BendPak 220V Single Phase 14,000 lbs. Super Tall 4-Post Lift BEN HD-14T

Description

The industrial-quality HD-14T is a full-sized lifting force designed specifically for parking higher-profile vehicles beneath the raised platform. With this four-post lift, you can push 14,000 lbs. worth of automobile into the air without breaking a sweat.

The HD-14T offers superior lifting power with an extended 82” rise, which means if BendPak was a clothing warehouse, this car lift would be found in BendPak’s “big and tall” section. Commercial fleets of trucks and vans will be right at home in your service bay with this model. Impress your customers by accommodating a wider variety than the competition, no matter what vehicles they bring in.

• Extended Runways
  • Longer runways are necessary for heavy-duty lifts. This four-post lift boasts runways long enough to handle large trucks and SUVs. Plus, longer runways prevent damage to the vehicle; BendPak also extends the approach ramps in order to protect the bottom-front of the chassis.
• Dual-Hub Cable Sheaves
  • BendPak cable sheaves are huge: 10.5” diameter sheaves and 2.25” diameter sheave axles, all kept within the runway and cross tubes. This cuts down on how much time and cash you have to spend on maintenance and general upkeep.
• Heavy-Duty Aircraft Cable
  • Each BendPak lift in this series features four, 1/2” diameter, 6 x 25 stainless-steel lifting cables that have an incredible breaking strength of over 14,000 lbs. each.
• Built-In Lubrication
  • Grease fittings on the sheaves and sheave axles ensure proper lubrication for these critical parts.
• Flow Restrictor
  • Keeping the runways level during rise is arguably the most important part of lifting a car. That’s why BendPak insists on upholding the best safety standards in the industry. The integrated flow restrictor ensures a slow, controlled descent in the very rare case of hydraulic hose failure.
• Large Base Plates
  • 10" x 12" base plates keep this four-post lift safe, stable, and always ready for service.
• Spring-Loaded Safety Locks
  • Automatic locks activate as the runways rise. Adjustable safety ladders make sure the ramps are level, even if there is a slight slope in the garage flooring. This incredibly useful safety precaution adds to the versatility of the lift.
• Push-Button Pneumatic Lock Release
  • With the push of a button, a pneumatic (air-powered) lock release lets operators lower the lift with ease. Aircraft-quality stainless steel and aluminum pneumatic cylinders are the most durable and trouble-free you’re bound to find on a car lift.
• Secondary Lock System
  • The all-important backup slack-cable detection system comes standard on this four-post lift (as well as every other lift BendPak makes). Others don’t have it. BendPak refuses to leave you without it. Peace-of-mind is everything in the lifting business, so they give it in spades.
• Integrated Design
  • Hidden internal components keep them protected from environmental damage, as well as human interference.
• Adjustable Height Locking Positions
  • Fully adjustable, multiple lock positions let you work at the height most convenient for you.
• Electric-Hydraulic Power System
  • Let the power system do the lifting while you worry about the work. A dependable, zero-maintenance system keeps all controls right at your fingertips.
• Longer Approach Ramps
  • The longer the approach ramp, the easier it is to load low-stance cars. High-clearance trucks and SUVs don’t usually have this concern, but BendPak is sure to keep your lift as versatile as possible.
• Flexible Protective Conduit
  • ALI-certified cable tubing protects against electric shocks. It also prevents wear and tear that occurs over time. Unprotected cables are a serious concern, and BendPak takes away the worry with their flexible, non-metallic tubing.
• Rolling Bridge Jacks
  • BendPak recommends the optional 7,000-lb. capacity rolling jack (model RJ-7), so you can perform wheel service on your lift. These frame-engaging jacks lift the vehicle off the four-post lift’s runway. Two jacks used together will let you raise all four wheels off the car lift at once!

Features

• 14,000-lb. lifting capacity
• Extra lift height
• Long-style approach ramps for low ground clearance vehicles
• Runways include rail-kit for optional accessories
• Single hydraulic cylinder mounted underneath runway
• Fully enclosed lifting cables, safety locks, and sheaves
• Internal anti-sway slider blocks in each column
• Pneumatic push-button safety release
• Features heavy-duty 1/2" aircraft cable
• Safety locks enclosed in columns minimize pinch points
• Hardened-steel sheaves with self-lubricating bearings
• Multi-position safety locks in each column
• Customizable power unit location
• Approach ramps incorporate built-in rear-wheel chocks
• Independent backup slack-cable safety latches
• Optional RJ-7 air-hydraulic bridge jacks increase service capability
• Warranty
  • 5 Years on Lift Structure
  • 2 Years on Hydraulic Cylinder(s) and Power Unit
  • 1 Year on Operating Components
  • 1 Year on Electrical Components (Excluding Power Unit)
  • 1 Year on Labor

Specifications

• Capacity
  • Lifting Capacity: 14,000 lbs. (6,350 kg)
  • Max Capacity / Front Axle: 7,000 lbs. (3,175 kg)
  • Max Capacity / Rear Axle: 7,000 lbs. (3,175 kg)
• Rise
  • Min. Runway Height: 7.625" (194 mm)
  • Max. Rise: 82" (2,083 mm)
  • Max. Lifting Height: 86.5" (2,197 mm)
  • Time to Full Rise: 65 seconds
• Dimensions
  • Runway Width: 20" (508 mm)
  • Length of Runways: 195" (4,953 mm)
  • Width Between Runways: 34.5" (876 mm) or 41.5" (1,054 mm)
  • Runway Centerline: 54.5" (1,384 mm) or 61.5" (1,562 mm)
  • Outside Edge of Runways: 74.5" (1,892 mm) or 81.5" (2,070 mm)
  • Width Between Columns: 115.5" (2,934 mm)
  • Drive-Thru Clearance: 98" (2,489 mm)
• Runways
  • Runway Width: 20" (508 mm)
  • Length of Runways: 195" (4,953 mm)
  • Width Between Runways: 34.5" (876 mm) or 41.5" (1,054 mm)
  • Runway Centerline: 54.5" (1,384 mm) or 61.5" (1,562 mm)
  • Outside Edge of Runways: 74.5" (1,892 mm) or 81.5" (2,070 mm)
• Minimum Wheelbase
  • Rated Capacity: 140" (3,556 mm)
  • 75% Capacity: 120" (3,048 mm)
  • 50% Capacity: 100" (2,540 mm)
  • 25% Capacity: 80" (2,032 mm)
• Locking
  • Locking Positions: 16
  • Lock Spacing: Every 4" (102 mm)
• Power Unit
  • Motor: 220 VAC / 60 Hz / 1 Ph
  • Noise: 45 dB
• Shipping
  • Weight: 2,450 lbs. (1,111.3 kg)
  • Dimensions: 200'' x 21'' x 42'' (5,080 mm x 533 mm x 1,066 mm)

Options

• 5150029 – LITESTIX™ LS36SMD: Lithium Rechargeable Underhood Work Light / 1,200 Lumens
• 5210438 – WSA-100 – Air-Electric Workstation / Fits BendPak 2-Post & 4-Post Lifts
• 5150509 – Rolling Oil Drain Pan – 15 Gallon Rolling Drain Pan For 4-Post Lifts
• 5175349 – JP-6 – 6,000-lb. Capacity / Telescoping Sliding Jack Platform
• 5175801 – Boat Trailer Platform – 3,000-lb. Capacity / Telescoping Boat Trailer Tongue Platform
• RJ-7: 7,000-lb. capacity rolling jack