BN Products

  • Bending Capacity #8 x 1 Bar
  • Bending Capacity #6 x 2 Bars
  • Bending Capacity #5 x 3 Bars
  • 5HP Motor
$12,825.00
$10,420.30
  • Cut / Bend Speed: 3 seconds /180 degree bend in 7 seconds
  • Bending Roller: 2.42" Diameter
  • Rebar Capacity: Up to #5 Grade 60
  • Cut and bend rebar for in-place rebar or stationary fabrication applications
$4,564.73
$3,708.80
  • Maximum Bending Diameter: 5/8" #5 Rebar - Grade 60
  • Bending Angle / Speed:  0 - 135 degrees / 8 Seconds
  • Removable bending guide for repeating the same angle bend
  • Includes a steel carrying case with hydraulic oil and a tool kit
$3,575.67
$2,905.25
  • Maximum Bending Diameter:  5/8" (#5) Rebar Grade 60
  • Bending Angle / Speed:  Up to 180 degrees / 5 seconds
  • Two preset angle locks for repeating the same angle bend
  • Complete with set of (6) bending rollers in a steel carrying case, a tool kit, and a standard foot pedal control
$5,242.96
$4,259.00
  • Capacity: #8 (1”), Grade 60 Rebar
  • Minimum Spiral Bending ø: 11"
  • Motor: 5 hp (3.7 kW), 60 Hz, 240/415V 3-phase AC
  • Gear Motor Type: Planetary Gear Motor
$15,750.00
$12,796.90
  • Includes battery charger
  • Includes 2 batteries
  • Includes 4 spools of wire
  • Ties #8 x #8
$2,432.21
$1,976.20
  • Maximum Cutting Diameter:  5/8" #5 Rebar - Grade 60
  • Cutting Speed / Pressure:  2 Seconds / 13 Tons Tool
  • Effortless medium-duty applications on vertical and horizontal rebar cutting applications
  • Complete in a carrying case with hydraulic oil and a tool kit
$1,477.12
$1,199.05
  • Maximum Bending Diameter:  #8 (1") Grade 60
  • Bending Angle:  0 – 180 degrees
  • Bending Speed:  9 Seconds for 180 degree bend
  • Complete with (9) bending rollers in two steel carrying cases, a tool kit, a bender cover, and a standard foot pedal control
$7,592.13
$6,168.65
  • Power (Max) 5500W
  • Power (Rated) 5000W
  • Frequency 60 Hz
  • Starting Type Electric
$1,603.06
$1,495.00
  • Power (Max) 8000W
  • Power (Rated) 7500W
  • Frequency 60 Hz
  • Starting Type Key Electric (with back-up pull start)
$1,716.26
$1,625.00
  • Cutting Capacity #10 x 1 Bar
  • Cutting Capacity #6 x 2 Bar
  • 5HP Motor
  • 1400 RPM
$11,812.50
$9,597.70
  • Rebar Capacity:  Grade 60 Up to #8 (1") rebar
  • Bending Speed:  180 degree bend in 9 seconds
  • Cutting Speed:  3 seconds
  • Includes two steel cases with nine bending rollers and a foot pedal control switch
$13,961.53
$11,343.75
  • Blade Size: 4.375"
  • Blade Type: Tungsten Carbide Tipped (2 ea.)
  • Can cut a variety of materials including rebar, all-thread rod, coil rod, EMT conduit, pipe, tubing, burglar bars and more
  • Designed to cleanly cut the material flush with the surface
$425.20
$395.00
  • Max. Cutting:  #6 or ¾” Grade 60
  • Max. Bending:  #7 or 7/8″ Grade 60
  • Bender Power:  115 Volt 50/60 Hz -12 amps
  • Unit includes DBD-25X bender, DC-20WH cutter, BCSE-25X combination stand, roller set & foot pedal
$10,085.72
$8,194.65
  • Power (Max) 7000W
  • Power (Rated) 6500W
  • Frequency 60 Hz
  • Starting Type Electric
$1,683.30
$1,595.00
  • Bending Capacity #10 x 1 Bar
  • Bending Capacity #6 x 2 Bars
  • Bending Capacity #4 x 3 Bars
  • 5HP Motor
$13,500.00
$10,968.75
  • Maximum Cutting Diameter:  1-1/4" #10 Rebar - Grade 60
  • Cutting Speed / Pressure:  7 Seconds / 45 Tons
  • Voltage/Amperage:  115V 50/60Hz / 18 amps
  • The DC-32WH cutter is ideal for bridge and highway work, and in small rebar fabrication shops
$3,991.83
$3,243.40
  • Max. Cutting:  #8 or 1 ” Grade 60
  • Max. Bending:  #9 or 1-1/8″ Grade 60
  • Cutter Power:  115 Volt 50/60 Hz -12 amps
  • Rebar cutter can be easily removed and used in any portable application or locked into a stationary position
$16,707.24
$13,574.65
  • Max. Cutting:  #10 or 1-1/4″ Grade 60
  • Max. Bending:  #9 or 1-1/8″ Grade 60
  • Cutter Power:  115 Volt 50/60 Hz -18 amps
  • Bends rebar from 0 -180 degrees
$18,003.53
$14,627.90
  • Max. Cutting:  #8 or 1" Grade 60
  • Max. Bending:  #7 or 7/8″ Grade 60
  • Bender Power:  115 Volt 50/60 Hz -12 amps
  • The DBD-25X bends rebar from 0 -180 degrees
$11,030.24
$8,962.05
  • Cutting Capacity #11 x 1 Bar
  • Cutting Capacity #8 x 2 Bars
  • 7.5HP Motor
  • 1400 RPM
$13,725.00
$11,151.55

First opened in 1982 and became a primary supplier and one of the most innovative. BN Products is located in Wickenburg, Arizona. They sell high-value portable rebar benders and portable rebar cutters. Their tools are specifically designed for the use of a professional contractor. 

If you are interested in high-value benders/cutters or if you have any questions about BN Products please contact us. Here at Elite Metal Tools we hold a high expectation for customer satisfaction with our products being at a low price.