Baker Products

  • Powerful 38-HP Kohler gasoline engine standard
  • Saws logs up to 36 inches in diameter
  • Large 28-inch-diameter band wheels
  • Standard length made for 20’-6” logs
  • 20 HP Honda gasoline engine with electric start
  • Heavy-duty, 2” × 6” steel track
  • Cutting Capacity: 30” diameter maximum
  • Production Rate: Up to 1,000 bf/day
  • 9-HP Honda gasoline engine, standard.
  • Cuts logs up to 28 inches in diameter and up to 8½ feet long with standard 12-ft track.
  • Centrifugal clutch to engage blade.
  • Easy to push through the log.
  • Powered by a 20HP gasoline engine
  • Cutting Capacity: 30’ diameter maximum
  • Four post carriage design
  • Track is made of heavy-duty 2” x 4” tubular steel
  • 50-HP TEFC electric motor
  • Speedy, dual hydraulically-powered chain-driven carriage
  • Saw logs up to 20 1/2 ft. long
  • Cutting Capacity: 36 in
  • Accepts material up to 12" x 12" and uses a 12"-wide conveyor
  • Main Drive Motor: 30 HP TEFC
  • Variable feed speed from 0-95 feet (0-29 m) per minute
  • Versatility: Rip 2-sided slabs; size and resaw 3-sided cants, 4-sided cants, and boards
  • 50 HP Electric Motor
  • Log Length: 20 ft. 6 in capacity
  • 36” diameter log cutting capacity
  • Variable-speed drive
  • 30 HP Electric Motor
  • Log Length: 20 ft. 6 in capacity
  • 36” diameter log cutting capacity
  • Variable-speed drive
  • Comes with Log Infeed Deck
  • Speedy, dual hydraulically-powered chain-driven carriage
  • Saw logs up to 20 1/2 ft. long
  • Cutting Capacity: 36 in
  • Hydraulic Debarker Included
  • Saws logs up to 36 inches in diameter
  • Large 28-inch-diameter band wheels
  • Standard length made for 20’-6” logs
  • Material Capacity: 8 in. x 12 in. (203 mm x 305 mm)
  • Main Drive Motors: Two 20 HP TEFC (11 kw TEFC)
  • Feed Speed: Variable, 0 - 120 fpm
  • Conveyor Width: 6 in.
  • Mini Scragg: 15,000-20,000 board feet per day
  • Slab Edger: 5,000-7,000 board feet per day
  • Main Drive Motors: Two 20-HP (15 kw) TEFC
  • Width Adjustment: 3 1/2" to 12'
  • Cut logs between 4 and 16 feet long
  • Cuts diameters as small as 6 inches
  • Electric Motor: 20 HP (15 kw) on each band blade
  • Remote command center with control console
  • Powered by a 75-hp TEFC electric motor
  • Accepts flitches as large as 36 inches wide by 4 inches thick
  • Board Length: 4 ft. minimum; 24 ft. maximum
  • Edging Cut Width: Fixed width(s). Minimum of ½ inch; maximum of 36 inches
  • 40 HP Electric Motor
  • Log Length: 20 ft. 6 in capacity
  • 36” diameter log cutting capacity
  • Variable-speed drive
  • 30-HP TEFC electric motor standard
  • 6” wide hydraulically-power driven conveyor with roughtop belting
  • 28” diameter, CNC-machined, dynamically-balanced, solid, all-steel band wheels
  • Hydraulic variable feed speed control, powered by main drive motor
  • Material Capacity: 8 in. x 12 in. (203 mm x 305 mm)
  • Main Drive Motors: One 20 HP TEFC (11 kw TEFC)
  • Feed Speed: Variable, 0 - 120 fpm
  • Conveyor Width: 6 in.
  • Max Work Width: 21.7”
  • Head Diameter: 9”
  • Planetary Plate RPM: 0-540 rpm
  • Motor: 220V Single Phase
$10,750.00
$10,445.00
  • Accepts logs from 5” to 16” in diameter, and from 36” to 60” long
  • Proven to produce up to 30,000 bf per day
  • Motors: Three 20 HP (15 kw) TEFC, Hydraulic Power Unit on feedworks
  • Remote electrical pedal mounted control start/stop station
  • Main Drive Motor: 20 HP TEFC
  • 13’-’2” × 1” × 0.035” band blades (standard)
  • 2-sided Feed works
  • 28”-diameter, CNC-machined,dynamically balanced, all-steel bandwheels
  • Proven capable of producing 30,000 to 50,000 bf per day
  • Gives a high yield of up to 75%
  • Accepts scragg blocks 5” to 16” in diameter, and 36” to 96” long
  • High production and low maintenance
  • Main Drive Motor: 20 HP TEFC
  • 28”-diameter, CNC-machined, dynamically-balanced, all-steel band wheels
  • Material Capacity: 6” x 12” (15 cm x 30 cm)
  • Conveyor width: 6” (15 cm)
  • Accepts material up to 16” x 12” and uses a 16” wide conveyor
  • 28” dynamically balanced solid metal band wheels
  • Variable feed speed from 0-95 feet (0-29 m) per minute
  • Main Drive Motor: 40 HP TEFC
  • Accepts material up to 16” × 16”
  • Hydraulically-powered feedworks
  • Main Drive Motor: 40 hp (30 kw)
  • Feed speed: Fully variable 10-60 feet per minute

First opening in 1979 and located in Ellington, MO. Baker Products, which started as a one man show and now is a thriving manufacturing company and is one of the most prestigious woodworking machinery companies. They make products that are easy to use, durable, reliable, and productive. They manufacture woodworking products such as sawmills, scragg mills, board edgers, and cut off saws. Since opening they have turned themselves into one of the industries biggest woodworking machinery companies. 

If you are in need of any woodworking machinery or sawmills please contact us. Elite Metal Tools offers great pricing and we will go out of our way in order to make the customer service one of a kind.