Duct Forming Equipment

  • Motor: 5HP 220V Three Phase
  • Line Speed: 50 FPM
  • Gauge Capacity: 20-26 Ga
  • 24” Full Hardened Tool Steel Guides
$31,340
As low as $620.21/mo
  • Motor: 1HP 115V Single Phase
  • 60” Mild Steel x 16 Gauge Capacity
  • Adjustable depth beads on 12” centers
  • Line Speed: 48 FPM
$10,395
As low as $337.83/mo
  • Capacity: 20 Ga. Mild Steel 60” Wide
  • Formed V Beads: 5
  • Center: 12”
  • Approximate Speed: 30 FPM
$7,595
As low as $246.83/mo
  • Motor: 5HP 220V Three Phase
  • Line Speed: 24 FPM
  • Gauge Capacity: 22-26 Ga
  • Passline Height: 35”
$52,195
As low as $1,032.93/mo
  • Gauge Range: 18-26 Ga
  • Motor: 7.5HP 220V Three Phase
  • Line Speed: 75 FPM
  • Passline Height: 34”
$31,500
As low as $623.38/mo
  • Motor: 1/4HP, 115 Volt single phase
  • Capacity: 18 Ga. Mild Steel 60” Wide
  • Approximate Speed: 30 FPM
  • Adjustable Top Roller
$8,995
As low as $292.33/mo
  • Motor: 10HP 230V Three Phase
  • Line Speed: 60 FPM
  • Gauge Capacity: 18-26 Ga
  • Passline Height: 36”
$96,500
As low as $1,909.73/mo
  • Motor: 220V Three Phase
  • Max Width: 60”
  • TDFC Width: 44”-56”-68”
  • Slip and Drive Width: 48”-60”-72”
$156,795
As low as $3,102.97/mo
  • Motor: 5HP 240V Three Phase
  • Speed: 60 FPM
  • Passline Height: 34”
  • Gauge Capacity w/additional tooling: 16-28
$12,795
As low as $415.83/mo
  • Motor: 110V Single Phase
  • Throat Depth: 14”
  • Punching Range: 28-14 Ga
  • Laser Light Locator Included  
$17,180
As low as $339.99/mo
  • Motor: 110V Single Phase
  • Throat Depth: 30”
  • Punching Range: 28-14 Ga
  • Laser Light Locator Included  
$24,380
As low as $482.48/mo
  • Motor: 240V Three Phase
  • Max Weight Capacity: 15,000 lbs
  • Max Coil Width: 60”
  • Expansion Range: 18”-21”
$32,295
As low as $639.11/mo
  • Motor: 110V Single Phase
  • Throat Depth: 26”
  • Punching Range: 28-14 Ga
  • Laser Light Locator Included  
$20,840
As low as $412.42/mo
  • Motor: 220V Three Phase
  • Max Width: 72”
  • TDFC Width: 44”-56”-68”
  • Slip and Drive Width: 48”-60”-72”
$162,295
As low as $3,211.81/mo
  • 110V Single Phase
  • Air Requirements: 5 cfm @ 80 psi
  • Capacity: 60” – 16 Gauge
  • Single Operator with Simple, Convenient Installation
$24,995
As low as $494.65/mo
  • Motor: 440V Three Phase
  • Air Requirements: PSI 120 CFM 3
  • Process 48” – 60” coil widths
  • ½” -2” liner, TDC Slip and Drive and Raw edge
MSRP: $139,500
$131,595
As low as $2,604.26/mo
  • Motor: 110V Single Phase
  • Gauge Capacity: 26-18 Ga
  • Material Width Capacity: 72”
  • All Gear Drive
$170,395
As low as $3,372.11/mo
  • Motor: 110V Single Phase
  • Gauge Capacity: 26-18 Ga
  • Material Width Capacity: 60”
  • All Gear Drive
$161,495
As low as $3,195.98/mo
  • Gauge Range: 18-26 Ga
  • Motor: 7.5HP 220V Three Phase
  • Line Speed: 75 FPM
  • Passline Height: 34”
$32,500
As low as $643.17/mo
  • Motor: 220V Three Phase
  • Air Requirements: PSI 120 CFM 3
  • Process 48” – 60” coil widths
  • ½” -2” liner, TDC Slip and Drive and Raw edge
MSRP: $139,500
$131,595
As low as $2,604.26/mo
  • Motor: 480V Three Phase
  • Max Weight Capacity: 15,000 lbs
  • Max Coil Width: 60”
  • Expansion Range: 18”-21”
$32,295
As low as $639.11/mo
  • Motor: 440V Three Phase
  • Max Width: 60”
  • TDFC Width: 44”-56”-68”
  • Slip and Drive Width: 48”-60”-72”
$156,795
As low as $3,102.97/mo
  • Motor: 5HP 440V Three Phase
  • Line Speed: 50 FPM
  • Gauge Capacity: 20-26 Ga
  • 24” Full Hardened Tool Steel Guides
$31,340
As low as $620.21/mo
  • Motor: 440V Three Phase
  • Max Width: 72”
  • TDFC Width: 44”-56”-68”
  • Slip and Drive Width: 48”-60”-72”
$162,295
As low as $3,211.81/mo