Manufacturer Part: | EMT ID: |
CR8-CFDH (440V)
|
16745
|
- Motor: 5HP 440V Three Phase
- Line Speed: 50-75 FPM available
- Gauge Capacity: 18-26 Ga
- Passline Height: 36”
Description
In brief, Ductformer’s Model CR8-CFDH Dual Head Cleat Former forms the Drive Cleat Flange on both ends of the Duct in a single pass-through operation. The System overall can be incorporated into any existing Duct Fabrication System to product 4’ and 5’ L-Shape or Full Wrapper Duct.
Designed as a conventional rollformer all forming stations are gear driven. Roll tooling is designed by the same roll tool engineers that have been designing custom tooling for decades. The Drive Cleat hem formed on the CR-8 is more consistent and uniform then competitors’ models because we have designed this machine as a true rollformer with expert designed tooling and each forming station gear driven. Our width adjustment system is also the finest in the industry with solid shaft gear box coupling where our competition only uses chains and sprockets.
The rollformers’ System features an all gear drive, direct oil bath gear reduction, and sealed (lube for life) bearings to provide the smoothest, quietest rollformer on the market to date. The unit consists of two Rollform Head Assemblies mounted parallel side-by-side and positioned from Handwheel Leadscrews. The Roll Tooling will form the 180° Drive Cleat hems on both edges of the pre-notched sheet metal. Hence while the pre-cut Duct passes through the Cleat Edge Former, the system senses the notch to form the Cleat Edges for L-shape and Full Wrapper Duct.
For systems using combination TDFC and ‘S’ Slip and Drive Cleat operations, the rollformer features By-Pass Conveyors. The Form Rolls open wider and the part ban be by-passed or transferred through the By-Pass Conveyor then to the next form sequence.
Features
- Inline System for Drive Cleat Edge forming
- 8 Stations
- Aur Actuated
- Forms 180° Drive Cleat Hems on Pre-Notched Material for L-Shape and Full Wrapper Duct
- Designed for left or right hand systems
- Digital head position indicators, solid shaft coupled
Specifications
- Gauge Capacity: 18-26 Ga
- Line Speed: 50-75 FPM available
- 4’ to 5’, 6’ coil widths available
- Dimensions: 68”L x 114”W x 48”H
- Passline Height: 36”
- Weight: 3,100 lbs
Manufacturer | |
SKU |
CR8-CFDH (440V)
|
Shipping Method |
Flatbed
|
Weight |
3,100 lb
|
Dimensions |
68 × 114 × 48 in
|
Country of Origin |
United States of America
|