Planers

  • Table size: 20-1/8" x 35-3/8"
  • Maximum cutting width: 20"
  • Maximum cutting height: 9"
  • Cutterhead motor: 7-1/2 HP, 220V/440V

  • Max Stock Width 13'
  • Maximum Stock Height 6"
  • Minimum Stock Thickness 1/8""
  • Minimum Stock Length 7"
$845.00

  • The helical cutterhead with 74 four-sided knife inserts provides smoother, quieter cutting and finer finish than conventional systems
  • Powerful 3HP TEFC motor controlled with a magnetic switch for safety
  • Three V-belts transfer maximum power to the cutterhead
  • Serrated steel infeed roller and smooth steel outfeed roller allow for 1/4" maximum depth of cut and trouble free operation
  • Large cast iron handwheel positions table quickly and easily
$3,931.43
$3,199.99
Save $731!

  • Max Stock Width: 22"
  • Maximum Stock Height: 9"
  • Feed Speed: 2 Speed 20 & 30 fpm
  • Maximum Depth of Cut (Resaw): 1/4"

  • Solid steel helical insert head with four-sided carbide insert tooling, eliminates need for adjustment after changing knives, reduces sound levels
  • Digital readout and simple PC controller make quick and easy table height set ups
  • Segmented serrated infeed roll with segmented chip breakers has 1/4" independent yield, for planing multiple height stock
  • Massive gear box maintains positive feed by using a large chain drive with automatic chain tensioners, to power infeed and outfeed rollers
  • 3" diameter infeed and outfeed rollers are supported by four large needle bearings for long life
$20,271.43
$16,499.99
Save $3771!

  • XYLENT Cutterhead
  • Working Width: 20” (520mm)
  • Working Height: 1/8” – 11.8” (3 – 300mm)
  • Max. Depth of Cut: 5/16" (8mm)

  • The helical cutterhead with four-sided knife inserts provides smoother, quieter cutting and finer finish than conventional systems
  • 5HP motor and 20" planing capacity for heavy duty work
  • Fully enclosed base cabinet with integrated casters for shop mobility
  • Cast iron table with extensions creates a big 55-1/2" x 20" working area
  • Four feed speeds - 24 and 31 FPM, 16 and 20 FPM with gear change - provide versatility
$5,528.57
$4,499.99
Save $1029!

  • 7.5HP, 1Ph
  • 9" Max. Stock Thickness
  • 5/16" Min. Stock Thickness
  • 20-30 FPM
$7,799.00
$6,599.99
Save $1199!

  • The helical cutterhead with four-sided knife inserts provides smoother, quieter cutting and finer finish than conventional systems
  • 5HP motor and 20" planing capacity for heavy duty work
  • Fully enclosed base cabinet with integrated casters for shop mobility
  • Cast iron table with extensions creates a big 55-1/2" x 20" working area
  • Four feed speeds - 24 and 31 FPM, 16 and 20 FPM with gear change - provide versatility
$5,528.57
$4,499.99
Save $1029!

  • Helical cutterhead with indexable carbide inserts for a superior finish and quieter cut
  • Heavy-duty cast iron and steel construction for added strength and durability
  • Two-speed gear box with automatic chain tensioner lets you adjust the feed rate to meet your needs
  • Large, cast iron, precision ground table for precise workpiece support
  • Powerful 5 HP TEFC induction motor with three V-belt transmission for smooth and consistent power
$4,545.71
$3,699.99
Save $846!

  • Cast iron table and base provide strength and reduce vibration during use
  • Four precision-ground column design feature adds stability when raising and lowering the table
  • Three cutter head design produces a superior finish in either application
  • Two speed gear box has feed rates set for optimum planing and molding results
  • Molding cutter head accommodates over 40 standard molding cutter sets; most 2" or smaller heads can be installed without removing the planning knives to save you set-up time
$1,597.14
$1,299.99
Save $297!

  • Maximum cutting width: 24"
  • Maximum stock thickness: 9"
  • Cutterhead motor: 10 HP, 220V, 3-phase
  • Table size: 24" x 35-1/2"

  • Cast iron 1300 lb. construction for solid performance without vibration
  • 2 feed speeds - 20/30 fpm - accommodates rough and fine finish work
  • Segmented infeed roller with sectional chipbreaker allows multiple board planing
  • 4-knife head offers 19,200 cuts per minute and widest capacity in its class
  • Roller bearing-mounted feed rollers for long life
$7,862.86
$6,399.99
Save $1463!

  • Table size: 21-1/4" x 28-1/4"
  • Max. cutting width: 20"
  • Max. stock thickness: 7"
  • Max. cutting depth: 1/8"

  • Cutterhead motor: 7-1/2 HP, 220V/440V, 3-phase
  • Maximum cutting width: 24"
  • Maximum stock thickness: 7"
  • Maximum cutting depth: 1/8"

  • Tersa Cutterhead Planer
  • Working Width: 20” (520mm)
  • Max. Depth of Cut: 5/16" (8mm)
  • Working Height: 1/8” – 11.8” (3 – 300mm)

  • Cutterhead motor: 5 HP, 220V, single-phase, 25A
  • Table size: 21-1/4" x 28-1/4"
  • Max. cutting width: 20"
  • Max. stock thickness: 7"

  • Helical cutterhead with knife inserts provides smoother, quieter cutting and finer finish than conventional systems
  • Cast iron 1300 lb. construction for solid performance without vibration
  • 2 feed speeds - 20/30 fpm - accommodates rough and fine finish work
  • Segmented infeed roller with sectional chipbreaker allows multiple board planing
  • Roller bearing-mounted feed rollers for long life
$10,688.57
$8,699.99
Save $1989!

  • Helical cutterhead with knife inserts provides smoother, quieter cutting and finer finish than conventional systems
  • Cast iron 1300 lb. construction for solid performance without vibration
  • 2 feed speeds - 20/30 fpm - accommodates rough and fine finish work
  • Segmented infeed roller with sectional chipbreaker allows multiple board planing
  • Roller bearing-mounted feed rollers for long life
$10,688.57
$8,699.99
Save $1989!

  • XYLENT Spiral Cutterhead
  • Motor Horsepower: 15 HP
  • Max. Depth of Cut: 5/16” (8mm)
  • Table Size: 25 3/16” x 39.4” (640mm x 1000mm)

  • Table size: 18" x 102"
  • Maximum cutting width: 18"
  • Maximum stock thickness: 8"
  • Maximum cutting depth: 5/16"

  • Cutterhead motor: 10 HP, 220V/440V
  • Maximum cutting width: 24"
  • Maximum stock thickness: 9"
  • Number of cuts per minute: 20,000

  • Cutterhead motor: 5 HP, 220V, single-phase
  • Table size: 31-1/8" L x 24-1/8" W
  • Maximum cutting width: 24"
  • Maximum stock thickness: 7"

  • Cutterhead with EXCLUSIVE Quick change knives that align themselves without any adjustment
  • Heavy-duty cast iron and steel construction for added strength and durability
  • Two-speed gear box with automatic chain tensioner lets you adjust the feed rate to meet your needs
  • Large, cast iron, precision ground table for precise workpiece support
  • Powerful 3 HP TEFC induction motor with three V-belt transmission for smooth and consistent power
$2,580.00
$2,099.99
Save $480!