| Manufacturer Part: | EMT ID: |
|
9684520
|
12627
|
- Motor: 1 HP / 115 V / 60HZ / 1PH
- Center Height: 5.51 in
- Max Turning Diameter: 11.02 in
- Distance Between Centers: 27.56 in
Description
Palmgren’s combination 11˝ bench engine lathe and gear head mill delivers the precision, power and versatility to handle a wide range of turning, milling and drilling operations normally found in much larger machines.
Heavy cast iron construction, smooth power transmission with precision thrust and ball bearings in the head stock and spindles, hardened and ground ways all designed to go give you years of trouble-free, precise turning, milling and hole making machining. Built and inspected to the DIN 8606 toolmakers precision lathe standard assuring accuracy and consistent performance.
The all gear drive transmission on the mill delivers full power at any speed driving the cutting tools at nearly 100% of available horsepower and torque. With such a wide range of versatility and features, this all-purpose combination lathe/mill is one of the most function manual machine centers that can operate in all types and sizes of shops.
Specifications
- Motor: 1 HP / 115 V / 60HZ / 1PH
- Center Height: 5.51 in
- Max Turning Diameter: 11.02 in
- Distance Between Centers: 27.56 in
Spindle
- Spindle Speed: 150 - 2000 RPM
- Number of Steps: 6
- Spindle Taper: MT4
- Spindle Hole: 1.02 in
- Chuck Size: 5 in
Slide
- Bed Width: 7.09 in
- Top Slide Travel: 2.43 in
- Compound Slide Travel: 5.60 in
- Distance Between Center and Compound Table: 3.49 in
Tailstock
- Tailstock Taper: MT2
- Tailstock Sleeve Travel: 4.13 in
- Longitudinal Feed: .002-.004-.008 in
- Pitch: 8 - 56 in
Dimensions / Weight
- Height: 24.80 in
- Length: 54.72 in
- Width :27.56 in
- 4 Position Tool Post Height: 1/2 in.
- Weight: 440.93 lb
Mill Specifications
- Motor :1 HP / 115 V / 60HZ / 1PH
- Drilling Capacity: 0.63 in
- Milling Capacity of End-Mill Cutter: 0.79 in
- Milling Capacity of Inserted Tooth Cutter: 2.48 in
- Working Radius: 7.28 in
Spindle
- Spindle Holding Fixture: MT2/M10
- Spindle Travel: 1.97 in
Drill - Mill Head
- Swivelling: +/- 90°
- Gear Stages: 2
- Low Range: 100 to 1500 RPM
- High Range: 200 to 3000 RPM
- Z-Axis Travel: 14.57 in
Cross Table
- Table Length: 19.69 in
- Table Width: 7.09 in
- Y-Axis Travel: 6.89 in
- X-Axis Travel: 11.02 in
- T-Slot Size / Distance / Quantity: 0.47 in / 2.48 in / 3
| Manufacturer | |
| SKU |
9684520
|
| UPC |
726896845203
|
| Shipping Method |
LTL Freight
|
| Weight |
440 lb
|
| Dimensions |
60 × 35 × 30 in
|
| Warranty |
3 Years
|
