • Throat Depth: 12.5"