Scotchman DO 150/240-24M 220V Single Phase Dual Operator 150 Ton Hydraulic Ironworker 037920

Features

• Dual Operator, 5 Stations
• Dual operator allows for two operators to work at the same time at full capacity
• 150 Ton punch station
• Keyed punch ram for safety
• Punch gauging table with fence and scale
• Die holder complete with 2" die insert
• Punch nut with wrench & stripper
• Adjustable swing-away stripper
• One round punch & die: max. diameter 1-1/4"
• Jog control
• Two adjustable electric stroke controls with scale
• Two electric remote foot pedals
• Tandem Hydraulic Pump
• Two valves
• Angle shear
• Rectangle notcher with table, scale, and guides
• Flat bar shear with sabre blade
• Shear table with miter fence
• Tool table work area
• Slug receptacles
• Electrical box supplied with emergency palm button and lock-out tag-out accommodations
• All guards necessary to comply with ANSI B11.5 safety standards
• Forklift accommodations
• Warranty: Three years on parts
• Made in USA

Specifications

• Punching Capacity: 150 ton 1-11/16" in 1", 2-1/2" in 3/4"
• Special Tooling: 4" Max. Dia.       
• Throat Depth: 12"
• Flat Bar Shear (Sabre Blade - Standard):
  • 24" Length
  • 1" x 14"
  • 3/4" x 24"
• Angle Shear 90 degree: 6" x 6" x 1/2"     
• Angle Shear 45 degree w/Tool: 3" x 3" x 3/8"
• Angle Shear 45 degree w/Bar Shear: 4" x 4" x 1/2"            
• Brake 12": 90 ton            
• Brake 24": 70 ton
• Open End Brake: Max. 1/4" x 5" [Flat or Angle Iron]         
• Pipe Notcher Schedule 40: 3/4", 1", 1-1/4", 1-1/2", 2"     
• Rectangle Notcher: 3" x 5-3/4" x 1/2"     
• 90 degree V-Notcher:
  • 6" x 6" x 5/16"
  • 3" x 3" x 1/2"     
• Notching in Leg of Channel: 6" to 10"      
• Channel Shear: 2" to 6" adj.        
• Unistrut Shear: Samples Required           
• Rod Shear Round (max.): 9 Cavity - 1/4" to 1-1/4"
• Rod Shear Square (max.): 1 Cavity - 1/4" to 1"     
• Square Tube Shear: 1/2" to 2" 12 gauge
• Picket Tool: 1/2", 3/4", 1" 16 gauge        
• Weld Coupon Bender (max.): 2" wide x 3/8"
• Offset Die Holder: Max. 40 ton
• Strokes per Minute in Light Material: 44 spm [Punch Station] 1/4" Stroke
• Strokes per Minute in Heavy Material: 17 spm [Punch Station] 3/4" Stroke
• Hydraulics: 3,500/3,500 psi
• Motor: 10 hp, 220 Volt, Single Phase
• Dimensions (L x W x H): 83" x 38-1/2" 76-1/4"
• Shipping Weight (may vary): 6,404 lbs.

Optional Tooling

• Rod Shear
• Pipe Notcher
• Picket Tool
• Unistrut Shear
• LED Lights
• Weld Coupon Bender
• Tool Table Extension with Punch & Die Storage Drawer
• Punch Table Extension
• Custom Built Tool examples
• 24" x 5' Conveyor with Angle Iron Support
• Multi-Loc Punch Gauging Table
• Brake Table with Scale & Squaring Arm
• Hydraulic Hold Down
• Unequal Leg Angle Shear Blades
• Offset Die Holder
• Urethane Stripper
• Channel Shear
• 12" Brake
• Laser Light - Bar Shear
• 48" Back Gauge
• 90° V-Notcher
• Angle Shear Miter Guide
• Open End Brake
• Economy Punch & Die Package
• Deluxe Punch & Die Package
• 24" Brake
• Square Tube Shear
• Brake Length Gauge with Scale