Ductformer 220V Three Phase 72” Variable Speed Line-A-Duct Insulator DL-72
| Manufacturer Part: | EMT ID: |
|
DL-72 (220V)
|
16860
|
- Motor: 220V Three Phase
- Air Requirements: PSI 120 CFM 3
- Process 48” – 72” coil widths
- ½” -2” liner, TDC Slip and Drive and Raw edge
Description
Ductformer’s Line-A-Duct DL-72 is designed to be installed in any manufacturer’s Duct Coil Line System or used as a Free-Standing Unit. As the sheet exits the Coil Line TDFC it will be conveyed directly into the Glue Extrusion System. The sheet will then pass through the Insulation Feed and Cutoff. The roll of insulation will be paid off and positioned onto the duct section and cut-to-length. It will then pass under a Pressure Roller to assist in adhering the insulation to the glued duct section. The insulated sheet will then pass through the Weld Pin System where the Multi-Head Pin Spotter will weld insulation pins after the liner is applied. The system will feature a Variable Speed Drive which controls the Conveyor speeds during the pin spot operation.
Features
- Glue Extrusion System eliminates overspray and minimizes maintenance
- TDC Slip and Drive and Raw edge
- 2 Insulation Rolls mounting
- Cuts insulation material to length
- Variable Speed Drives allow operator to fine tune
- Common readily available and affordable “off the shelf parts” such as Shear Blade and Pneumatic Cylinders
- Installs easily in any manufacturers Coil Line, perfect for add on or replacement of older systems
- Plug into standard power and air (no special electrical shop rewiring costs compared to Press Brake setup)
Specifications
- Material Range: ½” – 2” Liner
- Material Width: 48” – 72”
- Air Requirements: PSI 120 CFM 3
- Working Height: 40”
Options
- 50 or 60 Hz
- 110V option available
- Pin Spotter Welder as additional add-on
| Manufacturer | |
| SKU |
DL-72 (220V)
|
| Shipping Method |
Flatbed
|
| Weight |
5,100 lb
|
| Dimensions |
72 × 155 × 50 in
|
| Country of Origin |
United States of America
|
