BendPak 220V Single Phase 14,000 lbs. Standard Heavy Duty 4-Post Lift BEN HDS-14

Description

BendPak's HDS-14 four-post lift is a whole new breed of rugged. It features superior components that work better, are built to last and increase operator safety. If your service bay needs to get under heavy-duty, oversized vehicles on a daily basis, this lift is what you need.

BendPak's HDS-14 four-post lift is engineered to meet the strenuous demands of your toughest professional lifting applications. Incorporated into every lift is a laundry list of key features as long as your arm, ensuring BendPak lifts remain the absolute best.

BendPak’s competitors might say they overdo it, but BendPak doesn't include components for the sake of frills and flash. They designed this four-post lift with the attributes they feel should be considered standard, not add-ons or extras. You can always count on BendPak lifts for increased durability, safety, and productivity. Spend less time worrying about what you're working under and more time doing what you love. BendPak’s commercial-grade car lifts are second to none and recognized worldwide as the industry benchmarks in dependability and quality.

• Extended Runways
  • 14,000-lb. vehicles have wheelbases that need specialized equipment to keep them safe and supported. BendPak’s extended runways prevent wear and tear on your vehicle. Driving onto the runway is safe and simple for vehicles of all sizes.
• Dual-Hub Cable Sheaves
  • Dual-hub cable sheaves reduce stress, fatigue, and wear. Huge 10.5” diameter cable sheaves within the runway and cross tubes combine with massive 2.25” diameter sheave axles. This dramatically improves cable wear and critical component lifespan, which means less money in service-related expenses down the road.
• Heavy-Duty Aircraft Cable
  • This lift features four, 1/2” diameter, 6 x 25 stainless-steel lifting cables that have a breaking strength of over 14,000 lbs. each. This aircraft-quality cable was specifically designed for lifting applications and provides a great balance between abrasion resistance and fatigue.
• Built-In Lubrication
  • Grease fittings are located on every sheave and sheave axle to help keep these critical parts well-lubricated and simplify periodic maintenance.
• Flow Restrictor
  • An integrated hydraulic flow restrictor provides a controlled descent in the unlikely event of an unexpected hose rupture.
• Large Base Plates
  • 10" x 12" base plates provide a solid foundation for every 14K capacity four-post lift.
• Spring-Loaded Safety Locks
  • Safety locks automatically engage continuously during rise, and adjustable safety ladders allow for precise runway leveling, even when installed on sloped floors. This is a crucial feature because even small slopes can impact the safe-keeping of your garage or service bay.
• Push-Button Pneumatic Lock Release
  • A simple push-button pneumatic lock release makes lowering operations simple and fast. Aircraft-quality stainless steel and aluminum pneumatic cylinders provide years of trouble-free service.
• Secondary Lock System
  • A secondary lock system is on constant guard and acts as a slack-cable device in the unlikely event your four-post lift experiences an unexpected cable failure.
• Integrated Design
  • Lifting cables, airlines, safety latches and sheaves are all fully enclosed within the structure. That doesn’t mean they’re hard to find; you’re always able to look in and perform a visual inspection during operation.
• Adjustable Height Locking Positions
  • Each column features multiple height locking positions for variable-height parking and infinite leveling.
• Electric-Hydraulic Power System
  • A maintenance-free electric hydraulic power system assures ultimate dependability. All operator controls are conveniently located within easy reach. Raising and lowering the arms should be as easy as pushing a button—and it is!
• Longer Approach Ramps
  • These approach ramps were designed a little longer to help when loading low ground-clearance vehicles. It's the little bit that makes a big difference.
• Flexible Protective Conduit
  • Hydraulic hoses and airlines, if not properly managed, can be a legal and functional nightmare. ALI inspectors routinely write citations and refuse to pass inspected lifts because of visible damage to cables. BendPak routes all their cables through flexible, non-metallic tubing that protects against electrical shocks from worn cables, as well as general wear that occurs from heavy use over time.
• Rolling Bridge Jacks
  • Optional 7,000-lb. capacity rolling jacks (model RJ7W) make a great addition. RJ7W bridge jacks are used to raise the front or rear portion of a vehicle off the runways, allowing operators to perform efficient wheel and brake service. A pair of jacks allows the entire vehicle to elevated. Each jack has telescoping arms with frame contact pads that can be extended over the runways and positioned under vehicle lifting points. Telescoping rail supports accommodate adjustable runways for different tread widths. Each jack features three safety-lock positions, as well as stackable truck and van adapters for increased lifting height and better access to frame contact points on high ground-clearance vehicles. The jacks come equipped with a commercial grade air-hydraulic pump requiring a maximum pressure of 125 PSI and 10 – 20 CFM.
• Choose Extended Length
  • A longer lift is useful for vehicles like limos, SUVs, and trucks, and that’s where the HDS-14X extended 4-post lift comes in handy. BendPak calls it their “limo style” lift because of how much front-to-back clearance it offers, so you can make it over or under the lift with ease. This lift adds additional versatility and craftsmanship to your garage.
• Choose Open-Front Design
  • BendPak engineered the HDSO14P open-front ​4-post lift without a front cross bar, so operators can easily enter and exit from beneath the vehicle. Now the process of front-end adjustment becomes quick and trouble-free. This specialty car lift is a must for busy service bays.

Features

• 14,000-lb. lifting capacity
• CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN-1493
• Mid to long-style approach ramps for low ground clearance vehicles
• Runways include rail-kit for optional accessories
• Single hydraulic cylinder mounted underneath runway
• Fully enclosed lifting cables, safety locks and sheaves
• Internal anti-sway slider blocks in each column
• Pneumatic push-button safety release
• Features heavy-duty 1/2" aircraft cable
• Safety locks enclosed in columns minimize pinch points
• Oversized sheave diameter reduces cable fatigue
• Oversized self-lubricating cable rollers
• Rugged 1.75" roller axles
• Multi-position safety locks in each column
• Customizable power unit location
• Approach ramps incorporate built-in rear-wheel chocks
• Independent backup slack-cable safety latches
• ETL approved
• Warranty
  • 5 Years on Lift Structure
  • 2 Years on Hydraulic Cylinder(s) and Power Unit
  • 1 Year on Operating Components
  • 1 Year on Electrical Components (Excluding Power Unit)
  • 1 Year on Labor

Specifications

• Capacity
  • Lifting Capacity: 14,000 lbs. (6,350 kg)
  • Max Capacity / Front Axle: 7,000 lbs. (3,175 kg)
  • Max Capacity / Rear Axle: 7,000 lbs. (3,175 kg)
• Rise
  • Min. Runway Height: 7.5" (191 mm)
  • Max. Rise: 70" (1,778 mm)
  • Max. Lifting Height: 77.5" (1,969 mm)
  • Time to Full Rise: 60 seconds
• Dimensions
  • Overall Width: 131.75" (3,346 mm)
  • Outside Length: 213" (5,410 mm)
  • Overall Length: 241" (6,121 mm)
  • Height of Columns: 92" (2,337 mm)
  • Width Between Columns: 120" (3,048 mm)
  • Drive-Thru Clearance: 98" (2,489 mm)
• Runways
  • Runway Width: 20" (508 mm)
  • Length of Runways: 203" (5,156 mm)
  • Width Between Runways: 34.5" (876 mm) or 41.5" (1,054 mm)
  • Runway Centerline: 56" (1,422 mm) or 63" (1,600 mm)
  • Outside Edge of Runways: 78" (1,981 mm) or 85" (2,159 mm)
• Minimum Wheelbase
  • Rated Capacity: 140" (3,556 mm)
  • 75% Capacity: 120" (3,048 mm)
  • 50% Capacity: 100" (2,540 mm)
  • 25% Capacity: 80" (2,032 mm)
• Locking
  • Locking Positions: 13
  • Lock Spacing: Every 4" (102 mm)
• Power Unit
  • Motor: 220 VAC / 60 Hz / 1 Ph
  • Noise: 45 dB
• Shipping
  • Weight: 2,668 lbs. (1210.2 kg)
  • Dimensions: 208" x 22" x 44" (5,283 mm x 558 mm x 1,117 mm)

Options

• 5150029 – LITESTIX™ LS36SMD: Lithium Rechargeable Underhood Work Light / 1,200 Lumens
• 5210438 – WSA-100: Air-Electric Workstation / Fits BendPak 2-Post & 4-Post Lifts
• 5150509 – Rolling Oil Drain Pan: 15 Gallon Rolling Drain Pan For 4-Post Lifts
• 5175349 – JP-6: 6,000-lb. Capacity / Telescoping Sliding Jack Platform
• 5175801 – Boat Trailer Platform: 3,000-lb. Capacity / Telescoping Boat Trailer Tongue Platform
• Drive-thru ramps
• Drip trays
• 7,000-lb. capacity rolling jacks