Cantek

Cantek Pneumatic 21 Spindle Line Boring Machine JB-21P

21 spindles driven by steel gears
Table size: 43 5/16” x 15 ¾”
Motor: 2 HP
Distance between spindles: 32mm

$7,140.00

As low as $232/mo

View Details

Cantek 7.5 HP Three Phase 8’ Sliding Table Saw with Scoring D405M-8

7.5 hp three phase main motor with 1 hp scoring motor
Max rip cutting width: 51.2”
Sliding table dimension: 102.4″ x 14.9″
Blade tilting adjustment: 0°~45°

$12,600.00

As low as $409/mo

View Details

Cantek 230V Three Phase 37” Two Head Wide Belt Sander with Variable Feed Speed C372

Abrasive belt size: 37” x 60”
Main motor (First head): 20HP
Max thickness opening: 5”
Feed speed (variable): 13 to 52 FPM

$29,085.00

As low as $575/mo

View Details

Cantek 230V Single Phase 36” Wide Belt Sander with 60” Belt C371

Abrasive belt size: 37” x 60”
Main motor: 10HP
Feed speed (variable): 13 to 52 FPM
Max thickness opening: 5”

$20,895.00

As low as $413/mo

View Details

Cantek 230V Three Phase 36” Wide Belt Sander with 60” Belt C371

Abrasive belt size: 37” x 60”
Main motor: 20HP
Feed speed (variable): 13 to 52 FPM
Max thickness opening: 5”

$20,199.00

As low as $399/mo

View Details

Cantek 10’ Sliding Table with Powered Rise and Fall D405A

7.5 HP main motor with 1HP scoring motor
Motorized blade rise/fall
Motorized blade tilting with electronic angle display on control panel
Sliding table dimension: 126” x 15 ½”

$14,910.00

As low as $484/mo

View Details

Cantek 9” x 138” Oscillating Edge Sander PW-120E

Working Capacity (LxH) 47” x 8”
Belt Size (LxH) 138 ½” x 9”
Sanding Belt Speed 1080 m/min (3544 FPM)
Motor 3HP: 230-volt 3 phase

$7,875.00

As low as $255/mo

View Details

Cantek 7.5HP Spindle Shaper with Sliding Table SS512CSB

Table Size: 31.5” x 39.4″
Spindle Speeds (5): 3000/4000/6000/8000/10000 RPM
Spindle Taper: 5 MT
Spindle Diameter: 1.25”

$10,710.00

As low as $348/mo

View Details

Cantek 10 HP Three Phase 24” Heavy Duty Planer with Spiral Cutterhead P630HV

Maximum planing width: 24-3/4"
Maximum planing thickness: 11-13/16"
Max. depth of cut: 5/16"
Table size: 27" x 34"

$16,800.00

As low as $332/mo

View Details

Cantek 15HP 460V 24” Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS24

Cutting Capacity (Thickness x Width): 2″x21″, 4″x19″, 6″x15″, 7″x8″
Cycle Speed: 40 strokes/min
Cycle Operation: Air / mechanical
Saw Blade Size: 24″ max. (20″ min.)

$14,385.00

As low as $467/mo

View Details

Cantek 0.67HP 230V Single Phase 4 Roll Variable Speed Power Feeder with Smart Stand DS400 (230V 1PH)

1/2 HP DC Brushless Servo Motor with electronic speed display
(4) rubber feed rollers
Range of Speeds (50Hz) (60Hz): 7-72 FPM
Rollers: Φ120 x 25 mm x 8 rolls (split)

$2,940.00

As low as $95/mo

View Details

Cantek 10HP 24” Miter Cut-Off Saw PCM610

Cutting Angles: +60° ~ 0° ~ -60°
Cycle Speed: 35-40 cuts/min
Saw Blade Size: 24″
Saw Arbor Diameter: 1″

$28,140.00

As low as $556/mo

View Details

Cantek 3 HP Single Phase 10” Tilt Arbor Table Saw TA10

Table size: 36″x27″
Max. rip to right of blade: 50″
Max. depth of cut at 90°: 3″
Max. depth of cut at 45°: 2″

$2,940.00

As low as $95/mo

View Details

Cantek 5 HP Three Phase 12” Spiral Head Jointer J127LH

Motor: 5 HP – 3 Phase
Max. cutting width: 12"
Max. depth of cut: 3/4"
Table size: 12 x 84" long

$7,245.00

As low as $235/mo

View Details

Cantek 50 HP 230V 12" Multi Ripsaw MRS-300

Maximum Cutting Width: 11.8” (300mm)
Saw Motor HP: 50 HP – Voltage 230/3/60
Feed Speeds: 25 – 100 FPM (7.5~30 m/min)
Table Size: 60″ x 30” (1530x760mm)

$37,170.00

As low as $735/mo

View Details

Cantek 60 HP 230V Multi Ripsaw MRS-12

Saw Motor: 60 HP 230 volt
Feed Speeds: 25 – 100 FPM
Table Size: 30” x 60″
Table Height from floor: 33.5″

$44,520.00

As low as $881/mo

View Details

Cantek 37” Bandsaw Resaw 10 HP Three Phase Motor HB-950A

Saw Wheel Diameter: 37″
Table size: 45-1/4” x 31-1/2″
Throat Capacity: 36-1/2″
Motor: 10 HP

$14,490.00

As low as $470/mo

View Details

Cantek 5 HP Three Phase 20” Planer with Spiral Cutterhead P20HV

Max. width: 20"
Max. thickness: 8-5/8"
Feed speed: 20 & 30 FPM
Main motor: 5 HP

$7,770.00

As low as $252/mo

View Details

Cantek Three Phase 230V High Frequency Automatic Edgebander MX340

Feeding speed: 29.5 FPM (9 m/min.)
Panel thickness: 0.315~1.77” (8~45 mm)
Edge thickness: 0.0158”~0.118” (0.4 ~ 3 mm)
Power: 7.4 HP Three Phase 230V

$22,785.00

As low as $450/mo

View Details

Cantek Classic S Single Phase 24" x 60" Wide Belt Sander S251

Abrasive Belt Size: 25” x 60”
Working Width: 25″
Minimum Part Length: 13″
Minimum Thickness Opening: 5″

$13,860.00

As low as $450/mo

View Details

Cantek Three Phase 230V High Frequency Automatic Edgebander with Pre-Milling MX350

Feeding speed: 29.5 FPM
Panel thickness: 0.472″~1.77″
Edge thickness: 0.0158″~0.118″
Working table height: 33.47″

$30,975.00

As low as $612/mo

View Details

Cantek 24” Bandsaw 3 HP Single Phase Motor HB-600R

Saw wheel diameter: 24″
Motor: 3 HP
Table Size: 31 ½" x 23 7/8"
Throat Capacity: 22 7/8"

$5,565.00

As low as $180/mo

View Details

Cantek 230V Three Phase 25” Wide Belt Sander C251

Abrasive belt size: 25” x 60”
Maximum width stock: 24”
Maximum thickness opening: 4”
Infeed table: 11-1/2”

$11,865.00

As low as $385/mo

View Details

Cantek 24” Heavy Duty Cardan Shaft Drive Double Surface Planer GT610HI

Max. Working Width: 24”
Max. Working Thickness: 8”
Min. Working Thickness: 5/16″
Min. Working Length: 12”

$67,620.00

As low as $1,338/mo

View Details

First opening in 1991 and since then have become an internationally acclaimed brand and a pioneer of the global market. They are located in Antalya, Turkey. Cantek is a big supplier of solid wood and panel machinery. They have made a big expansion in their company in the past 31 years in the woodworking machinery industry.

If you are interested in woodworking saws or anything else Cantek has to offer please contact us. Here at Elite Metal Tools we work our hardest to satisfy all questions and have low prices.