BendPak 220V Single Phase 14,000 lbs. Open-Front Alignment Lift BEN HDSO-14AX

Description

The HDSO14AX is an open-front, 14,000-lb. capacity alignment lift. The “open” design makes it easier to access the front turn plates and undercarriage and features front turn plates and rear slip plates built right into the runways. Wheels respond to adjustments with no resistance.

BendPak engineered the HDSO14AX alignment lift without a front crossbar, so operators can easily enter and exit from beneath the vehicle. Now the process of front-end adjustment becomes quick and trouble-free. This is a must for busy alignment bays. Additionally, for precise front-lift leveling, nothing beats BendPak’s patented, adjustable front outrigger tubes. The infinitely adjustable pitch compensates for excessive loads and sloped floors.

• Slip Plates
  • Rear-facing multi-caster slip plates and front-facing turn plates permit precise, free-floating alignment.
• Turn Plates
  • This alignment lift features two recessed turn plate pockets that let you freely position the corrosion-resistant, galvanized turn plates.
• Dual-Hub Cable Sheaves
  • BendPak alignment lifts include strong, durable, and oversized 10.5” diameter cable sheaves within the runway and cross tubes, as well as 2.25” diameter sheave axles. These powerful components keep your car lift running for many years, far past the point other brands’ lifts have already given out or required expensive parts replacements.
• Heavy-Duty Aircraft Cable
  • BendPak runs four aircraft-quality steel cables (that measure in at a robust 1/2” diameter, 6 x 25), within the columns. They are literally the ultimate standard for high-quality cable construction and safe lifting.
• Adjustable Height Locking Positions
  • Alignments are often done by different mechanics in a busy shop. The multiple locking heights allow different people to work on the HDSO14AX alignment lift at the height appropriate for them. Since it’s an open-front design, getting under is easy no matter how tall they are.
• Built-In Lubrication
  • Grease fittings are an essential component to every car lift BendPak makes. They keep the cable sheaves lubricated, so you don’t have to worry about productivity and safety in BendPak’s design.
• Flow Restrictor
  • Should anything catastrophic occur in your shop to disrupt the functionality of your lift, BendPak wants you to feel confident that BendPak keeps your vehicles and equipment safe. If the hydraulics are cut or lose all pressure, which would be extraordinary, the built-in hydraulic flow divider still ensures a safe, even descent at all times.
• Spring-Loaded Safety Locks
  • BendPak’s fully adjustable locks are also found on the HDSO14AX alignment lift. Springs engage as the lock ascends into position. This design also helps keep the platforms even, even if there’s a tiny slope to your garage flooring.
• Push-Button Pneumatic Lock Release
  • Air locks make releasing the locks simultaneous, each and every time. The instant release ensures the alignment lift platforms descend evenly.
• Secondary Lock System
  • A backup lock system protects the alignment system in the event that cable slack is detected. When this occurs, the cable is immediately “grabbed,” and the entire operation ceases immediately.
• Integrated Design
  • BendPak cables, cable sheaves and airlines run internally throughout the structure. Every one of these parts is susceptible to damage and extra wear if left exposed. BendPak keeps the look and feel of this alignment lift clean while protecting the most critical parts and components.
• Electric-Hydraulic Power System
  • The power unit never needs to be maintained or adjusted. It’s also so easy and safe to use, BendPak recommends it for both home and commercial applications.
• Longer Approach Ramps
  • Because BendPak’s approach ramps are longer, they make it easier to load low ground-clearance vehicles. So easy, in fact, that you’ll never scratch up the bottom of your car or struggle with the gas pedal to give enough gas without shooting onto the ramp at an unsafe speed. Simply glide on and start aligning.
• Flexible Protective Conduit
  • The durable conduit that surrounds the airlines and hydraulic hoses prevents damage to the cables. It also keeps you safe from electrical shock.
• Rolling Bridge Jacks
  • Rolling bridge jacks turn your alignment lift into an all-purpose four-post lift. No need to transfer to a different car lift to perform wheel and brake service. Now you can change brake rotors right before you align the wheels, all on the same lift. Rolling bridge jacks are a safe and space-saving way to increase shop capability without purchasing more equipment.

Features

• 14,000-lb. lifting capacity
• CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN-1493
• Heavy‐duty turn plates and integrated rear slip‐plates included
• Multi‐position turn plate pockets
• Automatic leveling system
• Multiple auto-leveling locking positions
• Runways include rail‐kit for optional accessories
• Electric / hydraulic power system
• Single hydraulic cylinder mounted underneath runway
• Fully enclosed lifting cables, safety locks, and sheaves
• Internal “Anti-Sway” UHMW slider blocks in each column
• Features oversize sheaves and heavy‐duty 1/2” aircraft cable
• Rugged 1‐3/8” roller axles and oversize self‐lubricating cable sheaves
• Multi‐position safety locks in each column with push‐button safety release
• Optional 7,000-lb. capacity bridge jacks available (Model RJ‐7) 14,000-lb. lifting capacity
• Warranty
  • 5 Years on Lift Structure
  • 2 Years on Hydraulic Cylinder(s) and Power Unit
  • 1 Year on Operating Components
  • 1 Year on Electrical Components (Excluding Power Unit)
  • 1 Year Labor

Specifications

• Capacity
  • Lifting Capacity: 14,000 lbs. (6,350 kg)
  • Max Capacity / Front Axle: 7,000 lbs. (3,175 kg)
  • Max Capacity / Rear Axle: 7,000 lbs. (3,175 kg)
• Rise
  • Min. Runway Height: 7.625" (194 mm)
  • Max. Rise: 70" (1,778 mm)
  • Max. Lifting Height: 77.625" (1,972 mm)
  • Time to Full Rise: 60 seconds
• Overall Width (FRONT): 143” (3,632 mm)
• Overall Width (REAR): 130” (3,301 mm)
• Outside Length: 215" (5,472 mm)
• Overall Length: 243" (6,191 mm)
• Height of Columns (FRONT): 105" (2,664 mm)
• Height of Columns (REAR): 103” (2,613 mm)
• Width Between Columns (FRONT): 123” (3,124 mm)
• Width Between Columns (REAR): 120” (3,046 mm)
• Drive-Thru Clearance: 97” (2,464 mm)
• Runway Width: 20.5” (520 mm)
• Length of Runways: 199" (5,054 mm)
• Width Between Runways: 45" (1,143 mm)
• Min. 4-Wheel Alignment: 89" (2,261 mm)
• Max. 4-Wheel Alignment: 156" (3,962 mm)
• Max. 2-Wheel Alignment: 175" (4,445 mm)
• Minimum Wheelbase
  • Rated Capacity: 140" (3,556 mm)
  • 75% Capacity: 120" (3,048 mm)
  • 50% Capacity: 100" (2,540 mm)
  • 25% Capacity: 80" (2,032 mm)
• Locking
  • Locking Positions: 13
  • Lock Spacing: 4
• Power Unit
  • Motor: 220 VAC / 60 Hz / 1 Ph
  • Noise: 45 dB
• Shipping
  • Weight: 3,586 lbs. (1,626 kg)
  • Dimensions: 240'' x 23'' x 41'' (6,096 mm x 584 mm x 1,041 mm)

Options

• 5150029 – LITESTIX™ LS36SMD: Lithium Rechargeable Underhood Work Light / 1,200 Lumens
• 5700236 – Deluxe Turnplate Set: Deluxe Alignment Turnplates / Aluminum-Stainless / 18.5" x 18.5" / SET OF 2
• 5210438 – WSA-100: Air-Electric Workstation / Fits BendPak 2-Post & 4-Post Lifts
• 5150509 – Rolling Oil Drain Pan: 15 Gallon Rolling Drain Pan For 4-Post Lifts
• 5175349 – JP-6: 6,000-lb. Capacity / Telescoping Sliding Jack Platform
• 5175801 – Boat Trailer Platform: 3,000-lb. Capacity / Telescoping Boat Trailer Tongue Platform
• 5174009 – Airline Kit: Integrated Rolling Bridge Airline Kit
• 5215306 – Air Bottle: Compressed Air Bottle for 4-Post Lifts Safety Locks
• 7,000-lb. capacity bridge jacks