Palmgren

  • Motor: 1HP - 115V - 1PH - 60Hz
  • Swing Over Bed: 10"
  • Distance Between Centers: 21-5/8"
  • Number of Spindle Speeds: 6
MSRP: $3,067
$2,875.31
As low as $93.44/mo
  • Motor: 1 HP / 115 V / 60HZ / 1PH
  • Center Height: 5.51 in
  • Max Turning Diameter: 11.02 in
  • Distance Between Centers: 27.56 in
MSRP: $5,067
$4,750.31
As low as $154.38/mo
  • Motor: 2HP - 115/230V - 1PH - 60Hz
  • Distance Between Centers: 36"
  • Spindle Bore: 1-1/2"
  • Number of Spindle Speeds: 18
MSRP: $11,333
$10,624.69
As low as $345.30/mo
  • Lathe Motor: 1PH - 115V - 13.6 Amps - 1PH - 60 Hz
  • Height of Centers: 4-3/4"
  • Max Turning Diameter: 9-7/8"
  • Distance Between Centers: 20"
MSRP: $4,667
$4,375.31
As low as $142.19/mo
  • Motor: 1HP - 120/240V - 1PH - 60Hz
  • Speeds: 86-132-178-260 fpm
  • Max. Thickness of Cut: 7"
  • RPM: 1725
$2,050
As low as $66.62/mo
  • Motor: ¾ HP Single Phase
  • RPM: 3600
  • Table Size: 6" x 12"
  • Wheel Size (Dia x W x Bore): 7" x 1/2" x 1-1/4"
$6,250
As low as $203.12/mo
  • Motor: 1 HP / 115 V / 60HZ / 1PH
  • Center Height: 4.92 in
  • Distance Between Centers: 21.65 in
  • Turning Diameter: 9.84 in
MSRP: $2,933
$2,749.69
As low as $89.36/mo
  • Motor: 7/8HP - 115V - 1PH - 60Hz
  • Distance Between Centers: 12"
  • Spindle Bore: 3/4"
  • Bed Width: 3-15/16"
MSRP: $2,133
$1,999.69
As low as $64.98/mo
  • Motor: 6HP - 230V - 3PH - 60Hz
  • Distance Between Centers: 60"
  • Number of Spindle Speeds: 16
  • Compound Travel: 5-1/2"
MSRP: $26,667
$25,000.31
As low as $494.75/mo
  • Max Load Horizontal: 310 lbs.
  • Max Load Vertical: 133 lbs.
  • Gear Ratio: 90 to 1 in
  • Center Hole: MT-4
MSRP: $3,745
$3,042.81
As low as $98.89/mo
  • Motor: 1.20HP / 115V / 1PH
  • Drilling Capacity max.: Ø 16 mm / 5/8 in
  • Gear Stages: 2 stages, continuously variable
  • Head Travel: 280 mm / 11.024 in
MSRP: $2,933
$2,749.69
As low as $89.36/mo
  • Jaw Width           6 in
  • Jaw Opening      8- 3/4 in
  • Throat Depth     1- 3/4 in
  • Equipped with Dual Force anti-lift mechanism
MSRP: $2,083
$1,562.25
As low as $50.77/mo
  • Speed RPM: 1680 - 9120
  • Self-trimming cup wheel
  • Prismatic vise for centering and safe fixturing
  • Depth of the Cup Wheel: 22mm /.866"
MSRP: $1,629
$1,585
As low as $51.51/mo
  • Spindle Taper: MT 6
  • Number of Spindle Speeds: 8
  • Spindle Speed: 70 - 2000 RPM
  • Spindle Seat: Camlock D1-5
MSRP: $11,867
$11,125.31
As low as $361.57/mo
  • Extra wide speed range
  • Miter Capacity: 90°
  • Throat Depth: 18”
  • Motor: 1-1/2 HP 115/230V Single Phase
MSRP: $3,333
$3,124.69
As low as $101.55/mo
  • Spindle Taper: MT 5
  • Number of Spindle Speeds: 8 or 16
  • Spindle Speed: 70 - 2000 RPM
  • Spindle Seat: Camlock D1-4
MSRP: $17,333
$16,249.69
As low as $321.58/mo
  • Capacity Cast Iron: 9/16 in
  • RPM: 120-3605
  • Spindle Taper: MT3
  • Spindle Travel: 5 in
$1,975
As low as $64.18/mo
  • Parallel arm with 8" to 55" reach
  • Torque @ 90 PSI: 30 ft/lb.
  • Max Tap Capacity/Mold Steel: 5/8
  • Max Tap Capacity/Aluminum: 3/4
MSRP: $2,933
$2,749.69
As low as $89.36/mo
  • Swing Over Bed: 22"
  • Distance Between Centers: 80"
  • Spindle Taper: MT7
  • Spindle Bore: 4-1/8"
MSRP: $38,667
$36,250.31
As low as $717.39/mo
  • Swing: 13-1/2"
  • Motor: 5/8HP - 240V -1PH - 10Amp - 60Hz
  • Table Work Surface: 15-3/4" x 4-3/4"
  • Spindle to Table: 8-1/4"
MSRP: $2,347
$2,200.31
As low as $71.51/mo
  • Capacity Steel: 1"
  • Capacity Cast Iron: 1-1/8"
  • Power Feed: No
  • Number Of Speeds: 8
$7,250
As low as $235.62/mo
  • Extra wide speed range
  • Miter Capacity: 90°
  • Throat Depth: 15”
  • Motor: 1 HP 115/230V Single Phase
MSRP: $2,667
$2,500.31
As low as $81.26/mo
  • Motor RPM: 400
  • Torque @ 90 PSI: 27 ft/lb
  • Max Tap Capacity/Mold Steel: 1/2
  • Max Tap Capacity/Aluminum: 9/16
MSRP: $2,533
$2,374.69
As low as $77.17/mo
  • Torque @ 90 PSI: 27 ft/lb
  • Air Consumption: 24 CFM
  • Max Tap Capacity/Mold Steel: 1/2
  • Max Tap Capacity/Aluminum: 9/16
MSRP: $2,133
$1,999.69
As low as $64.98/mo

Founded in 1919 and since then have been creating superior quality machines for their customers. Palmgren is located in Naperville, IL. They use innovative designs and patents to improve their metalworking machines. Some of the many machines that they sell include belt grinders, drill sharpeners, and finishing machines. 

If you are interested in belt grinders or anything else Palmgren has to offer, please contact us. Here at Elite Metal Tools we work as a team to provide our customers with the best customer service and low prices.