Ductformer 110V Single Phase 72” Compact Cut to Length Coil Line System CR7218

Description

The compact design and heavy duty construction makes this Ductformer’s most popular HVAC Duct Coil Line Systems. The Programmable Feed handles materials 28 to 18 gauge, 72” wide. They have a wide range of Drives, Controls, and applications. This assures you will get the dependability and accuracy you expect from a quality system.

The Model CR7218 is a highly popular Duct Coil Line systems to bead, notch, and shear ductwork for HVAC applications from 72” wide coils of 18 gauge. The quality compact design and heavy duty construction of the Ductformer Cut to Length System assures you will get years of dependable service and accuracy unsurpassed on any HVAC Coil Line to date. All Feed Controls use the latest State of the Art Technology in Programmable Microprocessors & Feed Control Drives. In general, this system eliminates all the mechanical shifting, clutches, brakes, etc found in other systems.

Straighteners

All of Ductformer’s Straighteners have one (1) set of Pinch Rolls, five (5) Straightener Rolls, and a Pinch Bead Roll. Hence, the same Straightener can be configured for either an overfeed or underfeed payoff application. The Straightener features an All Gear Drive (no chain). It also has Heavy Duty Spindles running off heavy duty Anti-Friction Roller Bearing.

The Pinch Rolls are gear driven top to bottom with Pneumatic Clamping. The Pneumatic Clamping allows you to disengage the Pinch Rolls to re-align the strip when feeing in a new coil. It also eliminates tracking problems for backing the strip out of the Straightener. The upper Straightener Rolls are adjustable from a Handwheel setting with a Micrometer readout for the various materials to run. The Straightener Toll settings are also a Direct Gear Drive eliminating the problem associated with other Roller Chain and Sprocket applications. The Bead Rolls are larger than most systems which would eliminate the Center Bead Washout found on other systems.

Dies

Ductformer’s Vee Notch and End Notch Dies are designed for both TDFC and “S” and Drive Cleat applications. The Hydraulic Press Die Units are quality Die Post and Pin construction. For this reason, they are designed for years of service and ease of maintenance. All Die Tooling is made of quality high chrome tool steel. The positioning of the Die is through Lead Screws and Handwheels and Micrometer Read Outs. The Hydraulic Shear is a Gib Style Cutoff with a heavy duty all steel construction. Shear Blades are interchangeable with four (4) cutting edges per blade.

Features

• 1 Pinch Rolls
• 5 Straightener Rolls
• 1 Pinch Bead Roll
• Die Post and Pin Constructed Die Units
• Gib Style Cutoff Hydraulic Shear
• All Gear Drive

Specifications

• Gauge Capacity: 26-18 Ga
• Material Width Capacity: 72”
• Dimensions: 84”L x 48”W x 60”H
• Weight: 3,000 lbs

Options

• 26 – 12 Gauge Capacity Available
• Dies Units Sold Separately