Cantek

  • 5 HP three phase main motor with 1 HP scoring motor
  • 51″ rip capacity
  • Sliding table dimensions: 10 ft. x 14”
  • Blade tilt: 0 – 45°
$10,710
As low as $348.07/mo

  • Maximum Cutting Width: 11.8” (300mm)
  • Saw Motor HP: 50 HP – Voltage 230/3/60
  • Feed Speeds: 25 – 100 FPM (7.5~30 m/min)
  • Table Size: 60″ x 30” (1530x760mm)
$39,060
As low as $772.99/mo

  • Abrasive belt size: 37” x 60”
  • Main motor (First head): 20HP 
  • Max thickness opening: 5”
  • Feed speed (variable): 13 to 52 FPM 
$30,450
As low as $602.60/mo

  • Table Size: 31.5” x 39.4″
  • Spindle Speeds (5): 3000/4000/6000/8000/10000 RPM
  • Spindle Taper: 5 MT
  • Spindle Diameter: 1.25”
$10,080
As low as $327.60/mo

  • Cutting Capacity (Thickness x Width): 2″ x 12″, 3″ x 11″, 4″ x 10″
  • Cycle Speed: 45 strokes/min
  • Cycle Operation: Air
  • Saw Blade Size (Optional): 18″
$7,980
As low as $259.35/mo

  • 25″ x 20″ capacity
  • Cast-iron machine body and table for vibration free cutting
  • Top planing head motor: 25 HP
  • Feed speed (variable): 26-80 FPM
$51,555
As low as $1,020.27/mo

  • Abrasive Belt Size: 25” x 60”
  • Working Width: 25″
  • Minimum Part Length: 13″
  • Minimum Thickness Opening: 5″
$14,490
As low as $470.92/mo

  • 1st Main Motor: 20 HP
  • Working Width: 36″
  • Minimum Part Length: 16.9″
  • Maximum Thickness Opening: 4.7″
$45,465
As low as $899.75/mo

  • Table size: 45-1/4″ x 31-1/2″
  • Throat capacity: 30-5/8″
  • Height capacity: 15-3/8″
  • Comes with a feeder
$17,955
As low as $355.32/mo

  • Table size: 36″x27″
  • Max. rip to right of blade: 50″
  • Max. depth of cut at 90°: 3″
  • Max. depth of cut at 45°: 2″
$3,045
As low as $98.96/mo

  • Sliding table dimension: 63” x 12.4”
  • 5 HP Three Phase main motor with ¾ HP scoring motor
  • Cutting width – ripping: 51” max
  • 0-45° Manual Tilting adjustment for main saw blade
$9,345
As low as $303.71/mo

  • Panel thickness: 0.315” - 1.77”
  • Min panel length: 6.7”
  • Working table height: 33.5”
  • Dust collection outlet: Ø 5” x 2 = 1200 CFM 
$24,465
As low as $484.16/mo

  • Abrasive belt size: 36” x 75” 
  • Min part length: 16.9”
  • Max thickness opening: 4.7”
  • Feed speed (variable): 31 to 59 FPM 
$49,560
As low as $980.79/mo

  • Feed speeds variable: 50 to 120 FPM
  • Maximum workpiece thickness: 3.35″
  • Minimum workpiece length: 8″
  • Table size: 39″ x 57″
$21,420
As low as $423.90/mo

  • Feeding speed: 23 FPM
  • Panel thickness: 0.472~1.77”
  • Edge thickness: 0.0158”~0.118”
  • Power: 5 HP Three Phase
$18,585
As low as $367.79/mo

  • Table size: 36″x27″
  • Max. rip to right of blade: 50″
  • Max. depth of cut at 90°: 3″
  • Max. depth of cut at 45°: 2″
$3,045
As low as $98.96/mo

  • Sanding motor: 7.5 HP
  • Sanding belt size: 9” x 165”
  • Front & Rear Table Size: 10.43” x 60.9”
  • Table: side: 13.8” x 17.7”
$10,500
As low as $341.25/mo

  • Cutting Capacity (Thickness x Width): 2″ x 12″, 3″ x 11″, 4″ x 10″
  • Cycle Speed: 45 strokes/min
  • Cycle Operation: Air
  • Saw Blade Size (Optional): 18″
$10,185
As low as $331.01/mo

  • Minimum Length: 6″
  • Maximum Sawblade Diameter: 18″
  • Sawblade Included with Machine: 14″
  • Sawblade Bore: 2″
$31,185
As low as $617.15/mo

  • Saw wheel diameter: 24″
  • Motor: 3 HP
  • Table Size: 31 ½" x 23 7/8"
  • Throat Capacity: 22 7/8"
$5,795
As low as $188.33/mo

  • Feeding speed: 23 FPM (7 m/min.)
  • Panel thickness: 0.472~1.77” (12~45 mm)
  • Edge thickness: 0.0158”~0.118”  (0.4 ~ 3 mm)
  • Working table height: 33.7” (856mm)
$24,675
As low as $488.31/mo

  • Saw Motor: 60 HP 460 volt
  • Feed Speeds: 25 – 100 FPM
  • Table Size: 30” x 60″
  • Table Height from floor: 33.5″
$46,830
As low as $926.76/mo

  • Table Size: 31.5” x 39.4″
  • Tilting Spindle: -5° to +45°
  • Spindle Taper: 5 MT
  • Spindle Diameter: 1.25”
$12,390
As low as $402.67/mo

  • Sanding belt size: 6″ x 108″
  • Motor: 1.5 HP (1-Phase)
  • Front table: 37″ x 7 ¾”
  • Side table: 19″ x 12″
$3,360
As low as $109.20/mo

First opening in 1991 and since then have become an internationally acclaimed brand and a pioneer of the global market. They are located in Antalya, Turkey. Cantek is a big supplier of solid wood and panel machinery. They have made a big expansion in their company in the past 31 years in the woodworking machinery industry. 

If you are interested in woodworking saws or anything else Cantek has to offer please contact us. Here at Elite Metal Tools we work our hardest to satisfy all questions and have low prices.