Cantek

Cantek 12” Tilting Bed Horizontal Resaw HR300PBX

Conveyor belt size: 11.2” x 215”
Machine wheel dimensions: 28” Dia. x 2” Wide
Main motor (Resaw wheels): 30 HP
Variable feed speeds: 0~120 FPM (0~37 m/min)

$32,445.00

As low as $642/mo

View Details

Cantek 15HP 460V Three Phase Bottom Cutting Straight Line Ripsaw R16

Maximum Sawblade Diameter: 14”
Maximum Cutting Thickness: 3”
Sawblade Bore: 2"
Number of Pressure Rolls: 8 rolls

$24,885.00

As low as $492/mo

View Details

Cantek 3 HP Single Phase Dust Collector UFO-102B

CFM: 1883
Motor: 3HP
Main inlet dia.: 6″
Bag volume (cu.ft.): 10.48

$1,365.00

As low as $44/mo

View Details

Cantek 10HP 230V 18” Non-Ferrous Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS18M

Cutting Capacity (Thickness x Width): 2″ x 12″, 3″ x 11″, 4″ x 10″
Cycle Speed: 45 strokes/min
Cycle Operation: Air
Saw Blade Size (Optional): 18″

$9,345.00

As low as $303/mo

View Details

Cantek 5HP 230V Three Phase 12” Tilt Arbor Table Saw TA12

Max. depth of cut at 90°: 4″
Max. depth of cut at 45°: 2 3/4″
Table size: 48″x30″
Table height: 34 1/4″

$3,675.00

As low as $119/mo

View Details

Cantek 230V Three Phase Bandsaw/Resaw Feeder AF-19N

Number of rollers: 2 (7-7/8″ dia.)
Feed speeds: 10
Motor: 1/2 HP (230/3/60)
Max. roller stroke: 8″

$3,990.00

As low as $129/mo

View Details

Cantek 5 HP Three Phase 10” Tilt Arbor Table Saw TA10

Table size: 36″x27″
Max. rip to right of blade: 50″
Max. depth of cut at 90°: 3″
Max. depth of cut at 45°: 2″

$3,045.00

As low as $98/mo

View Details

Cantek 24” Bandsaw Resaw 5 HP Three Phase Motor HB-600A

2 in 1 machine for rip and curve band sawing
Saw Wheel Diameter: 24″
Table Size: 31-1/2″ x 23-3/4″
Throat Capacity: 22-7/8″

$6,195.00

As low as $201/mo

View Details

Cantek Standard Three Phase Automatic Edgebander with Pre-milling MX350M

Feeding speed: 23 FPM (7 m/min.)
Panel thickness: 0.472~1.77” (12~45 mm)
Edge thickness: 0.0158”~0.118” (0.4 ~ 3 mm)
Working table height: 33.7” (856mm)

$22,995.00

As low as $455/mo

View Details

Cantek Classic S 20HP 230V Three Phase 36" x 60" Two Head Wide Belt Sander S372

Feed Motor: 1 HP
Working Width: 37″
Minimum Part Length: 12.5″
Maximum Thickness Opening: 5″

$24,675.00

As low as $488/mo

View Details

Cantek 20HP 230V 36” Pneumatic Cut-Off Saw with Foot Pedal (LH or RH) PCS36

Cutting Capacity (Thickness x Width): 2″x33″, 4″x31″, 6″x29″, 8”x25”, 10”x20”, 12”x12”
Cycle Speed: 10-15 strokes/min
Cycle Operation: Pneumatic
Saw Blade Size: 36”

$26,250.00

As low as $519/mo

View Details

Cantek 2HP 115V Single Phase 4,400 lb. Capacity 3ft x 6ft Scissor Lift PH36-2

Deck Size: 35” x 71”
Lowered Height: 12”
Raised Height: 59”
Travel: 47”

$6,510.00

As low as $211/mo

View Details

Cantek 7.5 HP Three Phase Dust Collector UFO-105B

CFM: 3673
Motor: 7.5 HP
Main inlet dia.: 8″
Bag volume (cu.ft.): 26.2

$3,400.00

As low as $110/mo

View Details

Cantek Professional SR 230V Three Phase 52” Widebelt Sander SR52DA

Abrasive belt size: 52” x 75”
1st Main motor: 25 HP
Minimum part length: 16.9"
Maximum thickness opening: 4.7"

$62,160.00

As low as $1,230/mo

View Details

Cantek 10HP 460V Semi-Optimizing Automatic Defect Cut-Off Saw CFS100

Max. Cutting Range (W x H) – 11.8” x 2.75” OR 5.9” x 3.9” with 18” Blade
Saw Spindle Speed: 3200 RPM
Feed Motor (Servo Motor): 2.7HP
Max. Feed Speed: Variable to 262 ft/min

$58,065.00

As low as $1,149/mo

View Details

Cantek 5 HP Three Phase Dust Collector UFO-103B

CFM: 2683
Motor: 5 HP
Main inlet dia.: 7″
Bag volume (cu.ft.): 20.94

$2,099.00

As low as $68/mo

View Details

Cantek 3HP 460V 2.25” Drawer Notcher JEN60

Notch Dimensions: 2.25” x 0.5” high
Cutter Diameter: 10”
Drill Diameter: 0.25”
Table Size: 49” x 22”

$11,025.00

As low as $358/mo

View Details

Cantek 10HP 460V 18” Non-Ferrous Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS18M

Cutting Capacity (Thickness x Width): 2″ x 12″, 3″ x 11″, 4″ x 10″
Cycle Speed: 45 strokes/min
Cycle Operation: Air
Saw Blade Size (Optional): 18″

$9,660.00

As low as $313/mo

View Details

Cantek 24” Bandsaw Resaw 7.5 HP Three Phase Motor HB-600A

2 in 1 machine for rip and curve band sawing
Saw Wheel Diameter: 24″
Table Size: 31-1/2″ x 23-3/4″
Throat Capacity: 22-7/8″

$6,405.00

As low as $208/mo

View Details

Cantek 10’ Sliding Table with Powered Rise and Fall D405A

7.5 HP main motor with 1HP scoring motor
Motorized blade rise/fall
Motorized blade tilting with electronic angle display on control panel
Sliding table dimension: 126” x 15 ½”

$14,910.00

As low as $484/mo

View Details

Cantek 230V Single Phase 25” Wide Belt Sander C251

Abrasive belt size: 25” x 60”
Maximum width stock: 24”
Maximum thickness opening: 4”
Infeed table: 11-1/2”

$12,600.00

As low as $409/mo

View Details

Cantek Single Phase 230V Track Power Feeder AF-04

Motor: 1 HP 230V Single Phase
Feed Speeds: (4) 14.5 / 29 / 39 / 78 FPM
Belts: 44″ x 1/2″ x 3 pcs.
Roller Spacing: 4.2″ – 4.1″ – 3.9″ – 4.2″

$2,100.00

As low as $68/mo

View Details

Cantek 10HP 460V 18” Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS18

Cutting Capacity (Thickness x Width): 2″ x 12″, 3″ x 11″, 4″ x 10″
Cycle Speed: 45 strokes/min
Cycle Operation: Air
Saw Blade Size (Optional): 18″

$7,245.00

As low as $235/mo

View Details

Cantek 15HP 460V 30” Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS30

Cutting Capacity (Thickness x Width): 2″x27″, 4″x24″, 6″x21″, 8″x16″, 10”x10”
Cycle Speed: 10-15 strokes/min
Cycle Operation: Pneumatic
Saw Blade Size: 30”

$19,320.00

As low as $382/mo

View Details

First opening in 1991 and since then have become an internationally acclaimed brand and a pioneer of the global market. They are located in Antalya, Turkey. Cantek is a big supplier of solid wood and panel machinery. They have made a big expansion in their company in the past 31 years in the woodworking machinery industry.

If you are interested in woodworking saws or anything else Cantek has to offer please contact us. Here at Elite Metal Tools we work our hardest to satisfy all questions and have low prices.