SCM Group

  • Rip Capacity: 51"
  • Main Blade Diameter: 16"
  • Main Blade Arbor: 1"
  • Worktable Height: 34.5"
  • Blade diameter: 13.77 inches (350 mm)
  • Max. cross-cut capacity: 25“ (640 x 20 mm)
  • Precision and smoothness
  • Long lasting functionality
  • Working width: 1.100 mm
  • Sanding belt width: 1.115 mm
  • Sanding belt length: 1.900 mm
  • Main standard motor power: 11 KW
  • Main motor horsepower: 15 HP
  • 12” Easy Touch LCD color touchscreen
  • Fixed table size: 49” x 27”
  • Blade Tilting: -46°/+46°
  • Blade diameter: 350 mm
  • Max. cross-cut capacity: 210mm x 30 mm
  • Exhaust hoods diameter: 80 mm
  • Three-phase motor: 4 HP 60hz
  • Cast-iron saw worktable diam: 1000mm x 685mm
  • Main Blade Three-phase motor: 11 HP 60Hz
  • Blade tilt capacity: -46° ÷ +46°
  • Exhaust outlets diameter: 120mm –80mmecifications
  • 7" Easy Touch 5-Axis Programmer
  • Main Motor Horsepower: 15 HP
  • Fixed Table Size: 49” x 27”
  • Rip Capacity: 59” (1500mm)
  • Motor power for feed system: 1/1.5 HP (.75/1.1 kW)
  • Max. working width (finished section): 180mm (7.086”)
  • Max. working thickness (finished section): 105mm (4.103”)
  • Feed Speed –two speed: 6/12 m/min (19/39 ft/min.)
  • Blade width capacity: 1/16" to 1.0"
  • Maximum cutting height 12"
  • Maximum cutting width: 17.25"
  • Blade length: 146"
  • Main Blade Diameter: 16"
  • 31 amps, 230v / 3 ph
  • Rip Capacity: 59"
  • Sliding Table Width: 14.25"
  • Table Width: 20 1/2"
  • Max. Depth of Cut: 5/16"
  • No. of Knives: 4
  • Fence Tilt: 0-45°
  • Sliding Table Width: 14.25"
  • Main Blade Diameter: 16"
  • Rip Capacity: 51"
  • Main Motor: 12 HP
  • Working Capacity: 108 1/4" x 20 1/2"
  • No. of Knives: 4
  • Fence Tilt: 0-45°
  • Cutterhead Diameter: 4 3/4"
  • Motor Horsepower: 10 HP
  • Table Dimensions: 47.2” x 28.7” (1200mm x 730mm)
  • 1 1/4 Inch interchangeable spindle
  • 5 Spindle speeds from 3,000 to 10,000 rpm
  • Thickness of pre-cut edges in strips 0.4mm – 3mm
  • Edges height 10mm – 84mm
  • Two feed speeds 4m/min – 8m/min
  • Maximum operating temperature 140°C - 220°C
  • Main Blade Diameter: 14"
  • Speed: 4,000 RPM
  • Fixed Table Size: 41" x 25"
  • 230v / 3ph
  • Working width: 950 mm
  • Min/max machining thickness: 4-170 mm
  • Standard main motor power: 5.5 (7.5) kw (HP)
  • Standard feed belt speed: 4,5/9 m/min
  • Working width: 1.100 mm
  • Sanding belt width: 1.115 mm
  • Sanding belt length: 1.900 mm
  • Main standard motor power: 11 KW
  • Motor Horsepower: 11HP
  • Electrical Requirements: 3-Phase @ 230 volts
  • Dust Extraction: 680 CFM x 2
  • Table Dimensions: 1080 x 760mm (42.5” X 29.9”)
  • Worktable dimensions: 300 mm x 500 mm
  • Transversal stroke: 160 mm
  • Vertical stroke: 125 mm
  • Motor power: 3-Phase 2 HP
  • 24" Planer with TERSA Head
  • Working Width: 24 3/4"
  • Max. Depth of Cut: 5/16"
  • Feed Speeds: 13- 65 FPM
  • Working width: 1.350 mm
  • Sanding belt width: 1.370
  • Sand belt length: 2.620 mm
  • Standard main motor power: 15 HP
  • Motor: 4.8 HP 230V Single-phase
  • Table Size: 20.47” x 28.34”
  • Cutting Height/Depth: 19.68”
  • Cutting Width: 20.47”
  • 12" working width w/brush w/32 abrasive
  • Natural Fiber Support 120 grit and brush w/ 32 abrasive
  • Fitted with abrasive insert brushes and inverter-controlled motors for surface sanding
  • Double operating unit allows you to obtain the request finish in a single passage