Jointers

  • Infeed Table Travel: 3/4"
  • Maximum Depth of Cut: 1/8"
  • Table Dimensions: 16" x 100"
  • Motor: 5HP, 230V (1Ph, 19.5 Amp)
$8,119.00
$7,099.99
  • Maximum Depth of Cut: 1/8"
  • Table Dimensions: 72” L x 8” W
  • Table Height: 31-1/2"
  • Motor: 1Ph 2HP, 230V Only (1Ph, 8 Amp)
$2,515.00
$2,375.00
  • Motor: 2 HP TFEC
  • Cut Capacity: 1/8" 
  • Fence: 39-3/4" x 4-3/4"
  • Cutterhead: Shear-Tec ll
  • Motor: 3 HP, 240V, Single-phase
  • Precision-ground cast-iron table size: 9" x 72-1/2"
  • Cutterhead: Spiral with 40 indexable carbide inserts
  • Cuts per minute: 21,400
  • Motor: 3 HP, 230V, Single-phase
  • Total table size: 8" x 76"
  • Fence size: 4-1/2" x 38"
  • Cuts per minute: 22,000
  • Motor: 5 HP, 220 Volt, 1 Phase, TEFC
  • Max Width: 12″
  • Max Depth: 0.5″
  • Table Dimensions: 12″ x 87¾”
  • Motor: 5HP, 230V, single-phase, 19A, 3450 RPM
  • Fence size: 5-3/8" x 47"
  • Floor to table height: 32-1/8"
  • Maximum depth of cut: 1/8"
  • Working Capacity: 108 1/4" x 20 1/2"
  • No. of Knives: 4
  • Fence Tilt: 0-45°
  • Cutterhead Diameter: 4 3/4"
  • Infeed Table Travel: 3/4"
  • Maximum Depth of Cut: 1/8"
  • Positive Stops: 90° and 45°
  • Motor: 3HP, 230V (1Ph, 14.5 Amp)
$6,973.00
$6,099.99
  • Large 12" x 84" precision ground cast iron table surface for heavy-duty work
  • Parallelogram design for close table-to-cutterhead proximity and fast depth of cut adjustments
  • Rack and pinion adjustable cast iron fence assembly for smooth fence positioning without play
  • Straight knife cutterhead with 3 high speed steel knives create a clean cut
  • Table "lips" on both sides of cutterhead aid in noise reduction
$6,880.00
$5,699.99
  • Infeed Table Travel: 1/2"
  • Maximum Depth of Cut: 1/8"
  • Table Dimensions: 60-3/4” L x 5-3/4” W
  • Motor: 1Ph 1HP, 115V/230V
$1,829.00
$1,699.00
  • Fence Size 43" x 6"
  • Fence Tilt 45°
  • Cutter Head Diameter 3"
  • Max Stock Width 12"
$4,924.29
$4,055.00
  • Cast iron fence bevel controls with positive stops at 45 degrees and 90 degrees
  • Full size rabbeting table supports large workpieces for rabbets up to 3/4" deep
  • Helical cutterhead with 58 two-sided knife inserts reduces noice, eliminates adjustments and speeds knife change
  • Large 16" x 96" precision ground cast iron table surface for maximum support and fine finish
  • Parallelogram construction maintains close table-to-cutterhead proximity and ensures table parallelism
$10,565.71
$8,699.99
  • High-mount switch for operator convenience
  • Large 8" x 82" precision ground cast iron table surface for heavy-duty work
  • Parallelogram design allows for easy and accurate adjustment of tables
  • Parallelogram design for close table-to-cutterhead proximity and fast depth of cut adjustments
  • Patented handwheel with worm gear system for precise fence tilting
$3,931.43
$3,225.99
  • Table Width: 20 1/2"
  • Max. Depth of Cut: 5/16"
  • No. of Knives: 4
  • Fence Tilt: 0-45°
  • Cuts per minute: 20,000
  • Table size: 28-1/2" x 6-1/4"
  • Fence size: 22-1/2" 4-1/4"
  • Motor: 1-1/2 HP, 110V, 12 Amp, 60 Hz
$389.99
  • 66" long adjustable infeed and outfeed tables provide more working surface
  • Enlarged sheet metal stand provides a sturdy base
  • Extra-long 38" two-way tilting fence with positive stops provides quick positioning for 90° or bevel cuts
  • Fence controls are center-mounted for convenience
  • Fine/quick adjustment lever on infeed table for precision cuts
$1,965.71
$1,599.99
  • Motor: 3 HP, 230V, Single-phase
  • Total table size: 8" x 76"
  • Cutterhead speed: 5500 RPM
  • Cuts per minute: 22,000
  • Maximum depth of cut: 5/16"
  • Maximum width of cut: 16"
  • Motor: 5 HP, 220V/440V, 3-phase
  • Cuts per minute: 30,000
  • Front mounted toggle switch with removable safety key
  • Fully Adjustable fence with locking stops at +/- 45 tilt duel direction for beveling
  • Heavy duty Cast Iron Tables
  • Highly visible scale for accurate depth of cut adjustments
  • Includes 4 mounting brackets that secure jointer to benchtop
$1,044.27
$888.00
  • 66" long adjustable infeed and outfeed tables provide more working surface
  • Built-in ledge for 1/2" rabbeting capacity
  • Enlarged sheet metal stand provides a sturdy base
  • Extra-long 38" two-way tilting fence with positive stops provides quick positioning for 90° or bevel cuts
  • Fence controls are center-mounted for convenience
$1,474.29
$1,220.00
  • Adjustment lever offers quick infeed table positioning and fine-tuning of cut depth
  • Extra long tables are mounted on dovetailed ways for extended workpiece support
  • Handwheel operated worm gear system for smooth fence tilting
  • High mount switch for operator convenience
  • Magnetic push blocks can be stored on the machine within constant reach
$3,071.43
$2,499.99
  • Number of Knives: 42
  • Cutterhead RPM: 5500
  • Fence Dimension: 29" X 4"
  • Motor: 1.5 HP 110 volts
  • Adjustment lever offers quick infeed table positioning and fine-tuning of cut depth
  • Extra long tables are mounted on dovetailed ways for extended workpiece support
  • Handwheel operated worm gear system for smooth fence tilting
  • High mount switch for operator convenience
  • Magnetic push blocks can be stored on the machine within constant reach
$2,457.14
$1,999.99