Duct Forming Equipment

  • Motor: 220V Three Phase
  • Air Requirements: PSI 120 CFM 3
  • Process 48” – 72” coil widths
  • ½” -2” liner, TDC Slip and Drive and Raw edge
MSRP: $149,500
$145,495
As low as $2,879.34/mo

  • Motor: 5HP 480V Three Phase
  • Speed: 60 FPM
  • Passline Height: 34”
  • Gauge Capacity w/additional tooling: 16-28
$12,795
As low as $415.83/mo

  • Motor: 240V Three Phase
  • Max Coil Weight: 15,000 lbs
  • Gauge Range: 30-14 Ga
  • Max Coil Width: 60”
$21,995
As low as $435.28/mo

  • Motor: 5HP 220V Three Phase
  • Line Speed: 50 FPM
  • Gauge Capacity: 18-26 Ga
  • Passline Height: 34”
$34,400
As low as $680.77/mo

  • Gauge Range: 18-26 Ga
  • Motor: 7.5HP 440V Three Phase
  • Line Speed: 75 FPM
  • Passline Height: 34”
$32,500
As low as $643.17/mo

  • Motor: 240V Three Phase
  • Max Coil Weight: 20,000 lbs
  • Gauge Range: 30-14 Ga
  • Max Coil Width: 60”
$22,695
As low as $449.13/mo

  • Motor: 5HP 220V Three Phase
  • Line Speed: 50-75 FPM available
  • Gauge Capacity: 18-26 Ga
  • Passline Height: 36”
MSRP: $67,540
$65,095
As low as $1,288.23/mo

  • Gauge Range: 18-26 Ga
  • Motor: 7.5HP 440V Three Phase
  • Line Speed: 75 FPM
  • Passline Height: 34”
$31,500
As low as $623.38/mo

  • Motor: 10HP 460V Three Phase
  • Line Speed: 60 FPM
  • Gauge Capacity: 18-26 Ga
  • Passline Height: 36”
$98,500
As low as $1,949.31/mo

  • Motor: 10HP 230V Three Phase
  • Line Speed: 60 FPM
  • Gauge Capacity: 18-26 Ga
  • Passline Height: 36”
$98,500
As low as $1,949.31/mo

  • Motor: 5HP 440V Three Phase
  • Line Speed: 24 FPM
  • Gauge Capacity: 22-26 Ga
  • Passline Height: 35”
$52,195
As low as $1,032.93/mo

  • Motor: 440V Three Phase
  • Air Requirements: PSI 120 CFM 3
  • Process 48” – 72” coil widths
  • ½” -2” liner, TDC Slip and Drive and Raw edge
MSRP: $149,500
$145,495
As low as $2,879.34/mo

  • Motor: 10HP 460V Three Phase
  • Line Speed: 60 FPM
  • Gauge Capacity: 18-26 Ga
  • Passline Height: 36”
$96,500
As low as $1,909.73/mo

  • Motor: 480V Three Phase
  • Max Coil Weight: 15,000 lbs
  • Gauge Range: 30-14 Ga
  • Max Coil Width: 60”
$21,995
As low as $435.28/mo

  • Motor: 5HP 440V Three Phase
  • Line Speed: 50-75 FPM available
  • Gauge Capacity: 18-26 Ga
  • Passline Height: 36”
MSRP: $67,540
$65,095
As low as $1,288.23/mo

  • Motor: 480V Three Phase
  • Max Coil Weight: 20,000 lbs
  • Gauge Range: 30-14 Ga
  • Max Coil Width: 60”
$22,695
As low as $449.13/mo

  • Motor: 5HP 440V Three Phase
  • Line Speed: 50 FPM
  • Gauge Capacity: 18-26 Ga
  • Passline Height: 34”
$34,400
As low as $680.77/mo

  • Capacity, Mild Steel/Galvanized: 50” x 18Ga
  • Min Thickness: 26”
  • ½” width of die groove for locking ½” seam
  • Main motor: 220V Single Phase 1HP 
$5,150
As low as $167.37/mo

NEW
GMC Machinery 220V Three Phase 48” 13,200 lbs Capacity Hydraulic Decoiler HDC-4820-6T at Elite Metal Tools
  • Coil ID: 20”, hydraulic clamping range from 18½” to 20¾”
  • Max Coil OD: 47”
  • Speed: 0-100 fpm
  • Hydraulic System Pressure: 0-15 MPA
$57,850
As low as $1,144.85/mo