Cantek Three Phase 230V High Frequency Automatic Edgebander with Pre-Milling MX350

Description

The MX350 from Cantek is designed to be a compact, and durable edgebander offered at an affordable price. This machine is equipped with premilling, end trimming, flush trimming, PVC scraping, and buffing. User friendly controls and adjustments allow for efficient changeovers of edge tape thicknesses between 0.4mm & 3mm.

Features

• PLC control system with LED display and keypad
• Work-piece is fed by chain
• Edge coil support plate: Ø 800mm (31 1/2″), for PVC/ABS
• Edge feeding is Automatic edge feeding with a thickness capacity of 0.4–3 mm; strip material can be hand-fed
• Coiled edge bands up to 3 mm in thickness in Hard-PVC/ABS are cut with guillotine shears.
• Teflon-coated hot-melt glue pot
• Spring loaded pressure unit with (2) pressure rollers
• Pre-milling function can remove up to 3mm and is designed to provide an ideal edge for applying edge tape by cleaning up poorly cut panels.  Consist of (2) counter rotating diamond cutterheads for optimum cut results.
• High frequency 12000 RPM end trimming unit, with Ø100 mm (4″) TC-Saw blades
• High frequency 12000 RPM top & bottom trimmers with insert knife cutters for radius trimming & bevel trimming
• Radius scraper with 2mm radius
• 3000 RPM top & bottom buffing units
• Heavy duty pressure beam with extendable work-piece support
• Heated infeed fence for pre-heating the panel for optimum glue penetration

Specifications

• Feeding speed: 9 meters/min. (29.5 FPM)
• Panel thickness: 12~45 mm (0.472″~1.77″)
• Max. premill thickness: 32mm (1.25″)
• Edge thickness: 0.4 ~ 3 mm (0.0158″~0.118″)
• Min. panel width: 100mm (4″)
• Min. panel length: 170mm (6.7″)
• Working table height: 850mm (33.47″)
• Dust collection outlet: Ø 127 mm (5”) x 2
• Electrical consumption: 7.5 KW (10HP)
• Electrical requirement: 40 AMPS @ 230/3/60
• Machine weight: 660 kgs (1455 lbs)
• Shipping dimensions: 3450 x 660 x 1850 mm (114″ x 30″ x 54″)
• Shipping weight: 708 kgs (1560 lbs)
• Voltage: 230/3/60 (Voltage must be +/- 5%)

Motor

• Feeding motor: 0.75 kW
• Pre-milling motors (2 pcs): 1.1 kW each (12000 RPM)
• Glue spindle motor: 0.18 kW
• Front/rear trimming motor: 0.22 kW (12000 RPM)
• Upper trimming motor  : 0.37 kW (12000 RPM)
• Lower trimming motor: 0.37 kW (12000 RPM)
• Upper buffing motor: 0.12 kW (3000 RPM)
• Lower buffing motor: 0.12 kW (3000 RPM)
• Pre-heating: 0.4 kW
• Glue pot: 1.315 kW