Planers

  • 1/16" Increment height scale lets you make the most precise adjustments for fine cuts
  • 5" dust port provides efficient chip and dust collection
  • Cast iron infeed and outfeed tables come with the machine
  • Heavy-Duty cast iron and steel construction
  • Heavy-duty cast iron and steel construction for added strength and durability
$4,545.71
$3,699.99
  • Cast iron head
  • Cast iron table with extensions creates a big 55-1/2" x 20" working area
  • Chip breaker and pressure bar assists to reduce snipe
  • Chrome-plated, ergonomic handwheel makes adjustments smooth and easy.
  • Cutterhead contains 4 high speed steel straight knives for a clean, smooth cut
$3,685.71
$2,999.99
  • Motor: 5 HP, 240V, Single-phase
  • Maximum cutting width: 20"
  • Maximum cutting height: 8"
  • Table size: 20" x 25-3/4" (20" x 55-1/2" with extension)
  • Motor: 3 HP, 230V, single-phase, 12A
  • Maximum stock width: 15"
  • Maximum stock thickness: 6"
  • Maximum cutting depth: 1/8"
  • Motor: 5 HP, 220V, single-phase, 28A
  • Maximum cutting width: 20"
  • Maximum stock thickness: 8"
  • Maximum cutting depth: 1/8"
  • 3 speed feed selector allows you to quickly change feed rates
  • 3" diameter infeed and outfeed rollers are supported by four large needle bearings for long life
  • Adjustable table
  • Digital readout and simple PC controller make quick and easy table height set ups
  • Frame machined from heavy cast iron and extra wide side panels with gibs, offers rigid bed support and accurate alignment
$18,428.57
$14,999.99
  • Maximum Stock Width: 20"
  • Maximum Depth of Cut: 1/8"
  • Maximum Stock Thickness: 8"
  • Motor: 5HP 1Ph 230V (1Ph, 18 Amp)
$3,999.99
$3,499.99
  • 5000 Rpm
  • 220V Single Phase
  • 3 Horse Power
  • 4" Dust Collection Port
$2,745.71
$2,261.00
  • Cast iron head
  • Cast iron table with extensions creates a big 55-1/2" x 20" working area
  • Chip breaker and pressure bar assists to reduce snipe
  • Chrome-plated, ergonomic handwheel makes adjustments smooth and easy.
  • Feed rollers and cutterhead supported by full cast iron head assembly
$5,528.57
$4,499.99
  • Motor power for feed system: 1/1.5 HP (.75/1.1 kW)
  • Max. working width (finished section): 180mm (7.086”)
  • Max. working thickness (finished section): 105mm (4.103”)
  • Feed Speed –two speed: 6/12 m/min (19/39 ft/min.)
  • 4" Dust Port hooks up to dust management system and helps keep shop clean
  • Dual infeed speed control for 16fpm or 20fpm, maximizes cut efficiency
  • Dust Port hooks up to dust management system and helps keep shop clean
  • Heavy-duty precision ground cast iron table and four post design provides maximum control and support when passing boards through planer.
  • Helical Cutterhead houses 48 staggered carbide knives that are engineered to align themselves without any adjustment for a superior finish and quieter cut
$3,194.29
$2,599.99
  • Bed Size: 12-1/2 x 10-1/4"
  • Max. Depth of cut: 3/32"
  • Max. Stock Thickness: 6"
  • Max. Stock Width: 12-1/2"
  • 220V Single Phase
  • 5 Horse Power
  • 5" Dust Collection Port
  • 16/20 FPM
$3,938.57
$3,243.00
  • Cutterhead motor: 10 HP, 220V/440V
  • Maximum cutting width: 24"
  • Maximum stock thickness: 9"
  • Number of cuts per minute: 20,000
  • Fence Size 43" x 6"
  • Fence Tilt 45°
  • Cutter Head Diameter 3"
  • Max Stock Width 12"
$4,924.29
$4,055.00
  • Maximum cutting width: 24"
  • Maximum stock thickness: 9"
  • Cutterhead motor: 10 HP, 220V, 3-phase
  • Table size: 24" x 35-1/2"
  • Allows for 4 cutting modes: single two, three and 4-side planing and moulding.
  • Individual powerful motor drive for each spindle.
  • Equipped with 3 depth of cut control plates for bottom cutterhead.
  • Automatic machine stop when top guard is opened.
  • Motor: 3 HP, 230V, Single-phase, 12A
  • Maximum stock width: 15"
  • Maximum stock thickness: 6"
  • Maximum cutting depth: 1/8"
  • 25″ x 16″ capacity
  • Cast-iron machine body and table for vibration free cutting
  • Top planing head motor: 25 HP
  • Feed speed (variable): 26-80 FPM
  • Cutterhead motor: 5 HP, 220V, single-phase
  • Table size: 31-1/8" L x 24-1/8" W
  • Maximum cutting width: 24"
  • Maximum stock thickness: 7"
  • Bed Size: 16 x 21-1/2"
  • Max. Depth of cut: 1/4"
  • Max. Stock Thickness: 8"
  • Max. Stock Width: 16"
  • Maximum Stock Width: 25”
  • Maximum Stock Thickness: 9”
  • Maximum Stock Removal 01-12” Wide: 6 mm/1/4”
  • Cutter-head Speed: 4800 RPM
  • Maximum Stock Width: 25"
  • Maximum Stock Thickness: 9-1/4”
  • BYRD Shelix carbide inserts
  • Motor: 1Ph 10HP, 240V
$15,430.00
$13,499.99