Shapers

  • Worktable Dimensions: 47.2” x 30.7”
  • Spindle Tilting: -45.5° ÷ +45.5°
  • Spindle Height Diameter CE Ø 30-35 (40-50): 5.5” (6.3”)
  • Spindle Speed (at 50 Hz): 3000/4500/6000/7000/10000 rpm
  • 1 1/4" MK4 interchangeable spindle
  • Table Dimensions: 47.25" x 32"
  • Max Insert Opening: 12.5"
  • Table Height: 36"
  • Table Size: 31.5” x 39.4″
  • Spindle Speeds (5): 3000/4000/6000/8000/10000 RPM
  • Spindle Taper: 5 MT
  • Spindle Diameter: 1.25”
  • Spindle Direction is Reversible
  • 3 Spindle Speed
  • Min. CFM required--800 CFM
  • Table Height 36-1/2"
$4,915.00
$4,406.11
  • Table Size: 31.5” x 39.4″
  • Tilting Spindle: -5° to +45°
  • Spindle Taper: 5 MT
  • Spindle Diameter: 1.25”
  • Max. Shaping Capacity: 1" ~ 7" x 9"
  • Round Table Dia.: 18"
  • Shaping Cutter Dia.: 4" ~ 6"
  • Max. Cutter Length: 4"
  • Vertical Spindle Travel: 4"
  • Table Opening: 6-1/4"
  • Table Size: 32” x 26”
  • Motor: 1Ph 3HP, 220V
$3,315.00
$2,899.99
  • Maximum spindle height above table 5”
  • Maximum tool diameter, profiling & under table 9”
  • Maximum tool diameter, tenoning: 12.375”
  • Sliding table stroke 51.25”
  • Max. Cutter Height: 5"
  • Spindle Travel: 3-1/4"
  • Spindle Speeds: 3600, 5100, 8000, 10,000 RPM
  • Motor: 5 HP, 220V, Single Phase
  • Maximum Tool Diameter: 7” Below Table, 8” Above Table
  • Spindle Diameter: 1-1/4” and 3/4” Interchangeable
  • Vertical Spindle Travel: 4"
  • Spindle Direction: Reversible
$4,915.00
$4,406.11
  • Max. Work Thickness: 4"
  • Min. Work Width: 2"
  • Max Cutter Dia.: 8"
  • Shaper Motor: 7½ HP
  • Shaping Capacity Dia. (Round): 3” ~ 40”
  • Max Shaping Capacity (Rectangle): 15” x 36”
  • Table Outside Dia.: 27”
  • Shaper Motor: 7-1/2 HP
  • Shaping Capacity (Round): 24” ~ 100”
  • Max Shaping Capacity (Rectangle): 89.2” x 44.6”
  • Table Outside Dia.: 72”
  • Shaper Motor: 10 HP x 2
  • Motor: 7-1/2 HP, 220V/440V*, 3-phase
  • Table size: 35-1/2" wide x 28" deep
  • Table counterbore: 7" x 5/8" deep
  • Spindle travel: 3-1/4"
  • Shaping Capacity (Round): 15” ~ 80”
  • Max Shaping Capacity (Rectangle): 74.1” x 35.7”
  • Table Outside Dia.: 62”
  • Shaper Motor: 10 HP x 2
  • Max. Shaping Capacity: 6" ~ 22" x 26"
  • Round Table Dia.: 27"
  • Shaping Cutter Dia.: 4" ~ 5-3/4"
  • Max. Cutter Length: 5-1/2"
  • Shaping Capacity Dia. (Round): 3” ~ 28”
  • Max Shaping Capacity (Rectangle): 12.5” x 25”
  • Table Outside Dia.: 18”
  • Shaper Motor: 7.5 HP x 2
  • Shaping Capacity Dia. (Round): 6” ~ 62”
  • Max Shaping Capacity (Rectangle): 55” x 27-1/2”
  • Table Outside Dia.: 46”
  • Shaper Motor: 10 HP
  • Max Working Width: 14”
  • Minimum Working Length: 10”
  • Max Working Height: 5”
  • Shaper Motor: 5HP x 2
  • Max Working Length: 19-1/2”
  • Production Rate: 3 ~ 4 pcs/min
  • Spindle Motor: 5HP x 4
  • Range of Workpeice Width: ¾” ~ 6”
  • Max. Shaping Capacity: 1" ~ 12" x 19"
  • Round Table Dia.: 18"
  • Shaping Cutter Dia.: 4" ~ 5-3/4"
  • Max. Cutter Length: 5-1/2"
  • Max Working Length: 12”
  • Production Rate: 5 ~ 9 pcs/min
  • Spindle Motor: 5HP x 2
  • Range of Workpeice Width: ¾” ~ 6”