Welding Equipment

  • 22 ton capacity
  • Perfect for welding, polishing, glue-lining, andassembling
  • Dual drive wheel
  • Dual idler wheels
$21,455.21
$17,669.00
  • Speed 0 – 6 rpm (Variable)
  • Thru Hole OD 2-3/8"
  • Chuck Capacity 1/4" OD/10-3/4" ID
  • Chuck Size Three Jaw 8"
$6,009.50
$4,949.00
  • Speed 0 – 6 rpm (Variable)
  • Thru Hole OD 2-3/8"
  • Chuck Capacity 1/4" OD/10-3/4" ID
  • Chuck Size Three Jaw 8"
$6,908.07
$5,689.00
  • 44 Ton Capacity
  • Perfect for welding, polishing, glue-lining, and assembling
  • 220V, 3PH
  • Self-aligning
$24,393.79
$20,089.00
  • This bundle consists of Weldsale 5 ft x 10 ft Platen and 5 ft x 10 ft Steel Stand. This includes Part Numbers: WSC-510B and WSC-510BNS, respectively.
  • The overall height of Platens and Stand will be 32 inches, from floor to top of Platen. Custom heights are available at higher prices and longer lead times. Leveling pads will increase this height!
  • This bundle consists of Weldsale 5 ft x 8 ft Platen and 5 ft x 8 ft Steel Stand. This includes the Part Numbers: WSC-58B and WSC-58BNS, respectively.
  • The overall height of Platens and Stand will be 32 inches, from floor to top of Platen. Custom heights are available at higher prices and longer lead times. Leveling pads will increase this height!
  • This bundle consists of Weldsale 5 ft x 6 ft Platen and 5 ft x 6 ft Steel Stand. This includes the Part Numbers: WSC-56B and WSC-56BNS, respectively.
  • The overall height of Platens and Stand will be 32 inches, from floor to top of Platen. Custom heights are available at higher prices and longer lead times. Leveling pads will increase this height!
  • This bundle consists of Weldsale 5 ft x 5 ft Platen and 5 ft x 5 ft Steel Stand. This includes the Part Numbers: WSC-55B and WSC-55BNS, respectively.
  • The overall height of Platens and Stand will be 32 inches, from floor to top of Platen. Custom heights are available at higher prices and longer lead times. Leveling pads will increase this height!
  • This bundle consists of Weldsale 4 ft x 4 ft Platen and 4 ft x 4 ft Steel Stand. This includes the Part Numbers: WSC-44B and WSC-44BNS, respectively.
  • The overall height of Platens and Stand will be 32 inches, from floor to top of Platen. Custom heights are available at higher prices and longer lead times. Leveling pads will increase this height!
  • This bundle consists of Weldsale 2.5 ft x 5 ft Platen and 2.5 ft x 5 ft Steel Stand. This bundle includes the Part Numbers: WSC-25B and WSC-25BNS, respectively.
  • The overall height of Platens and Stand will be 32 inches, from floor to top of Platen. Custom heights are available at higher prices and longer lead times. Leveling pads will increase this height!
  • This bundle consists of Weldsale 3 ft x 6 ft Light Duty Platen and 3 ft x 6 ft Light Duty Steel Stand. This bundle includes the part Numbers: WSC-36D and WSC-36DNS, respectively.
  • The overall height of Platens and Stand will be 36 inches, from floor to top of Platen. Custom heights are available at higher prices and longer lead times. Leveling pads will increase this height!
  • This bundle consists of Weldsale 3 ft x 3 ft Light Duty Platen and 3 ft x 3 ft Light Duty Steel Stand. The Part Numbers are: WSC-33D and WSC-33DNS, respectively.
  • The overall height of Platens and Stand will be 36 inches, from floor to top of Platen. Custom heights are available at higher prices and longer lead times. Leveling pads will increase this height!
  • Magnetic holding device with fixed 90 degree Inside Corner. Clamp and align in one step.
  • Can function as “third hand” so Welder can work alone.
$459.78
  • Magnetic holding device with fixed 90 degree Outside Corner. Clamp and align in one step. Can function as a “third hand” so Weldor can work alone.
$453.75
  • Magnetic Square with On/Off Switch. A heavy duty Inside Angle magnet with two independent On/Off Switches to control the magnetic power. Holding force of approximately 50 lbs on each face.
$283.80
  • Magnetic Square with On/Off Switch. A heavy duty Inside Angle ADJUSTABLE magnet with two independent On/Off Switches to control the magnetic power. Holding force of approximately 50 lbs on each face.
$319.77
  • Magnetic holding device that is adjustable from 45 degree to 90 degree. Built in scale. Can function as a “third hand” so Weldor can work alone. Magnet has approximately 100 lbs of holding force. NOT FOR LIFTING!
  • Magnetic holding device with On/Off Switch and V-Groove on top surface. Magnetic force works on all 6 sides. Excellent for holding Pipe, Angle, Tube, and Plate. Precision machined surfaces.
$408.83
  • Overall Tabletop Size: 3' x 4' (36" x 48")
  • Borehole Diameter: Ø 16mm (5/8")
  • Welding Table Material Thickness: Approx. 7/16" to 1/2"
  • Maximum Weight Load: 8,314 lbs. (Based on Even Distribution)
  • Overall Tabletop Size: 4' x 5' (48" x 60")
  • Borehole Diameter: Ø 16mm (5/8")
  • Welding Table Material Thickness: Approx. 7/16" to 1/2"
  • Maximum Weight Load: 8,075 lbs. (Based on Even Distribution)
  • Overall Tabletop Size: 4' x 8' (48" x 96")
  • Borehole Diameter: Ø 16mm (5/8")
  • Welding Table Material Thickness: Approx. 7/16" to 1/2"
  • Maximum Weight Load: 12,050 lbs. (Based on Even Distribution)
  • Overall Tabletop Size: 5' x 10' (60" x 120")
  • Borehole Diameter: Ø 16mm (5/8")
  • Welding Table Material Thickness: Approx. 7/16" to 1/2"
  • Maximum Weight Load: 11,475 lbs. (Based on Even Distribution)
  • Overall Tabletop Size: 4' x 5' (48" x 60")
  • Borehole Diameter: Ø 28mm (1-1/10")
  • Welding Table Material Thickness: Approx. 15/16" to 1-1/16"
  • Maximum Weight Load: 16,150 lbs. (Based on Even Distribution)
  • Overall Tabletop Size: 4' x 8' (48" x 96")
  • Borehole Diameter: Ø 28mm (1-1/10")
  • Welding Table Material Thickness: Approx. 15/16" to 1-1/16"
  • Maximum Weight Load: 24,210 lbs. (Based on Even Distribution)